Victory Screw in Back Weights .245 Dia. 20 gr. 12 pk. Review

The Victory Screw in Back Weights .245 Dia. 20 gr. 12 pk. Made a Bold First Impression

For years, I’ve fine-tuned my archery setup, chasing that perfect balance between speed, accuracy, and penetration. Achieving optimal Front of Center (FOC) is crucial for arrow flight and downrange performance, and the Victory Screw in Back Weights .245 Dia. 20 gr. 12 pk. promised an easily adjustable solution. This offering from Victory Archery arrived with the promise of allowing minute adjustments to my arrow setup with minimal fuss.

My journey to these weights started with a persistent problem: wind drift at longer distances. I noticed my arrows consistently veering off course, even with minor gusts. I had read how tweaking the FOC can improve wind resistance, leading me down the rabbit hole of arrow customization. The Victory weights were chosen because of their screw-in design, ease of use and the ability to incrementally adjust my arrow weight and FOC.

Unboxing the weights, I was immediately struck by their small size and precise machining. They felt solid and well-made, inspiring confidence in their durability. The anodized finish looked clean and professional, suggesting a high level of quality control. Each weight was individually separated in the packaging ensuring no damage occurred during shipping.

I considered several alternatives, including brass inserts and weight tubes. However, the Victory weights stood out due to their convenient screw-in design and compatibility with my Victory VForce arrows. These offered a more straightforward solution compared to more complex modifications. I’ve used weight tubes in the past and they are messy, time consuming and permanent.

My initial impression was one of cautious optimism. The simplicity of the design was appealing, but I wondered if 20 grains would be enough to make a noticeable difference. It felt like the weights could be a quick and easy way to fine tune my setup or could be a waste of money. Only time and testing would tell.

Real-World Testing: Putting Victory Screw in Back Weights .245 Dia. 20 gr. 12 pk. to the Test

First Use Experience

My first test took place at my local outdoor archery range, a familiar environment where I could focus solely on the performance of the weights. The range offers distances from 20 to 80 yards, perfect for assessing arrow flight. The weather was slightly breezy, presenting a good opportunity to evaluate wind resistance.

Installing the weights was incredibly easy. Simply unscrew the existing end cap from the back of my arrow and screwed in the Victory weight. No special tools were required, and the process took only a few seconds per arrow. This allowed me to make quick adjustments between shots.

Immediately, I noticed a slight change in arrow flight. Arrows seemed to stabilize faster, resulting in tighter groupings at 40 and 60 yards. The impact point shifted slightly downwards, as expected with the added weight at the rear. The wind drift was noticeably reduced, though not entirely eliminated, which was a promising start.

No immediate issues presented themselves, besides having to re-sight my bow for the change in weight. After shooting about a dozen arrows, all the weights remained securely fastened, demonstrating the quality of the threads. I did notice they can be easy to lose in the grass so keeping spares around is crucial.

Extended Use & Reliability

After several weeks of consistent use, the Victory Screw in Back Weights .245 Dia. 20 gr. 12 pk. have proven to be a valuable addition to my archery setup. The weights have remained securely in place, even after hundreds of shots. I have not noticed any signs of loosening or damage to the threads.

The anodized finish has held up remarkably well, showing no signs of wear or corrosion. The weights have been exposed to various weather conditions, including rain and humidity, without any adverse effects. This speaks volumes about the quality of the materials and the manufacturing process.

Maintenance is virtually non-existent. I occasionally wipe them down with a clean cloth to remove any dirt or debris. I have also checked the threads periodically to ensure they remain clean and undamaged. These back weights require almost no maintenance at all.

Compared to my previous experiences with other weighting systems, the Victory weights are a clear winner. They are far more convenient and adjustable than brass inserts, and they eliminate the mess associated with weight tubes. The ability to quickly add or remove weight allows for unparalleled fine-tuning. These weights exceeded my expectations.

Breaking Down the Features of Victory Screw in Back Weights .245 Dia. 20 gr. 12 pk.

Specifications

The Victory Screw in Back Weights .245 Dia. 20 gr. 12 pk. are designed to fine-tune arrow balance and FOC. Here’s a breakdown of their key specifications:

• Diameter: .245 inches. This diameter is specifically designed to fit Victory VForce and VForce TKO arrow shafts.
• Weight: 20 grains per weight. This incremental weight allows for precise adjustments to arrow spine and balance.
• Quantity: 12 weights per pack. A generous quantity ensures you have enough weights to experiment with different arrow configurations.
• Material: High-quality metal alloy. This material provides durability and resistance to wear and corrosion.
• Design: Screw-in design. The screw-in design allows for easy installation and removal without specialized tools.

These specifications matter because they directly impact the performance and user experience. The .245 diameter ensures a snug and secure fit within compatible arrow shafts. The 20-grain weight increment provides the flexibility needed to optimize arrow flight for different shooting conditions. The quality of material used will also affect the longevity of the product.

Performance & Functionality

The Victory Screw in Back Weights .245 Dia. 20 gr. 12 pk. excel at their primary function: fine-tuning arrow balance. By adding weight to the rear of the arrow, the FOC is reduced, resulting in improved wind resistance and stability. These weights provide measurable results.

The weights perform exceptionally well in windy conditions, helping to minimize arrow drift. They also improve arrow recovery, allowing for tighter groupings at longer distances. The screw in design allows for quick adjustments and removal.

One potential weakness is the limited weight increment. 20 grains may not be sufficient for archers seeking more drastic changes in arrow balance. It would be nice to have more weight options in the package. However, for fine-tuning, the 20-grain increments are ideal.

Overall, the Victory weights meet and exceed expectations. They are a simple yet effective solution for optimizing arrow flight and improving accuracy. I achieved tighter groupings and improved wind resistance.

Design & Ergonomics

The Victory Screw in Back Weights .245 Dia. 20 gr. 12 pk. boast a simple, yet effective design. The screw-in mechanism is intuitive and easy to use, requiring no specialized tools. The small size and lightweight construction ensure they do not significantly alter the arrow’s overall weight or profile.

The weights are well-machined, with clean threads and a smooth finish. They feel solid and durable, inspiring confidence in their longevity. The compact size makes them easy to store and transport.

There is virtually no learning curve associated with these weights. Simply screw them into the back of the arrow and you are ready to shoot. Even novice archers will find them easy to use and understand.

Durability & Maintenance

The Victory Screw in Back Weights .245 Dia. 20 gr. 12 pk. are built to last. The high-quality metal alloy is resistant to wear and corrosion, ensuring years of reliable performance. They have shown no signs of wear and tear even after hundreds of shots.

Maintenance is minimal. Simply wipe them down with a clean cloth periodically to remove any dirt or debris. Check the threads to ensure they remain clean and undamaged. Basic maintenance will ensure longevity.

The simplicity of the design also contributes to their durability. There are no moving parts or complex mechanisms to fail. The screw-in design is robust and reliable.

Accessories and Customization Options

The Victory Screw in Back Weights .245 Dia. 20 gr. 12 pk. themselves are accessories designed to enhance arrow performance. They do not require any additional accessories or modifications. However, they can be used in conjunction with other arrow tuning components.

For example, archers can experiment with different point weights to further fine-tune arrow balance. They can also use different fletching configurations to optimize arrow flight for specific shooting conditions. These weights are compatible with standard archery accessories.

It is important to note that the Victory weights are specifically designed for use with Victory VForce and VForce TKO arrow shafts. While they may fit other arrow shafts with a .245-inch inner diameter, compatibility is not guaranteed. It is always best to use them with the intended arrow shafts.

Pros and Cons of Victory Screw in Back Weights .245 Dia. 20 gr. 12 pk.

Check Best Price HERE

Who Should Buy Victory Screw in Back Weights .245 Dia. 20 gr. 12 pk.?

The Victory Screw in Back Weights .245 Dia. 20 gr. 12 pk. are perfect for archers who want to fine-tune their arrow balance and improve accuracy. They are particularly beneficial for hunters and competitive shooters who demand consistent performance in various shooting conditions. These weights offer great incremental adjustments.

These weights are also a great option for archers who use Victory VForce and VForce TKO arrow shafts. The .245-inch diameter ensures a snug and secure fit. They are also good for archers looking to improve their shot.

Archers seeking drastic changes in arrow balance may want to skip this product. The 20-grain increment may not be sufficient for their needs. They may want to look at additional weighting systems.

A must-have accessory is a good arrow puller. Removing arrows from targets can be difficult, especially with the added weight at the rear. An arrow puller will make the process much easier. It can also be easy to lose the back weights so keeping spares can be helpful.

Conclusion on Victory Screw in Back Weights .245 Dia. 20 gr. 12 pk.

In summary, the Victory Screw in Back Weights .245 Dia. 20 gr. 12 pk. are a simple, yet effective solution for optimizing arrow flight. They are easy to install, durable, and provide measurable improvements in accuracy and stability. For only $6.99 they make a great cost effective modification.

The price is definitely justified. These weights offer a significant performance boost without breaking the bank. I would personally recommend them to any archer looking to fine-tune their setup and improve their shooting.

If you are serious about archery and want to take your shooting to the next level, the Victory Screw in Back Weights .245 Dia. 20 gr. 12 pk. are a must-have. They offer a quick, easy, and affordable way to optimize arrow flight and achieve greater accuracy. Invest in your archery setup today and experience the difference!

Check Best Price HERE