Rexpid III Broadheads 125 gr. 3 pk. Review

The Rexpid III Broadheads 125 gr. 3 pk. Made a Bold First Impression

Mechanical broadheads always intrigued me, but I’ve been burned before by unreliable deployment and flimsy construction. So, when I saw the Rexpid III Broadheads 125 gr. 3 pk., boasting an internal gear mechanism and no reliance on O-rings, I was cautiously optimistic. Could this be the mechanical broadhead that finally delivers on its promise?

I needed a broadhead I could trust for an upcoming whitetail hunt in dense woods, where shot opportunities can be fleeting and require pinpoint accuracy. I was tired of worrying about whether my broadhead would open properly upon impact. This problem prompted me to look for a more reliable alternative.

Unboxing the Rexpid III Broadheads 125 gr. 3 pk. was a pleasant surprise. The construction felt solid, the blades were impressively sharp, and the gear mechanism moved smoothly. The heads had a noticeable heft, suggesting durable construction, but not excessively so.

I considered the Rage Hypodermic and the Grim Reaper Whitetail Special before settling on the Rexpid III Broadheads 125 gr. 3 pk. I chose the Rexpid III Broadheads 125 gr. 3 pk. because its internal gear system promised a more dependable deployment than the friction-based systems of the Rage and the spring-loaded mechanism of the Grim Reaper. I was betting on the gear system to ensure blades open simultaneously.

My initial impression was excitement tempered with a healthy dose of skepticism. The design was promising, but the proof would be in the performance. I was eager to get them out to the range and see how they flew.

Real-World Testing: Putting Rexpid III Broadheads 125 gr. 3 pk. to the Test

First Use Experience

My first test of the Rexpid III Broadheads 125 gr. 3 pk. was at my local archery range, shooting into a layered foam target at distances ranging from 20 to 50 yards. I wanted to get a feel for their flight characteristics and ensure they were grouping consistently with my field points. The weather was mild and dry, providing ideal testing conditions.

The Rexpid III Broadheads 125 gr. 3 pk. flew surprisingly well, grouping within an inch or two of my field points out to 40 yards. I did need to make a small adjustment to my sight. Blade deployment was consistent upon impact with the target.

Initially, I experienced some difficulty inserting the broadheads into my quiver, because of the large cutting diameter. The fit was snug, but with a little practice, I was able to manage it without issue. After the first few shots, I noticed some slight deformation of the foam target due to the blades’ aggressive cutting action.

Extended Use & Reliability

After several weeks of consistent practice and fine-tuning, the Rexpid III Broadheads 125 gr. 3 pk. have proven to be impressively reliable. I have shot dozens of arrows with these broadheads, and they continue to fly true and deploy consistently. There is minimal sign of wear and tear on the blades or the internal mechanism.

The only maintenance I’ve performed is wiping the blades clean after each use and occasionally applying a thin coat of oil to the pivot points. They have held up well against the dense foam of my target, and the blades remain remarkably sharp. Compared to other mechanical broadheads I’ve used, the Rexpid III Broadheads 125 gr. 3 pk. have demonstrated superior durability and consistency.

These broadheads outperformed some of my earlier experiences. I used to use fixed blade broadheads that needed frequent sharpening.

Breaking Down the Features of Rexpid III Broadheads 125 gr. 3 pk.

Specifications

• Weight: 125 grains. This is a common weight, suitable for a wide range of bow setups and arrow spines.
• Cutting Diameter: 1 9/16”. The large cutting diameter promises significant tissue damage and a quick, ethical kill.
• Blade Thickness: .028”. The blade thickness seems adequate for durability, and may not be optimal for bone penetration.
• Mechanism: Internal gear system. The internal gear is the key differentiator, intended to ensure synchronized blade deployment.
• Blade Retention: Blades remain closed without O-rings or rubber bands. This reduces the chances of pre-deployment and increases reliability in various weather conditions.

The 125-grain weight is ideal for achieving a good front-of-center (FOC) balance on your arrow, which enhances accuracy and penetration. The large cutting diameter creates a massive wound channel. The absence of O-rings means that the blades will not be compromised during cold temperatures.

Performance & Functionality

The Rexpid III Broadheads 125 gr. 3 pk. excel in creating large and devastating wound channels. The blades are consistently deployed upon impact, resulting in quick and ethical kills. In terms of accuracy, these broadheads fly remarkably similar to field points, minimizing the need for significant sight adjustments.

The internal gear mechanism is the standout feature, providing reliable and simultaneous blade deployment. One potential weakness is that the .028″ blade thickness might be a limiting factor. These heads will likely require good shot placement. These heads have certainly met my expectations.

Design & Ergonomics

The Rexpid III Broadheads 125 gr. 3 pk. are constructed from high-quality materials, which feels solid and well-made. The weight is well-balanced, contributing to stable arrow flight. The streamlined design minimizes wind resistance and maximizes penetration.

The broadheads are easy to install on arrow shafts, and the blades lock securely in place. The absence of O-rings or rubber bands simplifies the setup process and reduces the risk of failure in the field. The learning curve is minimal.

Durability & Maintenance

The Rexpid III Broadheads 125 gr. 3 pk. appear to be built to last, with durable blades and a robust internal mechanism. With proper care and maintenance, these broadheads should withstand repeated use and maintain their performance over time. Cleaning is simple, requiring only a quick wipe down after each use.

Minimal maintenance is required for these broadheads. Occasional sharpening is suggested to improve cutting performance.

Accessories and Customization Options

The Rexpid III Broadheads 125 gr. 3 pk. do not come with any additional accessories. No customization options are available. The broadheads are compatible with standard arrow inserts and can be used with a variety of arrow shafts.

These broadheads are designed to work with standard arrow components. Third party accessories can likely be used with these heads.

Pros and Cons of Rexpid III Broadheads 125 gr. 3 pk.

Check Best Price HERE

Who Should Buy Rexpid III Broadheads 125 gr. 3 pk.?

• Perfect for: Hunters seeking a reliable and accurate mechanical broadhead with a large cutting diameter for quick, ethical kills on deer-sized game.
• Who should skip this product? Hunters who frequently encounter bone impacts or prefer fixed-blade broadheads for maximum penetration.
• Must-have accessories or modifications? A high-quality arrow puller may be beneficial for removing arrows from dense targets.

Conclusion on Rexpid III Broadheads 125 gr. 3 pk.

The Rexpid III Broadheads 125 gr. 3 pk. offer a compelling combination of accuracy, reliability, and cutting power. The internal gear mechanism sets them apart from other mechanical broadheads, providing consistent and dependable blade deployment. At $18.99 for a 3-pack, the price is more than justified by the performance and quality.

I would absolutely recommend the Rexpid III Broadheads 125 gr. 3 pk. to any hunter looking for a mechanical broadhead. The accuracy, reliability, and impressive cutting diameter make them a valuable addition to any archery setup. It’s time to ditch those unreliable broadheads and experience the confidence that comes with knowing your equipment will perform when it matters most. Go ahead and give them a try.

Check Best Price HERE