The Victory Screw in Back Weights .245 Dia. 10 gr. 12 pk. Made a Bold First Impression
As an archery enthusiast with over a decade of experience tinkering with setups, I’m always on the lookout for marginal gains. The quest for the perfect arrow flight and optimal FOC (Front of Center) has led me down many rabbit holes, and the Victory Screw in Back Weights .245 Dia. 10 gr. 12 pk. promised an easy, affordable way to fine-tune my arrows. I was skeptical, yet intrigued.
My main problem was achieving optimal arrow flight with broadheads. I’d spent hours paper tuning and walk-back tuning, only to find inconsistencies at longer distances. I needed a way to subtly adjust my arrow balance without completely rebuilding my arrow setup.
Upon receiving the package, I was immediately impressed by the simplicity. Twelve small, precisely machined weights, ready to screw in. The build quality seemed solid for such a small and inexpensive item. These are manufactured by Victory Archery.
I considered other options like adding weight to the front of my arrows with heavier points, but that would require replacing all my inserts. This also means re-tuning my bow which takes hours. Back weights seemed like a less drastic, more easily reversible change. I was also looking at using weight tubes inside the arrow shaft, but these were going to be a pain to install and remove.
My initial excitement was tempered by a slight concern about whether these tiny weights would actually make a noticeable difference. I knew I’d have to put them to the test to truly see their value. I felt cautiously optimistic, hoping these Victory Screw in Back Weights .245 Dia. 10 gr. 12 pk. would be the missing piece of my archery puzzle.
Real-World Testing: Putting Victory Screw in Back Weights .245 Dia. 10 gr. 12 pk. to the Test
First Use Experience
My first experience using the Victory Screw in Back Weights .245 Dia. 10 gr. 12 pk. was at my local outdoor archery range. The weather was slightly breezy, but otherwise perfect for shooting. I was shooting at targets ranging from 20 to 60 yards.
Installing the weights was incredibly simple. I just screwed them into the back of my Victory VForce arrows. No special tools were required. I immediately noticed a slight change in how the arrow felt during the draw. I had never used weights on the back of the arrow before.
After a few initial shots, I started seeing a noticeable improvement in my arrow grouping at 40 and 50 yards. Previously, my arrows would occasionally fishtail or veer slightly off course, especially in the wind. With the added back weight, they seemed to stabilize much faster and fly straighter.
Extended Use & Reliability
After several weeks of consistent use, including multiple practice sessions and a weekend hunting trip (unsuccessful harvest, unfortunately!), the Victory Screw in Back Weights .245 Dia. 10 gr. 12 pk. have held up remarkably well. There have been no signs of loosening or damage. They remain securely attached even after repeated impacts into a dense target.
The weights are easy to remove and reinstall as needed. This makes fine-tuning my arrow flight for different distances or broadheads a breeze. Cleaning is straightforward; a quick wipe with a cloth is all it takes to remove any dirt or debris.
Compared to my previous experiences of trying to optimize arrow flight, these back weights have been a game-changer. They offer a level of adjustability that I simply couldn’t achieve before without investing in expensive new components. They’ve definitely exceeded my expectations.
Breaking Down the Features of Victory Screw in Back Weights .245 Dia. 10 gr. 12 pk.
Specifications
- Diameter: .245 inches. This is crucial for ensuring a proper fit with compatible arrow shafts.
- Weight: 10 grains each. This weight is enough to make a noticeable impact on arrow FOC without being excessive.
- Quantity: 12 per pack. Provides ample opportunity for experimentation and fine-tuning multiple arrows.
- Compatibility: Designed for Victory VForce and VForce TKO shafts. Guarantees a secure and flush fit.
- Material: (Assumed to be) Machined metal, likely brass or steel. Provides durability and consistent weight.
These specifications are vital because they dictate the effectiveness of the weights. The .245 diameter ensures a snug fit, preventing wobble or vibration. The 10-grain weight offers a subtle but effective adjustment to arrow balance.
Performance & Functionality
The Victory Screw in Back Weights .245 Dia. 10 gr. 12 pk. perform their job admirably. They allow for precise adjustment of arrow FOC, leading to improved arrow flight and tighter groupings.
Their biggest strength is the ease of use. They are incredibly simple to install and remove, allowing for quick adjustments in the field. The only weakness I’ve found is that they are only compatible with specific arrow shafts.
These weights have exceeded my expectations. They’ve provided a tangible improvement to my shooting accuracy and consistency.
Design & Ergonomics
The design is simple yet effective. The weights are small and unobtrusive, adding minimal bulk to the arrow. They are easy to handle and screw in securely.
They are very user-friendly. There’s virtually no learning curve; anyone can use them.
Durability & Maintenance
The weights appear to be quite durable. They have withstood numerous impacts without showing signs of damage.
Maintenance is minimal. A simple cleaning is all that’s required to keep them in good condition.
Accessories and Customization Options
The Victory Screw in Back Weights .245 Dia. 10 gr. 12 pk. don’t come with any additional accessories, as they are a self-contained product. They are designed to complement existing arrow setups.
They are compatible with a variety of arrow wraps and fletchings, allowing for further customization. You could also experiment with different combinations of front and back weights for truly customized arrow flight.
Pros and Cons of Victory Screw in Back Weights .245 Dia. 10 gr. 12 pk.
Pros
- Inexpensive way to fine-tune arrow FOC.
- Easy to install and remove.
- Noticeable improvement in arrow flight and grouping.
- Durable and long-lasting.
- Allows for greater customization of arrow setup.
Cons
- Only compatible with Victory VForce and VForce TKO shafts.
- 10-grain weight might not be enough for archers seeking drastic FOC changes.
Who Should Buy Victory Screw in Back Weights .245 Dia. 10 gr. 12 pk.?
The Victory Screw in Back Weights .245 Dia. 10 gr. 12 pk. are perfect for archers who:
- Shoot Victory VForce or VForce TKO arrows.
- Want to fine-tune their arrow FOC for improved flight.
- Are experiencing issues with arrow grouping or stabilization.
- Prefer a simple and inexpensive solution to arrow tuning.
This product might not be suitable for archers who:
- Use arrow shafts from other manufacturers.
- Are looking for a drastic change in arrow FOC.
- Prefer to rely solely on front-of-center weighting solutions.
A must-have accessory to go with these weights would be a reliable arrow scale for accurately measuring arrow weight and FOC after installation.
Conclusion on Victory Screw in Back Weights .245 Dia. 10 gr. 12 pk.
The Victory Screw in Back Weights .245 Dia. 10 gr. 12 pk. are a surprisingly effective and affordable tool for any archer looking to optimize their arrow flight. At just $6.99, they represent an incredible value proposition.
These weights offer a simple yet powerful way to fine-tune arrow FOC and improve shooting accuracy. I personally recommend them to anyone shooting Victory VForce or VForce TKO arrows.
If you’re looking to take your archery game to the next level, don’t overlook these small but mighty weights. Give them a try, and you might be amazed at the difference they can make. Get yours today and experience the difference firsthand!