First Impressions of Strike Industries Enhanced Grip Module for the SIG P365
The Strike Industries Enhanced Grip Module for the SIG P365 promises a significant upgrade to an already excellent concealed carry pistol. Strike Industries aims to improve ergonomics, recoil management, and accessory options for the P365, a pistol often criticized for its somewhat basic grip. As someone always seeking optimal performance and comfort from my firearms, this product immediately caught my attention.
I had been searching for a way to improve the ergonomics of my P365. The factory grip, while functional, felt a little too small and slick, especially during extended range sessions or in adverse weather. Aftermarket grip modules seemed like the ideal solution, and the Strike Industries offering stood out due to its aggressive texturing, integrated magwell, and accessory rail. I was curious if it could truly transform the feel and handling of my P365.
Upon unboxing, the Strike Industries Enhanced Grip Module immediately felt more substantial than the factory grip. The aggressively textured surfaces promised a secure hold, and the molded stippling looked fantastic straight from the factory. Comparing it to the factory grip and a Wilson Combat grip module I’ve used in the past, the Strike Industries module seemed to strike a balance between aggressive grip and comfortable ergonomics. It appeared more refined and feature-rich than the factory grip, while offering a potentially more secure hold than the Wilson Combat.
My initial impression was overwhelmingly positive. I was excited to install it on my P365 and see if it lived up to its promises of improved grip and recoil control. The built-in flared magwell and picatinny rail were welcome additions, suggesting a thoughtful design focused on both performance and practicality.
Real-World Testing: Putting Strike Industries Enhanced Grip Module for the SIG P365 to the Test
First Use Experience
I tested the Strike Industries Enhanced Grip Module at my local outdoor shooting range. The weather was slightly damp, providing a good test of the grip texture in less-than-ideal conditions. Installation was straightforward, with the FCU dropping into the module with minimal effort.
The enhanced grip was immediately noticeable. The aggressive texturing provided a secure and confident hold, even with slightly sweaty hands. I found that the “Dynamic Control” gas pedal area helped with recoil management. I noticed that the undercut beneath the trigger guard allowed for a higher grip, further enhancing control. There were no immediate issues, and the enhanced ergonomics made the P365 feel like a completely different pistol.
Extended Use & Reliability
After several weeks of regular use, the Strike Industries Enhanced Grip Module has proven to be a worthwhile upgrade. There are no signs of significant wear and tear. The grip texture remains aggressive and effective. Cleaning is simple, as the polymer material resists dirt and grime, and a quick wipe-down is all that’s needed.
The Strike Industries grip has outperformed my expectations. It offers a significant improvement in handling and control compared to the factory grip. In my experience, it allows for faster follow-up shots and improved accuracy, particularly during rapid firing drills.
Breaking Down the Features of Strike Industries Enhanced Grip Module for the SIG P365
Specifications
- Manufacturer: Strike Industries
- Gun Make: SIG Sauer
- Gun Model: SIG Sauer P365
- Gun Type: Pistol
- The grip module works with all P365 FCUs, including manual safety versions (some minor fitting may be required).
- The design features an increased palm swell, undercut for the middle finger, and texturing on all sides. These features significantly enhance the ergonomics and comfort of the grip.
- Dynamic Control (Gas Pedal): Small gas pedal areas on both sides of the grip provide improved recoil management. This feature is similar to aftermarket Glock frame modifications, providing a stable platform for the support hand.
- Picatinny Rail: Includes two picatinny rail slots for attaching weapon lights or lasers. This allows for easy mounting of accessories, expanding the pistol’s utility.
- Built-in Flared Magwell: Enhances the speed and ease of magazine reloads. The flared magwell does not significantly increase printing during concealed carry.
- Magazine Compatibility: Compatible with P365 X/XL 10, 12, 15, and 17-round magazines. This allows for flexibility in magazine choice, depending on the user’s needs and preferences.
- The grip module includes the Strike Industries Mag Release for the P365.
Performance & Functionality
The Strike Industries Enhanced Grip Module dramatically improves the P365’s handling and shootability. The enhanced grip texture ensures a secure hold. The Dynamic Control gas pedal provides a stable platform for recoil management.
The flared magwell facilitates faster and smoother reloads. The picatinny rail enables the attachment of weapon lights and lasers, making the P365 more versatile in low-light conditions. The fit and finish are excellent, and the module feels like a premium upgrade. The only potential area for improvement is the degree of fitting sometimes required for manual safety FCUs.
Design & Ergonomics
The Strike Industries Enhanced Grip Module is well-designed and ergonomically sound. The material feels robust and durable. The increased palm swell and undercut for the middle finger provide a comfortable and natural grip.
The aggressive texture ensures a secure hold without being overly abrasive. The built-in flared magwell is well-integrated and does not significantly increase the overall size of the pistol. The overall design is a significant improvement over the factory grip.
Durability & Maintenance
The Strike Industries Enhanced Grip Module is constructed from durable polymer. This ensures it can withstand the rigors of daily carry and frequent use. The material is resistant to scratches, abrasions, and chemicals.
Maintenance is straightforward, requiring only occasional cleaning with a mild solvent. The robust construction suggests that the grip module will last for years with proper care.
Accessories and Customization Options
The Strike Industries Enhanced Grip Module includes the Strike Industries Mag Release for the P365. The integrated picatinny rail allows for the attachment of various weapon lights and lasers. The grip is compatible with all P365 X/XL magazines, offering flexibility in magazine capacity.
While the grip module itself doesn’t offer extensive customization options beyond accessories, its improved ergonomics and handling characteristics enhance the overall shooting experience. This makes it a valuable upgrade for any P365 owner.
Pros and Cons of Strike Industries Enhanced Grip Module for the SIG P365
Pros
- Significantly improved ergonomics compared to the factory grip.
- Aggressive texturing provides a secure and confident hold.
- Built-in flared magwell facilitates faster reloads.
- Integrated picatinny rail for weapon light or laser.
- Dynamic Control gas pedal enhances recoil management.
Cons
- Some fitting may be required for manual safety FCUs.
- May require new holsters due to the accessory rail and slightly larger overall dimensions.
Who Should Buy Strike Industries Enhanced Grip Module for the SIG P365?
The Strike Industries Enhanced Grip Module is perfect for P365 owners who want to improve the ergonomics and handling of their pistol. It’s ideal for concealed carriers, competition shooters, and anyone who appreciates a more secure and comfortable grip. Anyone wanting to add a light or laser to their P365 should also consider this a must-have upgrade.
Those who should skip this product might include individuals who are perfectly satisfied with the factory grip and do not require additional features or enhanced ergonomics. Also, those unwilling to invest in new holsters to accommodate the accessory rail or slightly larger grip may want to explore other options.
A must-have accessory would be a high-quality weapon light or laser to take advantage of the integrated picatinny rail. A quality IWB or OWB holster that can accommodate the modified grip dimensions is also essential for comfortable and secure carry.
Conclusion on Strike Industries Enhanced Grip Module for the SIG P365
The Strike Industries Enhanced Grip Module for the SIG P365 is a worthwhile upgrade that delivers on its promises of improved ergonomics, handling, and accessory options. Its aggressive texturing, integrated magwell, and Dynamic Control gas pedal make it a significant improvement over the factory grip. The Strike Industries Enhanced Grip Module gives P365 owners better control, and potentially better recoil management.
The price is justified, given the enhanced performance and features. I would personally recommend it to any P365 owner looking to elevate their shooting experience. If you are looking to transform your P365 into a more capable and comfortable firearm, the Strike Industries Enhanced Grip Module is an excellent choice.