Savage 10 1″ High 1PC Mount Set Black Review

First Thoughts on the Savage 10 1″ High 1PC Mount Set Black

The Savage 10 1″ High 1PC Mount Set Black offers a seemingly straightforward solution for mounting optics to a Savage 10 rifle. It’s a one-piece design, promising ease of installation and potentially improved stability over multi-piece setups. As someone who’s spent over a decade setting up rifles for various tactical and hunting applications, I’m always interested in evaluating mounting solutions, especially those claiming to simplify the process without sacrificing reliability.

My interest in this particular mount arose from a recent build I was undertaking. I was customizing a Savage 10 for long-range target shooting and needed a rock-solid optic mount that wouldn’t break the bank. I’d been using a two-piece mount from another manufacturer, and while it functioned, I felt it introduced unnecessary potential points of failure. The one-piece design of the Savage 10 1″ High 1PC Mount Set Black intrigued me with its promise of increased rigidity.

Upon unboxing, the first thing I noticed was the finish. The black anodizing looked clean and evenly applied. The mount itself felt surprisingly light, though sturdy enough to handle the recoil of a .308 Winchester. Compared to the Leupold Mark 4 and Nightforce mounts I often use on premium builds, the Savage 10 1″ High 1PC Mount Set Black felt less substantial, but then again, it costs a fraction of the price. I chose this mount over similarly priced Weaver or UTG options because of its dedicated design for the Savage 10 platform and the potential for better alignment.

My initial impression was cautiously optimistic. It wasn’t love at first sight like some higher-end mounts, but I wasn’t immediately disappointed either. The price point certainly played a role in my expectations. I was eager to get it mounted and see how it performed on the range.

Real-World Testing: Putting Savage 10 1″ High 1PC Mount Set Black to the Test

First Use Experience

I tested the Savage 10 1″ High 1PC Mount Set Black at my local shooting range, mounting it on my Savage 10 chambered in .308 Winchester. The conditions were mildly humid with a slight breeze, typical for a late spring day. Mounting the scope was straightforward, requiring only a few minutes and a torque wrench to ensure proper screw tension. I experienced no issues aligning the mount with the receiver.

The 1″ high configuration provided ample clearance for my 50mm objective lens scope, a crucial factor in selecting this specific height. After zeroing the rifle at 100 yards, I proceeded to shoot several groups at varying distances up to 600 yards. The mount held zero surprisingly well during the initial session, despite the significant recoil of the .308. The ease of installation and the initial zero retention were definite positives.

Extended Use & Reliability

After several months of regular use, including multiple range sessions and a weekend hunting trip, the Savage 10 1″ High 1PC Mount Set Black has held up reasonably well. There are some minor signs of wear on the finish around the edges of the rings, but nothing that impacts its function. I did have to re-tighten the screws after about 200 rounds, a common occurrence with any optic mount, but since then, it has held steady.

Cleaning the mount is simple; a quick wipe down with a lightly oiled cloth is usually sufficient. I haven’t noticed any corrosion or rust, even after exposure to light rain during my hunting trip. Compared to my experience with cheaper, less reputable mounts that often shift zero or loosen screws constantly, the Savage 10 1″ High 1PC Mount Set Black has been a pleasant surprise. It may not be on par with premium mounts, but it certainly provides good value for the money.

Breaking Down the Features of Savage 10 1″ High 1PC Mount Set Black

Specifications

• One-piece design: This feature enhances rigidity and reduces the number of potential failure points compared to two-piece mounts. It simplifies installation and contributes to overall stability.
• 1″ Ring Diameter: Designed to accommodate scopes with a 1-inch tube diameter, which is a common standard. Ensures compatibility with a wide range of scopes.
• High Profile: The 1″ high profile provides ample clearance for scopes with larger objective lenses, preventing them from interfering with the rifle’s barrel. This is particularly important for long-range shooting applications.
• Black Anodized Finish: The black anodized finish provides a durable and corrosion-resistant coating. It helps protect the mount from the elements and reduces glare.
• Savage 10 Compatibility: Specifically designed for Savage 10 series rifles, ensuring a proper fit and alignment with the receiver. This is crucial for maintaining accuracy.

These specifications matter because they directly impact the mount’s performance and the user’s experience. The one-piece design contributes to stability and consistent zero retention. The 1″ high profile provides versatility in scope selection. The black anodized finish enhances durability. The dedicated Savage 10 compatibility ensures proper alignment and easy installation.

Performance & Functionality

The Savage 10 1″ High 1PC Mount Set Black performs its primary job – securely mounting an optic – reasonably well. It provides a stable platform for the scope, contributing to consistent accuracy, especially for a mount at this price point. Zero retention is adequate for typical hunting and target shooting scenarios.

However, there are some areas for potential improvement. The clamping force of the rings could be increased to provide even greater security for high-recoil applications. The finish, while durable, is prone to showing minor scratches and wear over time. Overall, the mount meets expectations for its price range but doesn’t exceed them.

Design & Ergonomics

The design of the Savage 10 1″ High 1PC Mount Set Black is simple and functional. The one-piece construction simplifies installation and contributes to its relatively light weight. The high profile provides ample scope clearance, which is essential for larger optics.

The mount is generally user-friendly, requiring minimal adjustments and offering a straightforward installation process. There is no significant learning curve associated with its use.

Durability & Maintenance

The Savage 10 1″ High 1PC Mount Set Black is reasonably durable for its price. The anodized finish provides adequate protection against corrosion and wear. With proper care and maintenance, it should last for several years of regular use.

Maintenance is straightforward, requiring only occasional cleaning and tightening of the screws. No specialized tools or procedures are necessary.

Accessories and Customization Options

The Savage 10 1″ High 1PC Mount Set Black doesn’t come with any additional accessories beyond the necessary mounting hardware. There are no specific customization options available for the mount itself.

However, it is compatible with any 1-inch tube diameter scope. Users can easily swap out scopes as needed, depending on their specific shooting requirements. It also works with standard scope levels and other common scope accessories.

Pros and Cons of Savage 10 1″ High 1PC Mount Set Black

Check Best Price HERE

Who Should Buy Savage 10 1″ High 1PC Mount Set Black?

• Perfect for: Hunters on a budget, recreational target shooters, and anyone looking for a simple and reliable scope mounting solution for their Savage 10 rifle. It is also suitable for new shooters who are building their first rifle and don’t want to invest in expensive mounting hardware.
• Who should skip this product? Serious long-range competitors or tactical shooters who demand the absolute highest level of precision and durability should invest in a premium mount from manufacturers like Nightforce, Spuhr, or Badger Ordnance. Those who prioritize aesthetics over functionality might also find the finish less appealing than higher-end options.
• Must-have accessories or modifications? A torque wrench is essential for properly installing the mount and preventing damage to the screws or scope. A bubble level is also highly recommended for ensuring proper scope alignment.

Conclusion on Savage 10 1″ High 1PC Mount Set Black

The Savage 10 1″ High 1PC Mount Set Black offers a solid and affordable option for mounting optics on a Savage 10 rifle. While it may not have all the bells and whistles of premium mounts, it provides a reliable and stable platform for most shooters. The one-piece design simplifies installation, and the high profile provides ample scope clearance.

The value proposition is excellent. For the price, you get a mount that performs its primary function adequately and is specifically designed for your rifle. It is a great choice for budget-conscious shooters and those who are new to the world of rifle optics.

I would personally recommend the Savage 10 1″ High 1PC Mount Set Black to anyone looking for a reliable and affordable scope mounting solution for their Savage 10. It’s not perfect, but it gets the job done without breaking the bank. If you are building a rifle on a budget or just need a reliable mount for your existing Savage 10, this is definitely worth considering. Go ahead and give it a try; you might be surprised at how well it performs.

Check Best Price HERE