The WEAVER BASE PIVOT MOUNT 2PC 159* Made a Bold First Impression
The WEAVER BASE PIVOT MOUNT 2PC 159*. Even the name sounds rugged and ready. I’ve been an outdoor and tactical gear specialist for over a decade, and good mounting hardware is the unsung hero of any successful hunting or shooting setup. This little piece promised to be a solution for quickly detaching and reattaching optics, a feature I desperately needed on my go-to hunting rifle.
My primary hunting rifle, a trusty .30-06, had been experiencing an identity crisis. It needed to pull double duty – iron sights for close-range brush hunting and a magnified optic for longer-range shots across fields. Switching between these configurations used to be a time-consuming pain involving tools and the frustrating possibility of losing zero. I’d considered other quick-detach options like lever-style mounts, but they often added bulk and significant cost. The WEAVER BASE PIVOT MOUNT 2PC 159*, with its promise of a simple pivot mechanism and a remarkably low price of $8.99, seemed almost too good to be true.
The WEAVER BASE PIVOT MOUNT 2PC 159* arrived in a simple, no-frills package. The blued finish was even and consistent. My first impression was surprise at how compact they were. I’d expected something bulkier for a pivot mount. Compared to the bulky, more expensive quick-detach lever mounts I’d previously considered from Leupold and Warne, these Weaver mounts seemed elegantly simple. I was cautiously optimistic. Could these unassuming mounts solve my optic-swapping woes without breaking the bank or adding unnecessary weight?
Real-World Testing: Putting **WEAVER BASE PIVOT MOUNT 2PC 159*** to the Test
First Use Experience
My initial testing ground was my backyard range. I wanted to get a feel for the WEAVER BASE PIVOT MOUNT 2PC 159* before trusting them on a hunt. I mounted a lightweight red dot optic on a Picatinny rail section attached to the mounts. Installation was straightforward using the existing threaded holes on my rifle receiver. The pivot action was surprisingly smooth right out of the box.
The biggest test was zeroing the optic and then removing and reattaching it multiple times. I was concerned about repeatability. Would the zero shift every time I pivoted the optic? I was relieved to find that, after the first few pivots, the zero held remarkably well at 50 yards. There was a slight shift, maybe half an inch, but nothing that wouldn’t be acceptable for quick target acquisition in a hunting scenario. The conditions were dry and sunny. I suspect mud or ice could potentially impact the pivot mechanism’s performance.
Extended Use & Reliability
After several weeks of use, the WEAVER BASE PIVOT MOUNT 2PC 159* has proven more reliable than I initially expected. I’ve used them on several hunting trips, encountering everything from light rain to dusty conditions. The blued finish has held up well, showing no signs of rust or corrosion. The pivot action remains smooth, though I’ve started applying a tiny amount of gun oil to the pivot points after cleaning, just to ensure smooth operation.
Compared to past experiences with cheaper mounting solutions, these Weaver mounts are a pleasant surprise. They aren’t as rock-solid as a permanently mounted scope base, but the trade-off for quick detachability is well worth it. I wouldn’t trust them for extreme long-range precision shooting. But for my hunting needs, they perform admirably. Cleaning is simple: a quick wipe down with a lightly oiled cloth after each use.
Breaking Down the Features of **WEAVER BASE PIVOT MOUNT 2PC 159***
Specifications
- Manufacturer: Weaver
- Product Name: WEAVER BASE PIVOT MOUNT 2PC 159*
- Finish: Blue
- Type: 2-Piece Base Pivot Mount
- Mounting Style: Screw-on to receiver (specific screws not included, must match receiver threads)
- Material: Steel (likely carbon steel given the blued finish)
- Compatibility: Designed for rifles with Weaver-style base compatibility (requires appropriate spacing of mounting holes on the receiver)
- Intended Use: Allows for quick removal and reattachment of optics while (potentially) maintaining zero.
These specifications highlight the simplicity of the design. The blued steel construction offers decent durability for the price point. The key is the pivot feature, allowing the user to quickly switch between optic and iron sights. The screw-on mounting style necessitates knowing your rifle’s receiver threading, and that suitable screws need to be sourced separately.
Performance & Functionality
The primary function of the WEAVER BASE PIVOT MOUNT 2PC 159* is to provide a repeatable quick-detach mounting solution for optics. For general hunting and recreational shooting, they perform adequately. They are not designed for precision shooting where minute shifts in zero are unacceptable. The pivot mechanism allows for fast transitions between optics and iron sights, which is invaluable in dynamic hunting situations.
The mounts’ biggest strength is their simplicity and affordability. Weaknesses include a potential for slight zero shift after repeated pivoting and a lack of integrated recoil lugs for maximum stability. They definitely meet my expectations for a budget-friendly quick-detach system.
Design & Ergonomics
The design is basic, focusing on functionality over aesthetics. The blued steel construction is robust enough for most applications. The low profile of the WEAVER BASE PIVOT MOUNT 2PC 159* keeps the optic close to the bore axis, improving ergonomics and cheek weld.
There’s virtually no learning curve. Installation is straightforward if you’re familiar with mounting bases. The pivot mechanism is intuitive and easy to operate.
Durability & Maintenance
Given the price point, I don’t expect these mounts to last a lifetime of heavy use. However, with proper care, they should provide several years of reliable service. The blued finish is susceptible to rust if not properly maintained. Regular cleaning and light oiling are essential to prevent corrosion and ensure smooth pivot action. Repair is not really an option; replacement is the more practical route.
Accessories and Customization Options
The WEAVER BASE PIVOT MOUNT 2PC 159* doesn’t come with any accessories. Customization is limited to the optic or Picatinny rail section you choose to attach to the mounts. Compatibility is good with any standard Weaver-style or Picatinny rail-compatible optics.
Pros and Cons of **WEAVER BASE PIVOT MOUNT 2PC 159***
Pros
- Affordable Price: At around $9, these mounts are incredibly budget-friendly.
- Simple Pivot Mechanism: Allows for quick switching between optics and iron sights.
- Low Profile Design: Keeps the optic close to the bore axis.
- Decent Durability: The blued steel construction is reasonably robust for its price.
- Easy Installation: Straightforward mounting process for those familiar with rifle bases.
Cons
- Potential Zero Shift: Repeated pivoting can result in slight shifts in zero.
- No Recoil Lugs: Lacking integrated recoil lugs might not be ideal for high-recoil rifles.
- Blued Finish Susceptible to Rust: Requires diligent maintenance to prevent corrosion.
Who Should Buy **WEAVER BASE PIVOT MOUNT 2PC 159***?
Perfect for: Hunters who need to quickly switch between optics and iron sights in varying terrain, recreational shooters on a budget who want quick-detach functionality, and anyone looking for an affordable entry point into modular optic systems.
Who should skip this product? Precision shooters who demand absolute repeatability and minimal zero shift, those with high-recoil rifles seeking maximum mounting stability, and individuals who prioritize premium materials and long-term durability above all else.
Must-have accessories or modifications? A quality gun oil for maintaining the pivot mechanism, appropriate screws for mounting to your specific rifle receiver, and a Picatinny rail section (if needed) for attaching your chosen optic.
Conclusion on **WEAVER BASE PIVOT MOUNT 2PC 159***
The WEAVER BASE PIVOT MOUNT 2PC 159* is a budget-friendly option for those seeking a simple quick-detach mounting solution. They are not without their limitations. But for the price, they offer a surprisingly functional way to transition between optics and iron sights.
The value proposition is excellent. You’re getting a usable quick-detach system for the cost of a box of ammunition.
I would personally recommend these mounts to anyone who understands their limitations and is looking for an affordable way to add versatility to their rifle. If you need a simple, inexpensive, and functional quick-detach system, the WEAVER BASE PIVOT MOUNT 2PC 159* is worth considering. Pick up a set and give them a try – you might be surprised!
