The Strike Industries Magazine Pocket Clip Stainless Steel Black for SI EMP Mag Extension Left Hand Made a Bold First Impression
As a seasoned tactical gear specialist, I’ve seen countless magazine carriers and retention methods. The Strike Industries Magazine Pocket Clip Stainless Steel Black for SI EMP Mag Extension Left Hand immediately caught my eye with its minimalist design and promise of a secure, discreet carry solution. I was particularly interested in its compatibility with Strike Industries Extended Magazine Plates (EMP), aiming for a streamlined setup on my Glock 19 magazines.
I’d grown tired of bulky mag pouches that added unnecessary weight and complexity to my EDC. My need for a low-profile, easily accessible spare magazine was the driving force behind this purchase. Upon unboxing, the clip’s robust stainless steel construction and clean, matte black finish spoke volumes about its potential durability.
It felt noticeably sturdier than some of the polymer clips I’d experimented with previously, like the generic polymer mag clips that are prone to cracking under stress. I also considered the Neomag, known for its strong magnet, but the Strike Industries option seemed more secure and less likely to snag on other gear due to its clipped design. My initial impression was one of cautious optimism; its simplicity was either a stroke of genius or a potential point of failure. I was eager to put it through its paces.
Real-World Testing: Putting Strike Industries Magazine Pocket Clip Stainless Steel Black for SI EMP Mag Extension Left Hand to the Test
First Use Experience
I tested the Strike Industries Magazine Pocket Clip Stainless Steel Black for SI EMP Mag Extension Left Hand primarily at the shooting range during several training sessions. I incorporated it into my EDC setup, clipping a spare magazine in my support-side pocket. The initial draw felt surprisingly natural, offering a consistent grip on the magazine.
I practiced reloads in various scenarios, including prone, kneeling, and under simulated stress. During a particularly humid range day, I was concerned about the grip, but the Strike Industries clip maintained a secure hold. No slippage or fumbling occurred.
The first few draws felt a little stiff, requiring more force than I anticipated to release the magazine. However, after a few dozen repetitions, the clip began to “break in,” offering a smoother and more consistent release.
Extended Use & Reliability
After three months of consistent use, the Strike Industries Magazine Pocket Clip Stainless Steel Black for SI EMP Mag Extension Left Hand has proven to be impressively durable. There are no signs of bending, cracking, or loosening of the clip. The matte black finish exhibits minimal wear, primarily around the edges where it contacts my pocket.
Cleaning is straightforward; I simply wipe it down with a CLP-soaked rag after each range session. Its resistance to sweat and minor abrasions is commendable. Compared to other pocket clips I’ve used in the past, the Strike Industries clip offers significantly better retention and durability. It consistently outperformed a magnetic clip I previously used, which was prone to losing magazines during strenuous activity.
Breaking Down the Features of Strike Industries Magazine Pocket Clip Stainless Steel Black for SI EMP Mag Extension Left Hand
Specifications
- Material: SUS630 Stainless Steel – The SUS630 stainless steel provides exceptional strength and corrosion resistance, ensuring the clip can withstand harsh conditions and prolonged use.
- Finish: Matte Black – The matte black finish reduces glare and provides a low-profile appearance, making it ideal for concealed carry.
- Compatibility: Strike Industries EMP (Extended Magazine Plate) – Designed specifically for use with Strike Industries EMPs, ensuring a secure and reliable attachment.
- Hand Orientation: Left Hand – The clip is designed for left-handed users or those who prefer bullet-facing-forward carry on their support side.
- Function: Magazine Pocket Clip – Provides a convenient and discreet method for carrying spare pistol magazines.
Performance & Functionality
The Strike Industries Magazine Pocket Clip Stainless Steel Black for SI EMP Mag Extension Left Hand performs its core function admirably. It provides a secure and easily accessible method for carrying a spare pistol magazine. The clip offers excellent retention, ensuring the magazine remains securely in place even during vigorous activity.
Its low-profile design minimizes printing and snagging, making it ideal for concealed carry. While the initial draw can be a bit stiff, it quickly smooths out with use, offering a consistent and reliable release. The only area for potential improvement would be a slightly refined clip angle to further reduce snagging, but overall, its functionality is impressive.
Design & Ergonomics
The clip’s minimalist design is both aesthetically pleasing and highly functional. The SUS630 stainless steel construction offers exceptional durability without adding excessive weight. The matte black finish provides a low-profile appearance and enhances grip.
The Strike Industries Magazine Pocket Clip Stainless Steel Black for SI EMP Mag Extension Left Hand is relatively user-friendly, requiring minimal setup beyond attaching it to a compatible Strike Industries EMP. The learning curve is minimal, and the clip quickly becomes second nature in your EDC setup.
Durability & Maintenance
The Strike Industries Magazine Pocket Clip Stainless Steel Black for SI EMP Mag Extension Left Hand is built to last. The SUS630 stainless steel construction ensures it can withstand significant stress and abuse without bending or breaking. The matte black finish is resistant to scratches and corrosion, maintaining its appearance over time.
Maintenance is incredibly simple, requiring only occasional cleaning with a CLP-soaked rag. Its robust construction and corrosion-resistant finish ensure it will provide years of reliable service with minimal upkeep.
Accessories and Customization Options
The Strike Industries Magazine Pocket Clip Stainless Steel Black for SI EMP Mag Extension Left Hand is designed to work exclusively with Strike Industries EMPs (Extended Magazine Plates). This limits customization options. However, the modularity of the Strike Industries ecosystem allows for various EMP designs.
There are no direct accessories for the clip itself, but users can choose different EMP designs to tailor the overall profile and grip of their magazines. The lack of universal compatibility with other magazine extensions is a drawback, but the secure and reliable attachment with Strike Industries EMPs is a significant advantage.
Pros and Cons of Strike Industries Magazine Pocket Clip Stainless Steel Black for SI EMP Mag Extension Left Hand
Pros
- Secure Retention: The clip provides excellent retention, ensuring magazines stay in place during vigorous activity.
- Low-Profile Design: Its minimalist design minimizes printing and snagging, ideal for concealed carry.
- Durable Construction: Made from SUS630 stainless steel for exceptional strength and corrosion resistance.
- Easy Maintenance: Simple cleaning with a CLP-soaked rag keeps it in top condition.
- Left-Hand Specific: Designed for comfortable left-handed use or bullet-forward carry.
Cons
- EMP Dependence: Only compatible with Strike Industries EMPs, limiting universal compatibility.
- Initial Stiffness: The draw can be slightly stiff when new, requiring a break-in period.
Who Should Buy Strike Industries Magazine Pocket Clip Stainless Steel Black for SI EMP Mag Extension Left Hand?
The Strike Industries Magazine Pocket Clip Stainless Steel Black for SI EMP Mag Extension Left Hand is perfect for: **Left-handed shooters, concealed carry enthusiasts using Glocks with *Strike Industries* EMPs, tactical professionals, and anyone seeking a minimalist and reliable magazine carry solution.** Those prioritizing ease of access and retention will find this clip a valuable addition to their gear.
Those who should skip this product include: Users who don’t use Strike Industries EMPs, prefer universal compatibility, or need a clip that works with various magazine extensions. People looking for immediate, out-of-the-box smoothness without any break-in period might also want to consider other options.
Must-have accessories or modifications: Strike Industries EMPs (Extended Magazine Plates) are essential, as the clip is specifically designed to work with them.
Conclusion on Strike Industries Magazine Pocket Clip Stainless Steel Black for SI EMP Mag Extension Left Hand
The Strike Industries Magazine Pocket Clip Stainless Steel Black for SI EMP Mag Extension Left Hand offers a secure, low-profile, and durable solution for carrying spare magazines. Its reliance on Strike Industries EMPs is a limitation. However, the exceptional retention and robust stainless steel construction are compelling advantages.
At $7.49, the price is justified for the level of quality and functionality offered. I would personally recommend it to anyone using Strike Industries EMPs and seeking a minimalist concealed carry solution. It represents a smart, reliable, and affordable upgrade to any tactical or EDC setup. Go ahead and clip one on; you might just find it becomes an indispensable part of your everyday carry!