SLIP 2000 725 Foaming Bore Cleaner 12 oz Foam Review

The SLIP 2000 725 Foaming Bore Cleaner 12 oz Foam Made a Bold First Impression

The SLIP 2000 725 Foaming Bore Cleaner 12 oz Foam promises a deep clean for firearms, tackling tough carbon buildup and stubborn grime. As a seasoned outdoor and tactical gear specialist, I’ve seen countless bore cleaners come and go, each claiming to be the ultimate solution for firearm maintenance. I was intrigued by SLIP 2000‘s reputation for producing effective cleaning products, so I decided to put their foaming bore cleaner to the test.

My biggest frustration has always been the tedious nature of cleaning heavily used firearms. I needed a bore cleaner that could effectively remove stubborn carbon fouling without excessive scrubbing or soaking. Upon receiving the SLIP 2000 725 Foaming Bore Cleaner 12 oz Foam, I immediately noticed the sturdy can and the clear, concise labeling. The weight felt appropriate, suggesting a decent amount of product within.

I’ve used bore cleaners from Hoppe’s No. 9 and CLP Break-Free in the past. While both are decent, I find Hoppe’s No. 9 lacking in cutting through heavy carbon deposits and CLP Break-Free is better as a lubricant. I chose the SLIP 2000 725 Foaming Bore Cleaner 12 oz Foam hoping for a more powerful and effective carbon removing experience. My first impression was one of cautious optimism; I was eager to see if it lived up to the claims of cutting through tough grime.

Real-World Testing: Putting SLIP 2000 725 Foaming Bore Cleaner 12 oz Foam to the Test

First Use Experience

I first tested the SLIP 2000 725 Foaming Bore Cleaner 12 oz Foam on my AR-15 after a day at the range, putting about 300 rounds through it. The conditions were fairly dry and warm, resulting in typical carbon fouling. Application was simple: I sprayed the foam into the bore from the chamber end, as instructed, and let it sit for about 15 minutes.

I was pleasantly surprised by how easily the carbon loosened after the soak. The foam seemed to penetrate and lift the fouling effectively. One minor issue I noticed was a slight chemical odor, but it wasn’t overpowering or unpleasant.

Extended Use & Reliability

After several weeks of using the SLIP 2000 725 Foaming Bore Cleaner 12 oz Foam on various firearms, including shotguns and pistols, I’m impressed with its consistency. It consistently outperforms other cleaners I’ve used in the past, especially when dealing with stubborn carbon buildup. There are no signs of the cleaner damaging any of the firearm’s components or finish.

The SLIP 2000 725 Foaming Bore Cleaner 12 oz Foam is easy to maintain; simply wipe away any excess after cleaning. Compared to my previous experiences with other cleaners, the SLIP 2000 product significantly reduces cleaning time and effort. It has become my go-to bore cleaner for all my firearms.

Breaking Down the Features of SLIP 2000 725 Foaming Bore Cleaner 12 oz Foam

Specifications

• The SLIP 2000 725 Foaming Bore Cleaner 12 oz Foam comes in a 12 oz aerosol can. This is a standard size for most foaming bore cleaners.

• It is designed to cut through tough cosmoline, carbon, grease, and grime. The formulation aims for deep cleaning capability.

• It is suitable for use on all types of firearms. It can be used safely on various metal and polymer surfaces.

• The cleaner can be sprayed on parts or used in parts washers or solvent tanks. This provides versatility in application.

These specifications are essential because they directly impact the cleaner’s effectiveness, ease of use, and safety. A powerful cleaner that is safe for all firearm materials is vital.

Performance & Functionality

The SLIP 2000 725 Foaming Bore Cleaner 12 oz Foam excels at its primary job: removing stubborn fouling. The foam penetrates deep into the bore, loosening carbon deposits and making them easy to remove with a brush or patch. While incredibly effective, it would be even better if it included a built-in rust inhibitor.

The cleaner’s strengths lie in its powerful cleaning action and ease of use, with the only weakness being a slightly noticeable chemical odor. It definitely meets and even exceeds expectations when compared to other bore cleaners on the market.

Design & Ergonomics

The aerosol can design is functional and easy to use. The nozzle sprays a consistent and even layer of foam. The 12 oz size is manageable and not too bulky.

The cleaner is very user-friendly, with a simple spray-and-wait application process. There’s virtually no learning curve involved.

Durability & Maintenance

The lifespan of the SLIP 2000 725 Foaming Bore Cleaner 12 oz Foam depends on usage frequency, but the can provides plenty of cleaner for multiple firearms cleanings. It should last a significant amount of time. The product itself does not require any maintenance; it is a consumable item.

Accessories and Customization Options

The SLIP 2000 725 Foaming Bore Cleaner 12 oz Foam doesn’t come with any included accessories. However, it’s compatible with standard bore brushes, jags, and cleaning patches. There are no real customization options, as it is a standalone cleaning product.

Pros and Cons of SLIP 2000 725 Foaming Bore Cleaner 12 oz Foam