The SureFire XSC 3.7 volts Li-Polymer 200 mAh Made a Bold First Impression
The SureFire XSC 3.7 volts Li-Polymer 200 mAh battery is a seemingly small component, but it’s the lifeblood of the SureFire XSC weaponlight. It’s designed specifically for the micro-compact platform, promising reliable power in a tiny package, a necessity for those trusting their XSC in critical situations. I was driven to this product by the simple need for a spare battery.
My primary concern was ensuring I had backup power for my SureFire XSC weaponlight during extended range sessions and concealed carry. Upon unboxing, the battery felt solid and well-constructed, typical of SureFire products, although there isn’t much to feel given it’s a small battery. The three-LED fuel gauge is a smart addition, allowing for quick power level checks.
Many similar batteries exist, but the SureFire name and reputation for quality swayed me, plus the integrated fuel gauge is a cut above generic options. Off-brand batteries might be cheaper, but the potential for unreliability and shorter lifespan made the SureFire battery the obvious choice. My first impression was cautiously optimistic, hoping it lives up to the SureFire standard for reliability.
Real-World Testing: Putting SureFire XSC 3.7 volts Li-Polymer 200 mAh to the Test
First Use Experience
I tested the SureFire XSC 3.7 volts Li-Polymer 200 mAh battery at the shooting range during a practice session focused on low-light drills. The battery was already installed in my SureFire XSC Weaponlight. Conditions were dry and mild.
The SureFire XSC weaponlight, powered by this battery, performed flawlessly throughout the session, providing consistent illumination during rapid target acquisition exercises. I experienced no flickering or dimming. The ease of swapping the SureFire XSC 3.7 volts Li-Polymer 200 mAh battery is seamless, thanks to the XSC’s design. No initial issues arose, and I was able to focus on my training.
Extended Use & Reliability
After several months of consistent use, including weekly range sessions and daily concealed carry, the SureFire XSC 3.7 volts Li-Polymer 200 mAh battery has proven reliable. It has exhibited no signs of degradation. I check the fuel gauge periodically and recharge as needed using the SureFire charger (sold separately, sadly).
The battery continues to deliver consistent performance without noticeable reduction in output. Maintenance is minimal. Just keep the contacts clean and free of debris. It outperforms generic CR123 batteries I’ve used in other lights in terms of runtime and consistent output.
Breaking Down the Features of SureFire XSC 3.7 volts Li-Polymer 200 mAh
Specifications
The SureFire XSC 3.7 volts Li-Polymer 200 mAh is a rechargeable lithium polymer battery specifically designed for the SureFire XSC weaponlight. It provides 3.7 volts of power with a 200 mAh capacity. This ensures optimal performance within the XSC’s compact design.
The three-LED fuel gauge indicates the remaining power level, offering visual confirmation of battery status. Its compact size and rechargeable nature make it a practical alternative to disposable batteries. This saves money and reduces environmental impact.
Performance & Functionality
The SureFire XSC 3.7 volts Li-Polymer 200 mAh battery excels at reliably powering the SureFire XSC weaponlight. It provides consistent illumination for the duration of its charge. This is critical in self-defense situations.
Its strength lies in its dependable performance, but the relatively low capacity (200 mAh) means runtimes are limited compared to larger batteries. The battery meets my expectations for a dedicated weaponlight battery, although a slightly higher capacity would be welcome. Longer runtimes are always better.
Design & Ergonomics
The SureFire XSC 3.7 volts Li-Polymer 200 mAh is designed for seamless integration with the SureFire XSC weaponlight. Its compact dimensions ensure a snug fit. The battery’s light weight has a negligible impact on the overall weight of the weaponlight and firearm.
The design is utilitarian and functional, prioritizing performance over aesthetics. There is no learning curve. Simply insert the battery into the charger, or weaponlight, and it’s ready to use.
Durability & Maintenance
The SureFire XSC 3.7 volts Li-Polymer 200 mAh battery exhibits good durability, maintaining its charge capacity over repeated charge cycles. With proper care, it should provide years of reliable service. Maintenance is straightforward. Keep the battery contacts clean and avoid extreme temperatures.
Accessories and Customization Options
The primary accessory for the SureFire XSC 3.7 volts Li-Polymer 200 mAh is the SureFire XSC Charger (sold separately). A spare battery is a must-have. Unfortunately, there are no customization options since it’s a power source.
Third-party chargers may exist, but using the official SureFire charger is recommended to ensure optimal charging and prevent damage. Using a non-SureFire charger could void the warranty.
Pros and Cons of SureFire XSC 3.7 volts Li-Polymer 200 mAh
Pros
- Provides reliable power specifically designed for the SureFire XSC weaponlight.
- Integrated three-LED fuel gauge offers quick and easy battery status checks.
- Rechargeable Li-Polymer design saves money and reduces environmental impact compared to disposable batteries.
- Compact size and lightweight design minimize bulk and weight on a concealed carry firearm.
- Maintains charge capacity well over repeated charge cycles.
Cons
- Relatively low 200 mAh capacity results in shorter runtimes compared to larger batteries.
- SureFire XSC Charger is sold separately, adding to the overall cost.
- Proprietary design limits compatibility to the SureFire XSC weaponlight.
Who Should Buy SureFire XSC 3.7 volts Li-Polymer 200 mAh?
Perfect for: Concealed carry users who rely on the SureFire XSC weaponlight and require a dependable power source, as well as range enthusiasts who shoot regularly with the SureFire XSC and want a spare battery for extended sessions. This is also useful for law enforcement officers.
Who should skip this product? Anyone who doesn’t own a SureFire XSC weaponlight. The battery is useless without it.
Must-have accessories or modifications? A SureFire XSC Charger and a second SureFire XSC 3.7 volts Li-Polymer 200 mAh battery. Redundancy is key.
Conclusion on SureFire XSC 3.7 volts Li-Polymer 200 mAh
The SureFire XSC 3.7 volts Li-Polymer 200 mAh is a crucial component for anyone invested in the SureFire XSC weaponlight system. While the limited capacity and the need to purchase the charger separately are drawbacks, the reliability, integrated fuel gauge, and rechargeable nature make it a worthwhile investment. The $31.00 price is justified.
I would personally recommend this battery to any SureFire XSC owner. Having a spare battery ensures you’re never caught in the dark. Don’t wait until your battery dies; get a spare SureFire XSC 3.7 volts Li-Polymer 200 mAh battery today and keep your XSC weaponlight ready for action!