Wilson Combat Reduced Power Mainsprings Government And Commander 27 Review

Let’s Dive into Wilson Combat Reduced Power Mainsprings Government And Commander 27

The Wilson Combat Reduced Power Mainsprings Government And Commander 27 are designed to offer a lighter hammer strike, potentially improving trigger pull and reducing muzzle flip, particularly in 1911 platforms chambered in 9mm, .38 Super, or .45 ACP when using lighter target loads. Wilson Combat is a well-respected name in the 1911 world, and these mainsprings aim to offer enhanced performance through optimized spring tension. I’ve always sought ways to fine-tune my 1911s for improved handling and accuracy, so naturally, this product piqued my interest.

My journey with 1911s has always been about achieving the perfect balance of reliability and performance. I had been experiencing some inconsistencies in primer ignition with lighter target loads in my custom-built 1911, and was looking for a solution without sacrificing reliability with standard ammunition.

The Wilson Combat Reduced Power Mainsprings Government And Commander 27 arrived in a simple, no-frills package, which is perfectly acceptable for a component like this. The spring itself appeared well-made, with a consistent coil pattern and a clean finish; the steel felt strong and resilient. Compared to a standard 23lb mainspring, the Wilson Combat version exhibited noticeably less resistance when compressed by hand.

I’ve used similar reduced power mainsprings from other manufacturers, like Wolff Gunsprings, in the past, but I was drawn to Wilson Combat’s reputation for quality and their specific recommendation for 9mm and .38 Super platforms. I chose this one specifically because Wilson Combat installs this exact mainspring in their own 9mm and .38 Super 1911 pistols.

My initial feeling was one of cautious optimism. I was excited to potentially improve my trigger feel and reduce muzzle flip, but I was also mindful of the importance of maintaining reliable ignition.

Check Best Price HERE

Real-World Testing: Putting Wilson Combat Reduced Power Mainsprings Government And Commander 27 to the Test

First Use Experience

My first experience with the Wilson Combat Reduced Power Mainsprings Government And Commander 27 was at my local indoor shooting range, where I primarily tested it with my Commander-sized 1911 chambered in .45 ACP using light target loads. The range was well-lit and climate-controlled, offering a controlled environment for assessing performance.

The most immediately noticeable difference was the reduced effort required to cock the hammer manually. The pistol cycled smoothly, and I didn’t experience any failures to feed or eject. One notable point: while the trigger pull felt lighter, I noticed no difference in primer strikes, using the same ammo as before.

There were no significant issues after the first range session, just a feeling of improved smoothness and control. I did, however, note a slight increase in perceived muzzle flip.

Extended Use & Reliability

After several weeks of consistent use (approximately 500 rounds fired), the Wilson Combat Reduced Power Mainsprings Government And Commander 27 have held up admirably. There are no visible signs of wear or deformation, and the spring tension feels consistent.

I inspected the spring regularly during cleaning, and found no signs of corrosion or fatigue. Compared to my previous experience with a standard power mainspring, the Wilson Combat version offered a more refined and less fatiguing shooting experience with light target loads.

I also performed a full disassembly and cleaning after each range session, which allowed me to thoroughly inspect the mainspring for any signs of wear. It is still performing excellently.

Breaking Down the Features of Wilson Combat Reduced Power Mainsprings Government And Commander 27

Specifications

• Recommended for: Full-Size (Government/Commander/Professional) 1911s in 9mm/.38 Super or .45 ACP. This specification is important because using it in a platform outside these recommendations might lead to reliability issues.
• Use: Specifically recommended for light target loads. Using it with higher-pressure rounds may cause cycling issues.
• Weight: The mainspring has a rating of 27. This is the hammer spring Wilson Combat installs in their full-size 9mm/.38 Super pistols.
• Compatibility: Designed for Government and Commander-sized frames. This is crucial because using it in smaller Officer’s models could lead to malfunctions.
• Safety: Wilson Combat recommends using their video #396 for proper installation. This is to ensure safe and correct installation and prevent possible injury or damage.

These specifications are crucial for understanding the intended application of the Wilson Combat Reduced Power Mainsprings Government And Commander 27. They ensure that the spring is used in compatible firearms and with appropriate ammunition, optimizing its performance and preventing potential reliability issues or safety hazards.

Performance & Functionality

The Wilson Combat Reduced Power Mainsprings Government And Commander 27 performs its job effectively, providing a lighter hammer strike and potentially improving trigger pull. Its reliability is generally good with appropriate ammunition, although some users may experience ignition issues with certain primers.

The main strength is the lighter trigger pull and reduced recoil impulse; the main weakness can be a marginal reduction in reliability with some ammunition types. It mostly meets expectations, particularly in improving trigger feel and reducing felt recoil with target loads.

Design & Ergonomics

The build quality is excellent, as expected from Wilson Combat. The spring is made from high-quality steel, offering good durability.

It’s a user-friendly modification, especially for those familiar with 1911 internals. Some disassembly and reassembly is required.

Durability & Maintenance

The Wilson Combat Reduced Power Mainsprings Government And Commander 27 should last for thousands of rounds with proper care. Regular cleaning and inspection are recommended to ensure optimal performance.

The mainspring is easy to replace with basic tools and requires no specialized maintenance. Replacing the part is as simple as removing the old one, and installing the new one.

Accessories and Customization Options

The Wilson Combat Reduced Power Mainsprings Government And Commander 27 is a standalone component and does not require any specific accessories. It’s designed to enhance the performance of the existing trigger system in a 1911 platform.

While no specific accessories are needed, it’s compatible with various other 1911 upgrades such as lighter trigger components and optimized firing pins. Be sure the spring is properly paired with those upgrades, however.

Pros and Cons of Wilson Combat Reduced Power Mainsprings Government And Commander 27