First Impressions of SightMark .350 Legend In-Chamber Boresight w/ Red Laser
As a seasoned outdoor and tactical gear specialist, I’ve seen my share of gimmicks and gadgets promising pinpoint accuracy. Boresighting tools often fall into one of those categories, either being incredibly helpful or a complete waste of money. That’s why I approached the SightMark .350 Legend In-Chamber Boresight w/ Red Laser with a healthy dose of skepticism, coupled with a desire to see if it could truly deliver on its promise of getting me “on paper fast.”
What drew me to this specific boresight was the .350 Legend chambering. This cartridge has gained massive popularity for deer hunting in states where straight-walled cartridges are required, and ensuring your rifle is accurately sighted is paramount for ethical harvesting. I also wanted to test an in-chamber style boresighter versus a magnetic muzzle-mounted one.
Upon unboxing, the SightMark boresight felt solid, constructed of what appeared to be quality brass. The weight felt appropriate, giving me confidence that it wouldn’t easily deform during use. Compared to cheaper, universally-sized boresights I’ve tested, this one felt more purpose-built and precise. My initial excitement was tempered with the knowledge that performance is what truly matters, but the build quality was a promising start.
Was I excited? Yes, but cautiously so. Disappointed? Not at all. Surprised? The heft and construction did exceed my expectations given the modest price point of $39.99.
Real-World Testing: Putting SightMark .350 Legend In-Chamber Boresight w/ Red Laser to the Test
First Use Experience
My first test of the SightMark .350 Legend In-Chamber Boresight w/ Red Laser took place at my local range, prepping for the upcoming deer season. I used it with my Ruger American chambered in .350 Legend, mounted with a Vortex Crossfire II scope. The range was well-maintained, with covered shooting benches and targets at 25, 50, and 100 yards.
The conditions were mild, around 65 degrees Fahrenheit with a slight breeze. Inserting the boresight into the chamber was easy; it seated securely and the red laser was immediately visible on the target. I quickly adjusted my scope to align with the laser dot at 25 yards, and then moved to the 50-yard target. After making adjustments, my first three shots at 50 yards were within a 2-inch group of the bullseye. This far exceeded my expectations.
One minor issue I encountered was the on/off end cap. It felt a bit flimsy and I wondered how long it would last. However, its simplicity made operation straightforward and quick.
Extended Use & Reliability
After several weeks of using the SightMark .350 Legend In-Chamber Boresight w/ Red Laser, it continues to perform reliably. I’ve used it to boresight three different .350 Legend rifles, and each time it got me close to center without wasting excessive ammunition. I have also used it on multiple occasions to double check the zero on my rifle after transporting it to my hunting stand.
Durability seems to be holding up well, despite the initial concern about the on/off switch. I store the boresight in its provided carrying case when not in use, which likely contributes to its longevity. The brass construction shows no signs of wear or corrosion.
Maintaining the boresight is incredibly simple. A quick wipe with a clean cloth after each use is all that’s needed. Compared to my previous experiences with other boresighting methods (like visually aligning through the bore), the SightMark is significantly faster and more accurate, saving both time and ammunition.
Breaking Down the Features of SightMark .350 Legend In-Chamber Boresight w/ Red Laser
Specifications
The SightMark .350 Legend In-Chamber Boresight w/ Red Laser is specifically designed for firearms chambered in .350 Legend. The body is constructed of durable brass, providing a solid and reliable platform for the laser. It features a red laser for easy visibility.
The product includes batteries for immediate use and a carrying case for protection and convenient storage. These specifications matter because they ensure accurate alignment and protection for the device, which translates to faster and more accurate sighting. The brass construction guarantees longevity and resistance to corrosion.
Performance & Functionality
The SightMark .350 Legend In-Chamber Boresight w/ Red Laser excels at its primary function: getting your rifle close to zero quickly. It significantly reduces the amount of ammunition needed to achieve a proper zero. The bright red laser is easily visible, even in daylight conditions.
Its main strength is its simplicity and effectiveness. The on/off switch is intuitive, and the in-chamber design ensures proper alignment. The only area for potential improvement is the robustness of the on/off end cap, which could be made more durable. It definitely meets expectations for a product in its price range.
Design & Ergonomics
The brass construction gives the boresight a solid feel and ensures its durability. The weight is minimal, adding no noticeable bulk to your firearm. Inserting and removing the boresight from the chamber is effortless.
The design is user-friendly, requiring no specialized knowledge or tools. The SightMark .350 Legend In-Chamber Boresight w/ Red Laser is simple to use.
Durability & Maintenance
With proper care, this boresight should last for many years. The brass construction is resistant to corrosion and wear. Maintenance is minimal.
A quick wipe with a clean cloth after each use is sufficient to keep it in good working order. No repairs should be needed.
Accessories and Customization Options
The SightMark .350 Legend In-Chamber Boresight w/ Red Laser comes with the necessary batteries and a carrying case. There are no other customization options available, nor are they necessary for its intended function. Because this is a boresighting tool, it does not require any additional customization.
Pros and Cons of SightMark .350 Legend In-Chamber Boresight w/ Red Laser
Pros
- Highly accurate: Gets you on paper quickly, saving time and ammunition.
- Durable brass construction: Ensures longevity and resistance to corrosion.
- Easy to use: Simple on/off switch and intuitive in-chamber design.
- Cost-effective: Provides excellent value for the price.
- Convenient carrying case included: Protects the boresight during storage and transport.
Cons
- On/off end cap feels somewhat flimsy: Could be more robust.
- Limited to .350 Legend chambering: Not versatile for other calibers without purchasing additional boresights.
Who Should Buy SightMark .350 Legend In-Chamber Boresight w/ Red Laser?
This boresight is perfect for .350 Legend hunters looking to quickly and accurately sight in their rifles before hunting season. It’s also beneficial for range shooters who want to save time and ammunition. Anyone who owns a firearm chambered in .350 Legend and wants to ensure their scope is properly aligned will benefit from this product.
Those who should skip this product include individuals who own firearms in multiple calibers and prefer a universal boresighting solution. Also, if you are not comfortable with basic firearm safety and handling, you should seek instruction before using this product.
A must-have accessory is a reliable rifle rest or shooting platform to ensure stability during the boresighting process.
Conclusion on SightMark .350 Legend In-Chamber Boresight w/ Red Laser
The SightMark .350 Legend In-Chamber Boresight w/ Red Laser is a simple yet effective tool that delivers on its promise of getting you close to zero quickly and efficiently. Its durable brass construction, ease of use, and accurate alignment make it an excellent value for the price.
The price is definitely justified given the time and ammunition it saves. I would personally recommend this product to anyone who owns a firearm chambered in .350 Legend and wants to simplify the sighting-in process.
If you’re tired of wasting money on countless rounds of ammunition trying to get your rifle on paper, the SightMark .350 Legend In-Chamber Boresight w/ Red Laser is a worthy investment. Get yours today and spend more time shooting accurately and less time chasing your zero!