Let’s Talk About Tacfire Mossberg 500 Shotgun Pistol Grip
The Tacfire Mossberg 500 Shotgun Pistol Grip promises an affordable way to enhance the maneuverability of your Mossberg 500 shotgun. Offered by TacFire, this pistol grip aims to provide a compact and aggressive alternative to a traditional stock. But in the world of tactical gear, does a lower price tag translate to lower performance?
My shotgun needed a more compact profile for tight spaces, especially during home defense drills. I wanted something that would make the weapon easier to wield in confined areas. I was drawn to the Tacfire Mossberg 500 Shotgun Pistol Grip due to its low price point, thinking it might be a budget-friendly solution.
Upon unboxing, I immediately noticed the hard plastic construction. The grip felt surprisingly lightweight, almost too light. The lack of any rubberized texture or padding was apparent, raising concerns about recoil absorption and overall comfort during extended use.
I considered a Hogue pistol grip and a Magpul SGA stock before settling (at least initially) on the Tacfire. The Hogue was slightly more expensive but had a better reputation for comfort. The Magpul SGA was a different beast entirely – offering adjustability but at a much higher price. My hope was that the Tacfire grip would offer a decent middle ground, emphasizing compactness over all-out comfort.
My initial reaction was lukewarm. While the grip looked okay aesthetically and fit the Mossberg 500 without issue, the hard plastic and lack of ergonomics were immediately apparent. I was definitely concerned about recoil and felt a slight pang of regret for not springing for the Hogue.
Real-World Testing: Putting Tacfire Mossberg 500 Shotgun Pistol Grip to the Test
First Use Experience
My first test was at an outdoor shooting range, where I ran several drills with the Tacfire Mossberg 500 Shotgun Pistol Grip. The weather was mild, with a slight breeze. I focused on target acquisition and rapid firing.
Recoil was… significant. The hard plastic transmitted the full force of each shot directly into my wrist. After only a few rounds, discomfort started to set in, and after about twenty rounds, it became downright painful.
The grip was easy to install, and manipulation of the shotgun was definitely quicker in tight scenarios compared to the stock. However, the trade-off in comfort was steeper than I anticipated. The grip itself isn’t particularly ergonomic, so maintaining a solid hold under recoil required a very firm and fatiguing grip.
I immediately regretted not spending a bit more. It became clear that this grip was only suitable for very limited use – perhaps in an emergency situation where compactness is paramount, but definitely not for any kind of extended practice or training.
Extended Use & Reliability
After a few more range sessions, my opinion of the Tacfire Mossberg 500 Shotgun Pistol Grip hadn’t improved. The grip held up physically, with no cracks or breaks in the plastic. However, the discomfort only worsened with repeated use.
Cleaning was simple – the hard plastic wiped down easily. However, I didn’t feel motivated to use or maintain it frequently because of the shooting experience. I ended up switching back to my original stock and relegating the Tacfire grip to the back of my gear closet.
Compared to my previous experiences with other grips (including the factory stock and a rubberized aftermarket option), the Tacfire grip was a major disappointment. It highlighted the importance of ergonomics and recoil absorption, even in a relatively light shotgun like the Mossberg 500.
Breaking Down the Features of Tacfire Mossberg 500 Shotgun Pistol Grip
Specifications
- Manufacturer: TacFire
- Color: Black
- Condition: New
- Material: Polymer (Plastic)
- Compatibility: Mossberg 500 Shotgun
These specifications highlight the grip’s basic design and compatibility. The lack of specific details about the type of polymer used is concerning, as it suggests a focus on cost savings over material quality.
Performance & Functionality
The Tacfire Mossberg 500 Shotgun Pistol Grip technically functions as intended – it allows you to hold and fire the shotgun. However, the overall experience is far from ideal. The recoil is harsh, and the lack of ergonomics makes it difficult to maintain a solid grip and accurate aim.
The main strength is its simplicity and affordability. The major weakness is the significant discomfort it causes during use. It falls far short of expectations for anything beyond very limited, emergency use.
Design & Ergonomics
The build quality is basic. The hard plastic feels cheap and offers no cushioning. The grip’s shape isn’t particularly ergonomic, leading to hand fatigue.
There is essentially no learning curve, as it’s a very simple design. However, mastering accurate shooting with this grip due to the recoil and lack of control is challenging. The absence of any texturing or grip enhancement further contributes to the ergonomic shortcomings.
Durability & Maintenance
The hard plastic seems durable enough to withstand regular use, although long-term exposure to the elements might cause it to become brittle. Maintenance is straightforward – simply wipe it down with a damp cloth. However, the discomfort it inflicts discourages frequent use, minimizing the need for maintenance.
Accessories and Customization Options
The Tacfire Mossberg 500 Shotgun Pistol Grip doesn’t come with any accessories. There are no customization options, such as interchangeable backstraps or grip panels. It’s a bare-bones design intended to be a simple replacement for the factory stock.
It is compatible with any Mossberg 500 that accepts aftermarket stocks/grips, making installation straightforward. However, its limited functionality and poor ergonomics make accessorizing pointless.
Pros and Cons of Tacfire Mossberg 500 Shotgun Pistol Grip
Pros
- Affordable Price: The primary and perhaps only significant advantage is its low cost.
- Compact Size: It reduces the overall length of the shotgun, improving maneuverability in tight spaces.
- Easy Installation: It’s a simple drop-in replacement for the factory stock.
- Lightweight: It doesn’t add much weight to the shotgun.
Cons
- Harsh Recoil: The hard plastic transmits significant recoil to the wrist, causing discomfort and pain.
- Poor Ergonomics: The grip shape is not particularly comfortable or conducive to accurate shooting.
- Lack of Features: It lacks any features such as rubberized grips, adjustable straps, or accessory mounting points.
Who Should Buy Tacfire Mossberg 500 Shotgun Pistol Grip?
The Tacfire Mossberg 500 Shotgun Pistol Grip is perfect for someone on an extremely tight budget who absolutely needs a shorter shotgun for storage or very occasional use and is willing to tolerate significant discomfort.
Those prioritizing comfort, control, and accuracy should skip this product. Spend a little more for a higher-quality grip with better ergonomics and recoil absorption.
A must-have modification would be to add some sort of padding or rubber overgrip to mitigate the discomfort. However, at that point, it might be more cost-effective to simply buy a better grip in the first place.
Conclusion on Tacfire Mossberg 500 Shotgun Pistol Grip
The Tacfire Mossberg 500 Shotgun Pistol Grip is a testament to the old adage: you get what you pay for. While the price is tempting, the significant discomfort and lack of features make it a questionable investment for anyone serious about shooting their Mossberg 500.
The value proposition is weak. The low price doesn’t justify the compromises in comfort and performance.
Personally, I would not recommend it. There are better options available for a slightly higher price. If you value your wrists and your accuracy, look elsewhere.
Before buying the Tacfire Mossberg 500 Shotgun Pistol Grip, seriously consider if the low price is worth the compromise in shooting comfort and accuracy. Invest in a better grip; you will thank yourself later.
