First Thoughts on the Strike Adjustable Scope Mount 4-Position 30mm-1″ Black Anodized
Optics are crucial, and mounting them correctly is even more so. After a decade in the outdoor and tactical gear world, I’ve seen countless scopes rendered useless by subpar mounts. The Strike Adjustable Scope Mount 4-Position 30mm-1″ Black Anodized from Strike Industries immediately caught my eye with its promise of adjustable eye relief, something often overlooked until you’re contorting your neck to get a proper sight picture.
My current AR build was suffering from a frustratingly short eye relief with my preferred optic. Traditional cantilever mounts were either too far forward or too far back, leaving me in an awkward shooting position. I was hoping this mount could be the key to finally dialing in the perfect fit.
Unboxing the Strike Adjustable Scope Mount 4-Position 30mm-1″ Black Anodized revealed a robust, cleanly machined piece of hardware. The black anodized finish looked durable, and the four distinct mounting positions were clearly defined. It felt substantial without being overly heavy, a crucial balance for any rifle build.
I’ve used similar cantilever mounts from Leupold and Nightforce, but their fixed positions always forced me to compromise. The Strike Industries mount’s adjustability was the deciding factor for me. Initial impressions were positive; I was excited to see if it could live up to its promise.
Real-World Testing: Putting Strike Adjustable Scope Mount 4-Position 30mm-1″ Black Anodized to the Test
First Use Experience
I tested the Strike Adjustable Scope Mount 4-Position 30mm-1″ Black Anodized at my local range, mounting it on my AR-15 chambered in .223 Wylde. The weather was a typical range day: sunny, with a slight breeze. I wanted to test the mount’s ability to hold zero across the four different positions.
Adjusting the mount was straightforward, requiring only a few minutes to swap between positions using the included hardware. The difference in eye relief was immediately noticeable, and I quickly found the “Intermediate Extended” position to be the most comfortable for my shooting stance. The mount felt secure on the Picatinny rail, instilling confidence.
Extended Use & Reliability
After several weeks of range trips and approximately 500 rounds fired, the Strike Adjustable Scope Mount 4-Position 30mm-1″ Black Anodized has held up remarkably well. There are no signs of loosening or shifting, and it continues to hold zero consistently. Cleaning is simple, requiring only a quick wipe-down after each range session.
The black anodized finish has proven to be scratch-resistant, showing no significant wear despite repeated handling. I’ve found it superior to some cheaper mounts I’ve used in the past, where the finish would easily chip or fade. It outperforms my previous Aero Precision mount in terms of adjustability and my old UTG mount in overall durability.
Breaking Down the Features of Strike Adjustable Scope Mount 4-Position 30mm-1″ Black Anodized
Specifications
The Strike Adjustable Scope Mount 4-Position 30mm-1″ Black Anodized is CNC machined from 7250 aluminum, a material known for its lightweight and high-strength properties. It is hard anodized in black, providing a durable and corrosion-resistant finish. The mount accommodates both 30mm and 1-inch scope tubes, offering versatility for different optic setups.
This mount’s key feature is its four adjustable positions: Standard, Extended, Intermediate Extended, and Hyper Extended. These positions allow for fine-tuning of eye relief to accommodate various shooting styles and body types. Its cantilever design is intended for use with Picatinny rail section rifles. The adjustability ensures comfortable and consistent shooting, particularly with varying equipment or when accommodating different shooters.
Performance & Functionality
The Strike Adjustable Scope Mount 4-Position 30mm-1″ Black Anodized performs exceptionally well, delivering on its promise of adjustable eye relief. Its precise machining ensures a secure and repeatable zero, even after switching between positions. The adjustments are easy to make, and the mount feels solid and dependable.
The mount’s strength lies in its adaptability, allowing users to customize their scope position to their specific needs. One minor drawback is the need for proper torque settings during installation to ensure optimal performance. It definitely meets my expectations, providing a more customizable and comfortable shooting experience than fixed-position mounts.
Design & Ergonomics
The Strike Adjustable Scope Mount 4-Position 30mm-1″ Black Anodized boasts a sleek and functional design. The 7250 aluminum construction keeps the weight down while providing exceptional strength. The finish is smooth and even, and the mount feels comfortable to handle.
Its user-friendliness is a major selling point. The adjustment process is intuitive, and the mount secures easily to any Picatinny rail. There is a minimal learning curve, even for novice shooters.
Durability & Maintenance
The Strike Adjustable Scope Mount 4-Position 30mm-1″ Black Anodized is built to last. The high-quality aluminum and durable finish ensure longevity, even under harsh conditions. Maintenance is simple; regular cleaning with a soft cloth and mild solvent is all that is needed to keep it in top condition.
Given its robust construction, it should withstand years of use without issue. Spare parts are readily available from Strike Industries, further extending its lifespan.
Accessories and Customization Options
The Strike Adjustable Scope Mount 4-Position 30mm-1″ Black Anodized does not come with many accessories beyond the necessary mounting hardware. However, its compatibility with standard Picatinny rails opens up a wide range of customization options. Users can pair it with various scopes from brands like Vortex, Trijicon, and Leupold.
The mount’s adjustability also allows for fine-tuning with cheek risers and other stock accessories to achieve the perfect shooting position.
Pros and Cons of Strike Adjustable Scope Mount 4-Position 30mm-1″ Black Anodized
Pros
- Highly Adjustable: The four distinct positions allow for precise eye relief customization.
- Durable Construction: CNC machined from 7250 aluminum with a hard anodized finish.
- Lightweight Design: Adds minimal weight to the rifle while maintaining strength.
- Easy Installation: Straightforward mounting process with included hardware.
- Versatile Compatibility: Works with both 30mm and 1-inch scope tubes.
Cons
- Requires proper torque settings for optimal performance.
- Higher price point compared to basic fixed mounts.
Who Should Buy Strike Adjustable Scope Mount 4-Position 30mm-1″ Black Anodized?
The Strike Adjustable Scope Mount 4-Position 30mm-1″ Black Anodized is perfect for shooters who value adjustability and customization. It’s ideal for AR platform enthusiasts, competitive shooters, and hunters who require precise eye relief for optimal accuracy and comfort.
Those on a very tight budget or who don’t require adjustable eye relief may find a simpler, fixed mount sufficient. Shooters with limited experience should ensure they understand proper torque settings for secure installation.
Must-have accessories include a torque wrench for proper mounting, a high-quality scope matched to the rifle’s intended use, and potentially a cheek riser to optimize the shooting position.
Conclusion on Strike Adjustable Scope Mount 4-Position 30mm-1″ Black Anodized
The Strike Adjustable Scope Mount 4-Position 30mm-1″ Black Anodized is a worthwhile investment for anyone seeking a customizable and durable scope mounting solution. Its adjustability addresses a common problem in rifle setups, allowing for a comfortable and consistent shooting experience.
At $125.49, the price is justified by its build quality, versatility, and performance. I would personally recommend it to anyone looking to optimize their AR platform or other Picatinny rail rifle setup.
Upgrade your shooting experience with the Strike Adjustable Scope Mount 4-Position 30mm-1″ Black Anodized. Your eyes will thank you.