First Impressions of Strike Industries Overmolded Enhanced Pistol Grip
The Strike Industries Overmolded Enhanced Pistol Grip promises a significant upgrade over the notoriously uncomfortable factory grip on the CZ Scorpion EVO and 3+. As a long-time shooter and gear enthusiast, I’ve always been on the hunt for improvements in ergonomics and control, especially in pistol grips, where the interface between the shooter and the weapon is most direct. I was eager to see if Strike Industries delivered on its promise of enhanced comfort and better control.
The stock grip on my Scorpion always felt a bit too slick, a common complaint among Scorpion owners. Aftermarket options often disappoint with either cheap plastic construction or lack of sufficient grip texture. I hoped the Strike Industries Overmolded Enhanced Pistol Grip would address both issues, offering a superior feel and improved handling.
Unboxing the grip, I was immediately impressed by the feel of the rubber overmolding. The rubberized texture felt substantial and grippy, a stark contrast to the slick polymer of the original grip. The weight felt good in hand, and the overall build quality appeared solid.
I had considered alternatives like the Yeti Wurks grip, but user reviews mentioning the squared-off area on the backstrap deterred me. The Strike Industries option seemed like a safer bet for all-around comfort. My first impression was definitely positive. I was excited to install it and see how it performed at the range.
Real-World Testing: Putting Strike Industries Overmolded Enhanced Pistol Grip to the Test
First Use Experience
I tested the Strike Industries Overmolded Enhanced Pistol Grip at my local indoor range, focusing on rapid target acquisition and controlled bursts. The range environment was relatively controlled, but even with sweaty hands after a few magazines, the grip provided a secure and confident hold. The 15-degree grip angle immediately felt more natural than the steeper angle of the stock grip.
The improved ergonomics were noticeable, especially during extended shooting sessions. I experienced less wrist fatigue compared to using the factory grip. There were no immediate issues or surprises. The grip felt like a significant improvement right out of the gate.
Extended Use & Reliability
After several months of regular use, the Strike Industries Overmolded Enhanced Pistol Grip has held up remarkably well. There are no visible signs of wear or tear on the rubber overmolding. The grip still feels as secure and comfortable as it did on day one.
Maintenance is straightforward. A quick wipe down with a damp cloth is all it takes to remove any dirt or grime. Comparing it to my previous experiences with other aftermarket grips, the Strike Industries option has significantly outperformed them in both comfort and durability.
Breaking Down the Features of Strike Industries Overmolded Enhanced Pistol Grip
Specifications
The Strike Industries Overmolded Enhanced Pistol Grip is designed specifically for the CZ Scorpion EVO 3 and 3+. It offers a 15-degree grip angle, promoting a more natural wrist position.
The grip features a rubberized overmolded surface on a lightweight polymer frame. This combination provides both durability and enhanced grip texture. The grip weighs in at 3.2 oz.
The overall length is 125.18 mm. It is a drop-in replacement, making installation simple. The grip also includes a storage compartment with a plug.
The optional Strike Pistol Grip Plug Tool Holder Insert can be added for storing tools or a CR2032 battery. The storage compartment is not waterproof.
These specifications are important because they directly impact the comfort, control, and functionality of the CZ Scorpion EVO. The grip angle and rubber overmolding are key to improving ergonomics. The lightweight polymer ensures minimal added weight.
Performance & Functionality
The Strike Industries Overmolded Enhanced Pistol Grip significantly improves the handling and control of the CZ Scorpion. The rubberized texture provides a secure grip, even in wet or sweaty conditions. The 15-degree grip angle promotes a more natural wrist position, reducing fatigue during extended shooting sessions.
The grip functions perfectly as a drop-in replacement. The storage compartment is a convenient feature for storing small tools or batteries. The only potential weakness is the non-waterproof nature of the storage compartment.
The grip meets and exceeds my expectations. It has become an essential upgrade for my CZ Scorpion. It offers a noticeable improvement in comfort and control compared to the factory grip.
Design & Ergonomics
The build quality of the Strike Industries Overmolded Enhanced Pistol Grip is excellent. The materials used feel durable and well-made. The rubber overmolding provides a comfortable and secure grip.
The design is user-friendly. Installation is simple and straightforward. There is no learning curve involved. The grip immediately feels natural and intuitive in hand.
Durability & Maintenance
The Strike Industries Overmolded Enhanced Pistol Grip appears to be highly durable. The rubber overmolding is resistant to wear and tear. The lightweight polymer frame is robust and well-constructed.
Maintenance is minimal. A simple wipe down with a damp cloth is all that is needed to keep the grip clean. It is designed to last through regular use and adverse conditions.
Accessories and Customization Options
The Strike Industries Overmolded Enhanced Pistol Grip is compatible with the Strike Industries Pistol Grip Plug Tool Holder Insert. This allows for customizable storage within the grip. The grip also pairs well with the Strike Industries Selector Switch for CZ Scorpion EVO for improved ergonomics.
The grip is designed as a direct replacement for the factory grip, meaning it will be compatible with any standard Scorpion that can accept an aftermarket grip. There are no other specific customization options, but the grip is available only in black.
Pros and Cons of Strike Industries Overmolded Enhanced Pistol Grip
Pros
- Enhanced grip texture due to the rubberized overmolding.
- Improved ergonomics with a more comfortable 15-degree grip angle.
- Durable and lightweight polymer construction.
- Easy drop-in installation with included hardware.
- Convenient storage compartment.
Cons
- Storage compartment is not waterproof.
- Only available in black.
Who Should Buy Strike Industries Overmolded Enhanced Pistol Grip?
The Strike Industries Overmolded Enhanced Pistol Grip is perfect for CZ Scorpion EVO and 3+ owners who find the factory grip uncomfortable or lacking in texture. It’s ideal for shooters who prioritize improved ergonomics and enhanced control. It benefits competitive shooters, recreational shooters, and anyone using the Scorpion for home defense or tactical purposes.
Those who are completely satisfied with the factory grip or prioritize waterproof storage should skip this product. If you have exceptionally small hands, the slightly larger profile might not be ideal. A must-have accessory to complement this grip is the Strike Industries Selector Switch for CZ Scorpion EVO.
Conclusion on Strike Industries Overmolded Enhanced Pistol Grip
The Strike Industries Overmolded Enhanced Pistol Grip is a significant upgrade for the CZ Scorpion EVO platform. The value proposition is excellent. The price is justified by the noticeable improvement in comfort, control, and overall shooting experience.
I would personally highly recommend the Strike Industries Overmolded Enhanced Pistol Grip. It addresses the shortcomings of the factory grip. It provides a superior feel and enhanced handling. If you’re looking to improve the ergonomics of your CZ Scorpion, this grip is a must-have.