XTS Echo Micro Holographic 3 MOA Dot Sight Review

Table of Contents

First Impressions of XTS Echo Micro Holographic 3 MOA Dot Sight

The XTS Echo Micro Holographic 3 MOA Dot Sight promises to be a compact and versatile optic for a variety of popular pistols. Marketed by XTS as a micro-sized red dot, it boasts features like a 3 MOA dot, multiple color options, and compatibility with the RMSc footprint. My interest was piqued by its potential to enhance the accuracy and speed of target acquisition on my everyday carry pistol.

I needed a compact optic that wouldn’t add significant bulk to my concealed carry setup. I was hoping for a sight that would be easy to install, zero, and use in a variety of lighting conditions, offering a clear and precise aiming point. Upon unboxing, the sight felt surprisingly lightweight, and the finish appeared durable.

I considered the Holosun 407K and the Shield RMSx, both popular options in the micro red dot category. I opted for the XTS Echo Micro Holographic 3 MOA Dot Sight due to its lower price point, intrigued by the promise of similar performance at a more accessible cost. My initial impression was cautiously optimistic. I was eager to see if it could live up to the hype, especially given the mixed user reviews regarding its “holographic” claim.

Check Best Price HERE

See on GunMagWarehouse

Real-World Testing: Putting XTS Echo Micro Holographic 3 MOA Dot Sight to the Test

First Use Experience

My initial testing took place at an indoor shooting range. I mounted the XTS Echo Micro Holographic 3 MOA Dot Sight on my Springfield Hellcat, one of the pistols listed as compatible. The sight performed reasonably well during the initial range session.

I experienced no issues with target acquisition in the controlled lighting of the indoor range. The dot was crisp and easy to see. However, the true test would come with extended use and varied conditions.

Extended Use & Reliability

After several weeks of consistent use, including approximately 500 rounds fired, some concerns arose. While the sight held zero adequately, the battery life was noticeably shorter than expected. Furthermore, I observed some wear and tear on the housing.

The finish showed some minor scratches, and the button for brightness adjustment felt slightly less responsive. Compared to my experience with a Trijicon RMR, the XTS Echo Micro Holographic 3 MOA Dot Sight falls short in terms of overall durability. However, considering the price difference, it is an understandable compromise.

Breaking Down the Features of XTS Echo Micro Holographic 3 MOA Dot Sight

Specifications

The XTS Echo Micro Holographic 3 MOA Dot Sight offers a specific set of features. It utilizes a 3 MOA dot for aiming and is designed to fit pistols with an RMSc footprint like the Springfield Armory Hellcat, SCCY CPX, and SIG Sauer P365. It is important to understand them in detail.

Manufacturer: XTS
Color: Black
Reticle: 3 MOA
Illumination Type: Holographic (Note: This is debated, as many users claim it is a standard red dot)
Illumination Color: Red
Emitter Type: Enclosed
Battery Type: Stand Alone Lithium
Gun Model: Springfield Armory Hellcat, SCCY CPX, SIG Sauer P365
Red Dot Sights-Footprint: RMSc

These specifications mean it is compact, lightweight, and compatible with popular concealed carry pistols. However, the “holographic” designation is misleading, as it functions more like a traditional red dot sight.

Performance & Functionality

The sight performs its primary job of providing a red dot for aiming. The 3 MOA dot is suitable for both close-quarters and mid-range engagements. There are some issues that do need to be understood.

Accuracy is adequate for its intended purpose, allowing for reasonably tight groupings at typical pistol ranges. The button-activated brightness adjustment is a welcome feature, but the range of brightness levels could be wider to better accommodate very bright or very dark environments.

Design & Ergonomics

The XTS Echo Micro Holographic 3 MOA Dot Sight features a compact and lightweight design. This is crucial for maintaining a comfortable and concealable carry setup. The build quality is acceptable for the price.

While the materials don’t feel as robust as higher-end optics, they are sufficient for typical use. The RMSc footprint makes it compatible with a wide range of pistols, but the slightly wider screw heads can pose an installation challenge, as some users have noted.

Durability & Maintenance

Based on my experience, the long-term durability of the XTS Echo Micro Holographic 3 MOA Dot Sight is a potential concern. While it has held up so far, I noticed some wear and tear after only a few weeks of use. Cleaning the lens is straightforward, but the battery compartment can be a bit fiddly to access.

Accessories and Customization Options

The XTS Echo Micro Holographic 3 MOA Dot Sight comes with a CR2032 battery. This is a common battery type. There are no other included accessories. As for customization, the sight’s RMSc footprint allows for compatibility with a variety of aftermarket mounting plates.

Pros and Cons of XTS Echo Micro Holographic 3 MOA Dot Sight

Pros

Affordable price point makes it accessible for budget-conscious shooters.
Compact and lightweight design is ideal for concealed carry pistols.
RMSc footprint ensures broad compatibility with a range of firearms.
Easy to install and zero for users with basic gunsmithing skills.
3 MOA dot provides a clear aiming point for various shooting scenarios.

Cons

Misleading “holographic” designation, as it functions as a standard red dot.
Questionable long-term durability compared to higher-end optics.
Limited brightness adjustment range may struggle in extreme lighting conditions.

Who Should Buy XTS Echo Micro Holographic 3 MOA Dot Sight?

The XTS Echo Micro Holographic 3 MOA Dot Sight is perfect for budget-minded individuals seeking to equip their concealed carry pistols with a red dot sight. It’s also suited for casual range shooters and those new to pistol optics who want an affordable entry point. However, users needing extreme durability or true holographic technology should consider other options.

Those who prioritize ruggedness or plan to use the sight in harsh environments should skip this product. You will also want to find another if you need a sight for professional use, such as law enforcement or competitive shooting. A must-have modification would be investing in a higher-quality battery to improve battery life.

Conclusion on XTS Echo Micro Holographic 3 MOA Dot Sight

The XTS Echo Micro Holographic 3 MOA Dot Sight offers a decent value proposition for its price. While it may not be a true holographic sight, its functionality as a red dot is adequate for many users. For those on a tight budget looking to enhance their pistol’s aiming capabilities, it’s a reasonable option.

The XTS Echo Micro Holographic 3 MOA Dot Sight is definitely worth its price. I would recommend it with the caveats regarding its durability and misleading marketing. Ultimately, do your research and consider your needs before buying.