SME Sight-Rite Laser Bore Sighting System 9mm Brass Review

The SME Sight-Rite Laser Bore Sighting System 9mm Brass Made a Bold First Impression

The SME Sight-Rite Laser Bore Sighting System 9mm Brass, from SME, promises meticulous accuracy and ease of use in bore sighting 9mm firearms. Marketed as a precision-machined, caliber-specific sighter with a high-output laser, it aims to simplify the initial zeroing process, saving both time and ammunition. The promise of exacting tolerance specifications certainly piqued my interest, as I’ve always valued reliable and efficient tools for firearm maintenance.

I was looking for a quick and easy way to rough-sight my new pistol, especially since range time is valuable. I’d been relying on traditional methods, which can be time-consuming and sometimes inaccurate, leading to wasted rounds. The SME Sight-Rite Laser Bore Sighting System 9mm Brass seemed like a promising alternative.

Upon unboxing, the initial impression was…underwhelming. The brass casing felt lighter than expected, and the laser aperture looked somewhat small. Compared to a more robust, universal bore sighter I’ve used in the past, the SME Sight-Rite Laser Bore Sighting System 9mm Brass felt less substantial. I also considered a magnetic bore sighter but chose this one, hoping the caliber-specific design would provide better accuracy.

My first impression was one of cautious optimism quickly turning to disappointment. The lightweight construction raised concerns about durability, and a quick test of the laser’s visibility in daylight revealed it was far from the “high output” I was expecting. The low price point should have been a red flag.

Real-World Testing: Putting SME Sight-Rite Laser Bore Sighting System 9mm Brass to the Test

First Use Experience

My initial test took place at an indoor shooting range at a distance of 10 yards. The lighting was adequate, and the conditions were controlled. Inserting the SME Sight-Rite Laser Bore Sighting System 9mm Brass into the chamber was straightforward, but immediately the laser projected a dot significantly high and to the right of my sights.

The advertised accuracy simply wasn’t there. Adjusting my sights to align with the laser at 10 yards resulted in rounds impacting far off target once I started shooting live ammunition. Furthermore, the laser’s brightness diminished noticeably after only a few minutes of use.

Extended Use & Reliability

After several attempts over the course of a week, using fresh batteries each time, the results were consistently poor. The SME Sight-Rite Laser Bore Sighting System 9mm Brass proved unreliable and inaccurate. After about 10 uses, the brass casing started to show signs of wear, with slight deformations around the battery compartment.

Cleaning was simple enough, but the internal components seemed fragile, making me hesitant to apply any significant pressure. Compared to my previous bore sighting experiences, the SME Sight-Rite Laser Bore Sighting System 9mm Brass performed far below expectations, proving to be a frustrating and ultimately useless tool. It underperformed significantly.

Breaking Down the Features of SME Sight-Rite Laser Bore Sighting System 9mm Brass

Specifications

• Caliber: 9mm. The SME Sight-Rite Laser Bore Sighting System 9mm Brass is designed specifically for 9mm caliber firearms.
• Material: Brass casing. The brass casing is intended to mimic a 9mm cartridge for proper chamber fit.
• Laser: High output laser. The “high output” claim is highly questionable based on my experience.
• Batteries: Three (3) button cell batteries included. The included batteries are a standard size but drain quickly.
• Precision Machined: Intended to have exacting tolerance specifications for accuracy. This is the biggest point of failure.

These specifications are crucial for effective bore sighting. A proper fit in the chamber and a bright, consistent laser are essential for accurate initial alignment. Unfortunately, the execution falls far short of the promise.

Performance & Functionality

The SME Sight-Rite Laser Bore Sighting System 9mm Brass utterly fails to perform its primary function: providing a reasonably accurate initial bore sighting. The laser projection is consistently off, and the laser’s rapid dimming renders it useless after a short period. It does not meet expectations.

The biggest weakness is accuracy. The product’s strengths are non-existent.

Design & Ergonomics

The brass casing is lightweight and easy to handle. However, the construction feels cheap, and the battery compartment is flimsy. There is no included on/off switch.

There is a slight learning curve to inserting and removing the device, but it is otherwise user-friendly. The build quality raises serious concerns about durability.

Durability & Maintenance

Based on my experience, the SME Sight-Rite Laser Bore Sighting System 9mm Brass is unlikely to last long. The fragile construction and rapid battery drain suggest a short lifespan. Maintenance is minimal, but the device’s inherent flaws make it hardly worth the effort.

This product will not last and would need frequent replacing. It is easy to maintain but requires frequent battery replacing.

Accessories and Customization Options

The SME Sight-Rite Laser Bore Sighting System 9mm Brass comes with no accessories beyond the included batteries. There are no customization options available or necessary for such a simple device. Its compatibility with other brands is irrelevant since it operates as a self-contained unit. There are no real ways to use the product outside of its intended single use.

Pros and Cons of SME Sight-Rite Laser Bore Sighting System 9mm Brass