SLIP 2000 Carbon Killer 4 oz Squeeze Bottle Review

The SLIP 2000 Carbon Killer 4 oz Squeeze Bottle Made a Bold First Impression

The SLIP 2000 Carbon Killer 4 oz Squeeze Bottle arrived promising to be a heavy-hitter in the carbon-cleaning arena. SLIP 2000 is a name I’ve trusted for years with their line of lubricants and protectants, so I was eager to see if their carbon cleaner held the same standard. My well-worn AR-15, a veteran of countless range days and a few dusty hog hunts, presented the perfect testing ground for this claim.

For years, I’ve relied on a mix of solvents, brushes, and elbow grease to tackle baked-on carbon. Some cleaners worked decently, but the process was always tedious and time-consuming, leaving me wanting a more effective and efficient solution. When I saw the SLIP 2000 Carbon Killer touted as dissolving carbon on contact, I was immediately intrigued, hoping to finally find a true “one-stop” carbon eliminator.

The small 4 oz squeeze bottle felt sturdy enough in my hands. The labeling was straightforward, clearly warning about its aggressive nature and intended use for soaking internal parts only; a warning I certainly heeded. Compared to other carbon cleaners I’ve used, like Bore Tech Carbon Remover or Hoppe’s No. 9, the SLIP 2000 Carbon Killer immediately stood out with its clear, almost water-like consistency, unlike the thicker, more viscous nature of its competitors.

My initial reaction was cautiously optimistic. The warnings about potential finish damage gave me pause, but the promise of effortless carbon removal was too tempting to resist. The small bottle size seemed limiting, but I was hopeful a little would go a long way.

Real-World Testing: Putting SLIP 2000 Carbon Killer 4 oz Squeeze Bottle to the Test

First Use Experience

I subjected the SLIP 2000 Carbon Killer to its first trial after a particularly grueling range session with my AR-15. The bolt carrier group was caked in carbon, especially around the gas rings and bolt face. Instead of spraying the cleaner directly, as I typically do, I followed the instructions explicitly and placed the parts in a small plastic container filled with enough Carbon Killer to submerge them.

After soaking for approximately 15 minutes, I removed the parts and was immediately impressed. Much of the carbon simply wiped away with a cloth; the stubborn remnants succumbed to a nylon brush with minimal effort. I noticed the liquid had taken on a noticeably darker color, further confirming its effectiveness.

Extended Use & Reliability

Over the past few months, the SLIP 2000 Carbon Killer has become a staple in my cleaning routine after every range trip. It’s particularly effective on heavily fouled AR-15 bolts and gas pistons. I’ve also used it on my suppressed .22LR pistol, which tends to get incredibly dirty, and it performed flawlessly.

The Carbon Killer shows no signs of losing its potency after repeated uses. I decant into a smaller container for soaking and then dispose of the used cleaner responsibly, wearing gloves and eye protection. While I haven’t noticed any wear and tear on the parts themselves, the strong nature of this solvent must be respected.

Breaking Down the Features of SLIP 2000 Carbon Killer 4 oz Squeeze Bottle

Specifications

• Product Name: SLIP 2000 Carbon Killer 4 oz Squeeze Bottle.
• Intended Use: For soaking metal gun parts with baked-on carbon. The Carbon Killer is specifically designed for cleaning bores and internal metal gun parts.
• Aggressiveness: An aggressive cleaner that should not be used to clean the outside of your gun. It may damage or remove some finishes.
• Size: 4 oz squeeze bottle. This small size makes it ideal for targeted cleaning.
• Composition: Dissolves carbon and lead on contact. This is key to its efficient cleaning action.

These specifications are crucial because they highlight the Carbon Killer’s specialized role: aggressive deep cleaning of internal metal parts. Understanding its potential to damage finishes is vital for responsible use.

Performance & Functionality

The SLIP 2000 Carbon Killer performs exceptionally well at its intended task: dissolving baked-on carbon. Its ability to loosen and remove carbon with minimal scrubbing is impressive. The solvent significantly reduces cleaning time and effort.

Its main strength is its rapid carbon-dissolving action; its primary weakness is its potential to damage finishes if misused. It definitely meets my expectations, offering a level of cleaning power I hadn’t found in other solvents.

Design & Ergonomics

The 4 oz squeeze bottle is functional, albeit somewhat basic. The small size is manageable and allows for controlled dispensing. The bottle’s simple design is adequate for its purpose.

The product itself is easy to use; simply soak the parts and then clean them. The aggressive nature of the cleaner does require caution and adherence to the manufacturer’s instructions.

Durability & Maintenance

The SLIP 2000 Carbon Killer itself doesn’t degrade or require maintenance. The solvent will likely last a considerable time if the bottle is sealed after use. Always dispose of it properly and responsibly.

The product’s long shelf life and the minimal amount needed per cleaning make it a durable solution in terms of value for money. Always use appropriate personal protective equipment (PPE) when using this product.

Accessories and Customization Options

The SLIP 2000 Carbon Killer doesn’t require any specific accessories, though I highly recommend using nitrile gloves and eye protection when handling it. A small parts soaking container and various nylon brushes are also beneficial.

The cleaner isn’t directly customizable; however, its effectiveness can be enhanced by using it in conjunction with ultrasonic cleaners for particularly stubborn carbon buildup. Just ensure your ultrasonic cleaner is compatible with solvents!

Pros and Cons of SLIP 2000 Carbon Killer 4 oz Squeeze Bottle