First Thoughts on the Talley Scope Rings 11mm Dovetail CZ 452 Euro/455 30mm High Black
The Talley Scope Rings 11mm Dovetail CZ 452 Euro/455 30mm High Black are designed specifically for CZ rimfire rifles. These rings promise a secure and repeatable mounting solution for 30mm scopes. Talley Manufacturing is known for their high-quality, lightweight scope mounting solutions, and I was eager to see if these rings lived up to that reputation.
My search for these rings began after I acquired a beautiful CZ 455 Euro in .22LR. The rifle’s exceptional accuracy demanded a high-quality optic, and equally high-quality rings to ensure consistent performance. I needed rings that would securely hold the scope and withstand the recoil, however minimal, of the .22LR cartridge.
Upon receiving the Talley Scope Rings, my initial impression was positive. The black anodized finish looked clean and professional. The rings felt solid and well-machined in my hand.
I had been considering other options like the Warne 7.3/22 rings and some offerings from Burris. Ultimately, I chose the Talley rings for their reputation for being lightweight and precisely machined, as well as their specific compatibility with the CZ 452 and 455 dovetail. I wanted a dedicated solution, not something that might require modification.
My first impression was one of cautious optimism. They appeared to be well-made and fit the aesthetic of the rifle. I was excited to mount my scope and get to the range, but also a little apprehensive about whether they would truly live up to the hype.
Real-World Testing: Putting Talley Scope Rings 11mm Dovetail CZ 452 Euro/455 30mm High Black to the Test
First Use Experience
My first outing with the Talley Scope Rings was at my local outdoor shooting range. I mounted a Vortex Diamondback Tactical 3-9×40 scope onto my CZ 455 using the Talley rings. The mounting process was straightforward and the rings clamped securely onto the 11mm dovetail rail.
The weather was clear and mild, perfect for sighting in a new scope. After about 20 rounds, I noticed the scope seemed to be shifting slightly. I checked the ring screws and found they had loosened a bit.
This was a minor concern, but easily addressed with a dab of blue Loctite on the threads. Once tightened with Loctite, the rings held perfectly for the rest of the session, even after firing over 100 rounds.
Extended Use & Reliability
After several months of regular use, the Talley Scope Rings have proven to be a reliable mounting solution. I have taken the CZ 455 on several small game hunting trips in varying conditions. The rifle has been exposed to light rain, moderate humidity, and temperatures ranging from freezing to mild.
The rings have held zero consistently, even after being bumped around in a rifle case. There are no visible signs of wear and tear on the black anodized finish. Cleaning is easy; I simply wipe them down with a clean cloth after each use.
Compared to previous experiences with cheaper, generic scope rings, the Talley rings are a significant improvement. They provide a much more secure and stable platform for the scope. My confidence in their ability to maintain zero has greatly improved my accuracy and overall shooting experience.
Breaking Down the Features of Talley Scope Rings 11mm Dovetail CZ 452 Euro/455 30mm High Black
Specifications
The Talley Scope Rings 11mm Dovetail CZ 452 Euro/455 30mm High Black are precisely engineered for specific rifles. They are designed to fit the 11mm dovetail found on CZ 452 Euro and CZ 455 rifles. The rings accommodate scopes with a 30mm tube diameter.
The specified height of these rings is 0.600 inches, measured from the top of the receiver to the bottom of the scope tube. This high height is ideal for scopes with larger objective lenses to clear the barrel. The rings are finished with a durable black anodized coating.
These specifications are important because they ensure a proper fit and alignment between the scope and the rifle. The correct height prevents the scope from contacting the barrel, while the secure mounting system ensures consistent accuracy. The anodized finish provides corrosion resistance and a sleek appearance.
Performance & Functionality
The Talley Scope Rings perform their primary function exceptionally well: securely holding the scope. Once properly installed and tightened, the rings provide a rock-solid platform that maintains zero even under moderate recoil. The 30mm diameter rings offer a wide range of scope compatibility.
The initial loosening of the screws was a minor issue, but easily resolved with Loctite. The only area for improvement would be to include pre-applied thread locker from the factory. Otherwise, they have exceeded expectations in terms of stability and reliability.
Design & Ergonomics
The Talley rings are designed with simplicity and functionality in mind. The all-aluminum construction keeps the weight to a minimum, which is a significant advantage on a lightweight rifle like the CZ 455. The black anodized finish complements the rifle’s aesthetics.
The installation process is relatively straightforward, requiring only a basic understanding of scope mounting. There is a slight learning curve in terms of determining the correct torque for the screws, but this can be easily addressed by consulting online resources or a gunsmith.
Durability & Maintenance
Based on my experience, the Talley Scope Rings are built to last. The anodized aluminum is resistant to corrosion and scratches. The simple design minimizes the number of potential failure points.
Maintenance is minimal. Regular cleaning with a soft cloth is sufficient to keep them in good condition. The screws should be periodically checked for tightness, especially after extended use.
Accessories and Customization Options
The Talley Scope Rings themselves do not offer a wide range of customization options. They are designed to be a simple and functional mounting solution. The primary customization aspect is the choice of scope that is mounted within the rings.
The 30mm diameter makes them compatible with a vast range of scopes from various manufacturers. There are no directly compatible accessories from Talley beyond different ring heights. The rings are compatible with any standard scope base screws, allowing for use of aftermarket screws if desired.
Pros and Cons of Talley Scope Rings 11mm Dovetail CZ 452 Euro/455 30mm High Black
Pros
- Lightweight design doesn’t add unnecessary weight to the rifle.
- Precise machining ensures a secure and repeatable scope mount.
- Specifically designed for CZ 452 and 455 rifles for optimal fit.
- Durable black anodized finish provides corrosion resistance and aesthetic appeal.
- Maintains zero consistently even after extended use and minor bumps.
Cons
- Screws may initially loosen and require thread locker for optimal performance.
- Relatively simple design may lack some of the advanced features found on more expensive rings.
Who Should Buy Talley Scope Rings 11mm Dovetail CZ 452 Euro/455 30mm High Black?
These Talley Scope Rings are perfect for CZ 452 and 455 owners who prioritize a lightweight and reliable scope mounting solution. They are ideal for small game hunters, target shooters, and anyone who values accuracy and consistency. These rings are a great choice for those looking to mount a 30mm scope without adding unnecessary bulk or weight to their rifle.
Those seeking advanced features like quick-detach levers or adjustable windage might want to skip this product. These rings are designed for a simple, secure, and permanent mounting solution. A must-have accessory is a high-quality torque wrench to ensure proper screw tension during installation. Blue Loctite is also highly recommended for preventing screws from loosening over time.
Conclusion on Talley Scope Rings 11mm Dovetail CZ 452 Euro/455 30mm High Black
Overall, the Talley Scope Rings 11mm Dovetail CZ 452 Euro/455 30mm High Black are an excellent choice for CZ rifle owners. They offer a lightweight, reliable, and aesthetically pleasing scope mounting solution. The initial loosening of the screws was a minor inconvenience, but easily addressed with Loctite.
At a price of $49.49, these rings offer a solid value proposition. They are significantly better than cheaper, generic rings and provide comparable performance to more expensive options. I would personally recommend these rings to anyone looking to mount a 30mm scope on their CZ 452 or 455 rifle.
If you’re looking for a no-nonsense, dependable scope mounting solution for your CZ, the Talley Scope Rings are a worthy investment. Secure your scope and your accuracy; grab a set today!