Tacfire AR15 4-Piece Upper Spring Kit Review

Let’s Dive into Tacfire AR15 4-Piece Upper Spring Kit

The AR-15 platform is known for its modularity, and that extends down to even the smallest components. The Tacfire AR15 4-Piece Upper Spring Kit aims to provide essential replacement springs for your AR’s upper receiver. For a budget-conscious shooter or armorer, this kit promises to keep your rifle running smoothly.

I’ve been building and maintaining AR-15s for over a decade, and springs are often overlooked until they fail. When malfunctions start occurring that can be difficult to diagnose, replacing the springs is often the first step. I was looking for an inexpensive way to refresh the upper receiver of a training rifle.

Upon opening the small package, the springs appeared as expected. They looked to be of decent quality, with a clean silver finish. My initial impression was neutral; they are springs, after all.

I’ve used spring kits from Brownells and CMMG in the past. I chose the Tacfire AR15 4-Piece Upper Spring Kit due to its incredibly low price. It seemed like a no-brainer for a basic parts replacement on a rifle that sees a lot of use.

I was cautiously optimistic. Springs are crucial for proper function, and a subpar kit could cause more problems than it solves. At this price point, I was prepared for the possibility of needing to source a higher-quality replacement if these failed to perform.

Check Best Price HERE

Real-World Testing: Putting Tacfire AR15 4-Piece Upper Spring Kit to the Test

First Use Experience

I installed the Tacfire AR15 4-Piece Upper Spring Kit in the upper receiver of my primary AR-15 training rifle. This rifle is typically used at an outdoor range and in force-on-force training scenarios. The conditions can range from hot and dusty to wet and muddy.

The rifle functioned without issue during the first range session after installing the springs. Approximately 200 rounds were fired with no noticeable difference in performance compared to the original springs. It was reassuring to see immediate positive results.

The installation was straightforward, requiring no specialized tools beyond standard AR-15 armorer’s tools. No time was needed to get used to it. Functionality was as expected with the new Tacfire springs in place.

There were no immediate surprises or issues. The rifle cycled and ejected properly, and the forward assist functioned normally. The only observation was that the forward assist spring felt slightly stiffer than the original.

Extended Use & Reliability

After several months and approximately 1,000 rounds, the Tacfire AR15 4-Piece Upper Spring Kit continues to perform adequately. There has been no degradation in performance. The springs are still holding up.

There are no obvious signs of wear and tear. They still look and feel like new. Discoloration or deformation hasn’t been observed.

Maintenance is simple, involving only occasional cleaning with CLP during routine rifle maintenance. There are no special cleaning requirements for springs. They are standard AR parts.

Compared to previous experiences with higher-priced spring kits, the Tacfire AR15 4-Piece Upper Spring Kit performs similarly. Functionality is identical, at least for the limited round count. It’s a solid value for the money so far.

Breaking Down the Features of Tacfire AR15 4-Piece Upper Spring Kit

Specifications

The Tacfire AR15 4-Piece Upper Spring Kit includes four essential springs for the AR-15 upper receiver. These springs are for the ejection port cover, forward assist, and their associated detents. The springs are made of steel with a silver finish.

These specifications are crucial for proper upper receiver function. Correct spring tension ensures the ejection port cover stays closed when it should and opens when the bolt carrier group cycles. The forward assist spring allows the forward assist to properly engage the bolt carrier in case of a failure to fully chamber a round. These components must function correctly for the rifle to operate reliably.

Performance & Functionality

The Tacfire AR15 4-Piece Upper Spring Kit performs its job adequately. It provides the necessary spring tension to operate the ejection port cover and forward assist effectively. The kit meets expectations for a basic spring replacement.

The strengths lie in its simplicity and low cost. It effectively replaces worn or broken springs, restoring functionality to the upper receiver. The main weakness is the lack of detailed material specifications.

It meets expectations for a basic spring replacement kit. It gets the job done without any frills. It is not a high-performance kit by any means, but it works.

Design & Ergonomics

The Tacfire AR15 4-Piece Upper Spring Kit is designed for easy installation and functionality. The silver finish is clean and professional-looking. These parts do their job without getting in the way.

It is user-friendly with no learning curve. Anyone familiar with basic AR-15 maintenance can easily install these springs. Installation is a simple, drop-in process.

Durability & Maintenance

The lifespan of the Tacfire AR15 4-Piece Upper Spring Kit is yet to be fully determined, but initial testing suggests it will last for a reasonable amount of time. Proper maintenance will only extend that time. As springs wear over time, they may need replacement.

Maintenance involves occasional cleaning with CLP or other gun cleaning solvents. Regular cleaning will remove any dirt or debris that could accelerate wear and tear. Springs are inexpensive and easy to replace.

Accessories and Customization Options

The Tacfire AR15 4-Piece Upper Spring Kit does not come with any additional accessories. It’s a basic spring replacement kit. There are no customization options beyond the standard function of the springs.

The springs are compatible with any standard AR-15 upper receiver. The kit doesn’t offer any unique customization features beyond basic function. The kit is designed to fit any standard AR15, but no other brands are specifically necessary or useful.

Pros and Cons of Tacfire AR15 4-Piece Upper Spring Kit

Check Best Price HERE

Who Should Buy Tacfire AR15 4-Piece Upper Spring Kit?

This kit is perfect for budget-conscious AR-15 owners. Those who need a simple, inexpensive way to replace worn or broken upper receiver springs. It is also suitable for armorers who want to keep spare parts on hand.

This product is not for individuals seeking high-performance or ultra-durable components. Those who prioritize top-tier materials and maximum lifespan should look elsewhere. For users who want extreme confidence in the parts’ origin and construction, this budget kit may not instill that confidence.

A must-have accessory is a set of basic AR-15 armorer’s tools. These include punches, a hammer, and potentially an upper receiver vise block. They’ll be needed for proper installation.

Conclusion on Tacfire AR15 4-Piece Upper Spring Kit

The Tacfire AR15 4-Piece Upper Spring Kit is a functional and affordable option for basic spring replacement. While long-term durability remains to be seen, the initial performance is satisfactory. At its incredibly low price, it’s hard to argue with the value proposition.

The price is definitely justified. This is an inexpensive way to get an AR back up and running. It won’t break the bank.

I would recommend the Tacfire AR15 4-Piece Upper Spring Kit to budget-minded AR-15 owners. As long as one understands the limitations. It’s a practical solution for restoring basic upper receiver functionality.

If you’re looking for a cost-effective way to keep your AR-15 running, give the Tacfire AR15 4-Piece Upper Spring Kit a try. You might be surprised at how well it performs for the price. Be sure to have the proper tools and knowledge for installation.