Tactical Slip-On Grip Glove Fits Smith & Wesson M&P Review

First Thoughts on the Tactical Slip-On Grip Glove Fits Smith & Wesson M&P

The Tactical Slip-On Grip Glove Fits Smith & Wesson M&P from Pachmayr promises enhanced control and recoil reduction for a popular line of pistols. This grip glove claims to be custom molded and made of Decelerator material, and at a mere $8.49, it piqued my interest as a potentially cost-effective upgrade.

I was searching for an affordable way to improve the grip on my Smith & Wesson M&P 9mm. The factory grip, while functional, can become slick during extended range sessions or in less-than-ideal weather. The promise of enhanced recoil reduction was also appealing, as it could potentially improve my accuracy and reduce fatigue.

Upon receiving the grip glove, I immediately noticed its simple, no-frills design. The Decelerator material felt grippy to the touch, and the molded finger grooves seemed promising. The overall build quality appeared decent for the price, although I reserved judgment until I could actually install and use it.

I considered other options like Talon Grips and Hogue rubber grips. The Talon Grips offer a textured surface, but I was looking for something with more cushioning. The Hogue grips are excellent but are often more expensive and involve a more involved installation process. My hope was that the Tactical Slip-On Grip Glove Fits Smith & Wesson M&P would offer a good balance of affordability, ease of installation, and improved grip.

My initial impression was cautiously optimistic. The price was right, and the design looked promising. However, I was also aware that slip-on grips can sometimes feel loose or shift during use, so I was eager to see how it performed in real-world testing.

Real-World Testing: Putting Tactical Slip-On Grip Glove Fits Smith & Wesson M&P to the Test

First Use Experience

I tested the Tactical Slip-On Grip Glove Fits Smith & Wesson M&P at my local outdoor shooting range. The weather was warm and sunny, a typical day. I fired approximately 200 rounds through my M&P 9mm, focusing on drills that involved rapid firing and quick target acquisition.

The grip glove noticeably improved my control, especially during rapid firing. The Decelerator material provided a secure grip even when my hands became sweaty. The finger grooves helped me maintain a consistent grip, contributing to better accuracy.

Installation was a breeze, taking less than a minute. The glove slipped on easily but felt snug once in place. Initially, I experienced a slight bulge at the backstrap. However, this seemed to settle down after a few magazines.

Extended Use & Reliability

After several months of use, the Tactical Slip-On Grip Glove Fits Smith & Wesson M&P has held up remarkably well. I’ve used it in various conditions, from dry range days to rainy training sessions. It has consistently provided a secure and comfortable grip.

There are some minor signs of wear and tear, primarily around the edges of the finger grooves. These are merely cosmetic, and the grip glove’s functionality hasn’t been compromised. The Decelerator material remains grippy, and there are no signs of cracking or tearing.

Maintenance is simple. I occasionally wipe it down with a damp cloth to remove dirt and grime. It’s also resistant to cleaning solvents.

Previously, I had used grip tape on my M&P. The Tactical Slip-On Grip Glove Fits Smith & Wesson M&P is a significant improvement. It offers better cushioning, is more comfortable, and doesn’t peel or wear out like grip tape.

Breaking Down the Features of Tactical Slip-On Grip Glove Fits Smith & Wesson M&P

Specifications

The Tactical Slip-On Grip Glove Fits Smith & Wesson M&P boasts several key features:

• Stretch-to-Fit Design: Custom molded for Smith & Wesson M&P pistols, ensuring a snug fit without the need for trimming. This eliminates guesswork and allows for quick and easy installation.
• Pachmayr Decelerator Material: Made from Pachmayr’s proven Decelerator material, known for its recoil reduction and enhanced grip. This offers both comfort and improved control.
• Ventilated Side Panels: Features distinctive ventilated side panels to promote airflow and reduce sweat buildup. This helps maintain a secure grip in hot or humid conditions.
• Finger Grooves: Includes molded finger grooves for improved ergonomics and a consistent grip. These contribute to better accuracy and control.

These specifications are critical for performance. The snug fit ensures the grip doesn’t shift during firing. The Decelerator material and finger grooves significantly enhance grip and recoil management, leading to improved accuracy and comfort.

Performance & Functionality

The Tactical Slip-On Grip Glove Fits Smith & Wesson M&P performs its job admirably. It effectively enhances grip, reduces felt recoil, and improves overall control of the pistol.

Its main strength is its simplicity and effectiveness. It provides a noticeable improvement in grip without requiring any permanent modifications to the firearm. A potential weakness is that it may not fit perfectly on all M&P variants. Some users with larger hands might find the finger grooves slightly cramped.

The product exceeds my expectations for its price point. I was initially skeptical about the claims of recoil reduction. However, I was pleasantly surprised by how much it reduced felt recoil and improved my shooting experience.

Design & Ergonomics

The Tactical Slip-On Grip Glove Fits Smith & Wesson M&P is designed with functionality in mind. The Decelerator material offers a comfortable and secure grip. The finger grooves, while potentially problematic for users with larger hands, generally improve ergonomics for most shooters.

The build quality is good for the price. The material feels durable and well-made. There is a slight learning curve, as the added thickness of the grip can initially affect the feel of the trigger reach.

Durability & Maintenance

The Tactical Slip-On Grip Glove Fits Smith & Wesson M&P is surprisingly durable. It has withstood regular use in various conditions without significant wear and tear.

Maintenance is straightforward. A simple wipe-down with a damp cloth is usually sufficient to keep it clean.

Accessories and Customization Options

The Tactical Slip-On Grip Glove Fits Smith & Wesson M&P doesn’t come with any accessories. It also doesn’t offer many customization options.

However, it’s compatible with most standard M&P holsters. Due to the slight increase in grip size, some very tight-fitting holsters may require adjustment.

Pros and Cons of Tactical Slip-On Grip Glove Fits Smith & Wesson M&P

Who Should Buy Tactical Slip-On Grip Glove Fits Smith & Wesson M&P?

Perfect for: M&P owners looking for an affordable and easy way to improve their grip and reduce felt recoil. This is also a great option for new shooters who may be developing their grip technique. Competitive shooters and those who engage in extended range sessions can also benefit.

Who should skip this product? Those with exceptionally large hands may find the finger grooves uncomfortable. Those who prefer a more customized or permanent grip solution may want to consider other options.

Must-have accessories or modifications? Not necessarily, but a quality holster that accommodates the slightly thicker grip is recommended.

Conclusion on Tactical Slip-On Grip Glove Fits Smith & Wesson M&P

The Tactical Slip-On Grip Glove Fits Smith & Wesson M&P is an excellent value for the money. For just $8.49, it provides a significant improvement in grip, recoil reduction, and overall control.

The price is absolutely justified. This grip glove offers a tangible improvement in performance without breaking the bank.

I would definitely recommend it. It’s a simple, effective, and affordable upgrade for any Smith & Wesson M&P pistol owner. If you’re looking for a way to enhance your shooting experience without spending a fortune, the Tactical Slip-On Grip Glove Fits Smith & Wesson M&P is a great place to start. Try it out, and experience the difference a better grip can make!