Strike Industries King Comp 308 Win,7.62x51mm NATO 5/8″-24 tpi 2.62″ Black Steel Review

First Thoughts on the Strike Industries King Comp 308 Win,7.62x51mm NATO 5/8″-24 tpi 2.62″ Black Steel

Muzzle control on a .308 rifle can be a serious challenge. Recoil mitigation is essential for follow-up shots and overall accuracy, especially in dynamic shooting situations. That’s why, when I stumbled upon the Strike Industries King Comp 308 Win,7.62x51mm NATO 5/8″-24 tpi 2.62″ Black Steel, my interest was immediately piqued.

I’ve been working with tactical rifles for over a decade, and the Strike Industries name carries weight; they’re known for innovative designs at reasonable prices. I needed a compensator that could tame the beast of my AR-10 platform without breaking the bank or adding excessive length. I wanted something compact, effective, and robust enough to withstand the rigors of regular range sessions and potential use in practical rifle competitions.

Upon unboxing, the King Comp felt solid and well-made. The black steel finish was even and looked durable, and the machining appeared precise. It’s a compact unit, definitely shorter than some of the other muzzle devices I’ve used, which I appreciated.

I was initially considering the VG6 Precision Gamma 762 and the SureFire ProComp 762, both popular options for recoil reduction. However, the King Comp won me over with its aggressive design and significantly lower price point. I was hoping to get similar performance for a fraction of the cost. My initial impression was cautiously optimistic; it certainly looked the part.

Real-World Testing: Putting Strike Industries King Comp 308 Win,7.62x51mm NATO 5/8″-24 tpi 2.62″ Black Steel to the Test

First Use Experience

I took the Strike Industries King Comp to my local shooting range, mounted on my AR-10 chambered in .308 Winchester. I set up targets at 50 and 100 yards to get a feel for its performance. The first few shots were immediately noticeable; the recoil was significantly reduced compared to the standard A2 flash hider I had been using.

I tested the rifle in moderately windy conditions, and the King Comp seemed to contribute to better stability. The muzzle rise was minimized, allowing for quicker target re-acquisition after each shot. There were no immediate issues; installation was simple, and the compensator functioned as advertised right out of the box.

Extended Use & Reliability

After several range sessions spanning a few months, the Strike Industries King Comp has proven to be remarkably durable. I’ve put several hundred rounds through the rifle with the compensator attached. There are no signs of excessive wear or loosening of the threads.

Cleaning is straightforward; a quick scrub with a bore brush and some solvent removes any carbon buildup. Compared to my previous experiences with more complicated muzzle brakes, the King Comp is a breeze to maintain. It definitely outperforms the standard A2 flash hider in recoil reduction, though it might not be quite as effective as some of the higher-end (and higher-priced) options on the market.

Breaking Down the Features of Strike Industries King Comp 308 Win,7.62x51mm NATO 5/8″-24 tpi 2.62″ Black Steel

Specifications

The Strike Industries King Comp 308 Win,7.62x51mm NATO 5/8″-24 tpi 2.62″ Black Steel is designed specifically for .308 Winchester and 7.62x51mm NATO calibers. It utilizes a 5/8″-24 tpi thread pattern, making it compatible with most AR-10 platforms. The overall length is 2.62 inches, adding minimal length to the rifle.

The compensator is constructed from steel with a black finish. This contributes to its durability and resistance to corrosion. These specifications are important because they directly impact the compensator’s effectiveness in mitigating recoil and its ability to withstand the high pressures and temperatures generated by the .308 cartridge.

Performance & Functionality

The King Comp’s primary function is to reduce felt recoil and muzzle rise. The dual chamber design effectively redirects propellant gases upward and to the sides. This counteracts the natural tendency of the muzzle to climb during firing.

While it doesn’t eliminate recoil entirely, it makes a noticeable difference, allowing for faster follow-up shots and improved accuracy. The angled gas ports are designed to reduce side concussion, which is a significant benefit for shooters and those nearby. Its performance exceeded my initial expectations for a compensator in this price range, although some premium brakes offer slightly better recoil reduction.

Design & Ergonomics

The Strike Industries King Comp features a relatively compact and aggressive design. The steel construction gives it a solid and robust feel. The black finish is aesthetically pleasing and blends well with most AR-10 builds.

Installation is simple, requiring only a wrench and a crush washer or shims (not included). There isn’t much of a learning curve; anyone familiar with installing muzzle devices can easily install the King Comp.

Durability & Maintenance

The steel construction and durable finish suggest that the Strike Industries King Comp should last for many years with proper care. Regular cleaning to remove carbon buildup is essential for maintaining optimal performance. The simple design makes disassembly and cleaning relatively easy.

Accessories and Customization Options

The Strike Industries King Comp doesn’t come with any specific accessories. However, it’s compatible with any AR-10 platform with a standard 5/8″-24 tpi threaded barrel. You can further enhance your rifle with various aftermarket accessories such as different handguards, optics, and stocks to complement the compensator.

Pros and Cons of Strike Industries King Comp 308 Win,7.62x51mm NATO 5/8″-24 tpi 2.62″ Black Steel

Pros

  • Significantly reduces felt recoil and muzzle rise.
  • Durable steel construction with a black finish.
  • Relatively compact design adds minimal length.
  • Aggressive aesthetics enhance the rifle’s appearance.
  • Very affordable compared to other compensators on the market.

Cons

  • Does not include a crush washer or shims for installation.
  • Flash suppression is minimal compared to dedicated flash hiders.


Who Should Buy Strike Industries King Comp 308 Win,7.62x51mm NATO 5/8″-24 tpi 2.62″ Black Steel?

The Strike Industries King Comp 308 Win,7.62x51mm NATO 5/8″-24 tpi 2.62″ Black Steel is perfect for shooters looking for an affordable and effective recoil reduction solution for their .308 AR-10 platform. It’s also a good choice for those who want to maintain a compact rifle length. It is also suitable for practical rifle competitors on a budget.

Those prioritizing maximum flash suppression or willing to spend significantly more for marginal gains in recoil reduction should skip this product. A must-have accessory is a set of shims or a crush washer for proper installation and timing.

Conclusion on Strike Industries King Comp 308 Win,7.62x51mm NATO 5/8″-24 tpi 2.62″ Black Steel

The Strike Industries King Comp 308 Win,7.62x51mm NATO 5/8″-24 tpi 2.62″ Black Steel is an excellent value proposition. It delivers a significant improvement in recoil management without breaking the bank. At a price point of $39.95, the value is undeniable.

I would personally recommend it to anyone looking for an affordable and effective compensator for their .308 AR-10. If you’re tired of wrestling with the recoil of your .308, give the King Comp a try – you won’t be disappointed!


Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top