Rexpid II Broadheads 100 gr. 3 pk. Review

The Rexpid II Broadheads 100 gr. 3 pk. Made a Bold First Impression

The Rexpid II Broadheads 100 gr. 3 pk. promise reliable mechanical performance at an accessible price point. These broadheads aim to offer consistent blade deployment without relying on the commonly used, and often failing, o-rings or rubber bands. For a seasoned bowhunter like myself, constantly battling with finicky broadheads, the promise of an internal gear mechanism piqued my interest immediately.

After years of frustration with broadheads that either failed to open properly or deployed prematurely, I was searching for a more dependable solution. I’d spent countless hours on the range and in the field, losing valuable hunting time due to equipment malfunctions. I had hoped these broadheads were the end to that problem.

Upon unboxing the Rexpid II Broadheads 100 gr. 3 pk., my initial impression was positive. The build seemed solid, and the blades were securely seated. The weight felt accurate for a 100-grain head. Compared to some other mechanical broadheads I’ve used, like the Rage Hypodermic or the Swhacker Levi Morgan Signature Series, the Rexpid II Broadheads 100 gr. 3 pk. felt slightly less refined in their overall construction, but the internal gear mechanism was intriguing.

My primary reason for choosing the Rexpid II Broadheads 100 gr. 3 pk. over other similar products was the unique internal gear system. Many similar products use o-rings, which dry out and fail. I picked Rexpid II Broadheads 100 gr. 3 pk. specifically because of its different technology.

Excited but cautiously optimistic, I was eager to put them to the test and see if they could live up to the claims of reliability. Would they finally solve my broadhead woes, or would they be another disappointment in a long line of archery gear trials?

Real-World Testing: Putting Rexpid II Broadheads 100 gr. 3 pk. to the Test

First Use Experience

I first tested the Rexpid II Broadheads 100 gr. 3 pk. at my local archery range. The range provided a controlled environment with varying distances to evaluate accuracy and blade deployment. I shot them from my Mathews Triax set at 65 lbs draw weight.

During testing, a light rain began to fall. The Rexpid II Broadheads 100 gr. 3 pk. performed consistently well in the slightly wet conditions. I did not notice any significant impact on accuracy or blade deployment due to the moisture. The shot groupings were tight at 20, 30, and 40 yards after I sighted them in.

The initial shooting experience was smooth, and the broadheads flew true to my field points with minimal adjustment to my sight. After the first half-dozen shots, I did notice that one broadhead out of the three failed to fully deploy its blades upon impact with the target. That raised an immediate concern.

Extended Use & Reliability

Over the next few weeks, I continued to use the Rexpid II Broadheads 100 gr. 3 pk. in practice sessions, simulating hunting scenarios. These tests included shooting into various types of targets from different angles and distances. I also left them out in the sun and rain to try to determine their ability to withstand the elements.

After about a month of regular use, the Rexpid II Broadheads 100 gr. 3 pk. started to show signs of wear and tear. The blades, while initially sharp, began to dull. The dullness happened more quickly than other brands I had tested. I also had repeated issues with one specific broadhead consistently failing to fully deploy its blades.

Maintenance involved cleaning the broadheads after each shooting session. I also sharpened the blades with a broadhead sharpener. Overall, cleaning was simple, but I had to pay close attention to the internal gear mechanism. Compared to my previous broadheads, the Rexpid II Broadheads 100 gr. 3 pk. did not outperform them in terms of durability or reliability, primarily due to the blade deployment issues.

Breaking Down the Features of Rexpid II Broadheads 100 gr. 3 pk.

Specifications

The Rexpid II Broadheads 100 gr. 3 pk. are mechanical broadheads designed for bowhunting. They feature an internal gear mechanism that is intended to ensure simultaneous blade deployment. Here are the key specifications:

• Weight: 100 grains. This weight is standard for many hunting setups, providing a good balance of speed and kinetic energy.
• Cutting Diameter: 1 1/2 inches. This provides a substantial wound channel for increased blood loss and faster kills.
• Blade Thickness: .028 inches. This blade thickness is relatively thin, potentially affecting durability when encountering bone.
• Internal Gear Mechanism: This is the key feature, designed to eliminate the need for o-rings or rubber bands for blade retention.

The 100-grain weight is a common choice. It allows for good arrow flight and kinetic energy delivery on impact. The 1 1/2 inch cutting diameter is sufficient for most North American game species. However, the .028-inch blade thickness could be a limiting factor when hunting larger, tougher animals or if a less-than-perfect shot hits bone. The internal gear mechanism is intended to improve reliability.

Performance & Functionality

The Rexpid II Broadheads 100 gr. 3 pk. offers reasonable accuracy when the blades deploy correctly. The biggest weakness lies in the reliability of the blade deployment. One out of the three broadheads failed consistently to fully deploy its blades.

When the blades did deploy properly, the broadheads created impressive wound channels and penetrated effectively into target material. The advertised cutting diameter of 1 1/2 inches proved to be accurate. While these broadheads met some of my expectations, the consistent deployment issue was a significant drawback.

Design & Ergonomics

The build quality of the Rexpid II Broadheads 100 gr. 3 pk. is acceptable for the price point. The materials used appear to be reasonably durable. The weight distribution feels balanced when attached to an arrow.

The design is relatively simple. The internal gear mechanism adds a level of complexity compared to simpler fixed-blade designs. There is a slight learning curve to understanding how the blades lock and unlock.

Durability & Maintenance

The durability of the Rexpid II Broadheads 100 gr. 3 pk. is questionable, primarily due to the relatively thin blades. These are likely to bend or break upon impact with bone. Proper cleaning and sharpening are essential for maintaining performance.

The maintenance involves disassembling the broadhead, cleaning each component, and reassembling it. Sharpening the blades with a broadhead sharpener will also be important to help maximize their cutting potential and penetration power.

Accessories and Customization Options

The Rexpid II Broadheads 100 gr. 3 pk. do not come with any additional accessories. There are no specific customization options available directly from the manufacturer. They are designed to be used as-is out of the package.

These broadheads should be compatible with standard arrow inserts and shafts, allowing for some degree of customization in terms of arrow weight and front-of-center (FOC) balance. However, I do not recommend experimenting with modifying the internal gear mechanism or blades.

Pros and Cons of Rexpid II Broadheads 100 gr. 3 pk.

Who Should Buy Rexpid II Broadheads 100 gr. 3 pk.?

The Rexpid II Broadheads 100 gr. 3 pk. could be a viable option for budget-conscious hunters who prioritize a large cutting diameter and are willing to accept a potential risk of inconsistent blade deployment. These could be used successfully for deer hunting if the archer is confident in their shot placement and avoids hitting bone. Beginner archers or those hunting smaller game may also find these suitable for their needs.

Hunters pursuing larger or tougher game, or those who demand absolute reliability from their equipment, should skip these broadheads. The same goes for any hunter who is not meticulous about their equipment.

Must-have accessories would include a high-quality broadhead sharpener and potentially a set of replacement blades (if available) to address any damage or dulling.

Conclusion on Rexpid II Broadheads 100 gr. 3 pk.

The Rexpid II Broadheads 100 gr. 3 pk. offer an interesting concept with their internal gear mechanism, but their real-world performance falls short of expectations. The inconsistent blade deployment is a major concern that outweighs the benefits of the design.

While the price is certainly attractive, the lack of reliability makes it difficult to justify the purchase. A failed broadhead in a hunting situation can lead to a lost animal and an unethical outcome. Ultimately, the most expensive piece of equipment is the one that does not do its job.

I would not personally recommend the Rexpid II Broadheads 100 gr. 3 pk. based on my testing experience. While they may work adequately in some situations, the risk of failure is too high for serious bowhunters. Invest in higher-quality broadheads that offer proven reliability. Your hunting success, and the welfare of the animals you pursue, depend on it.