Remington 700 SA 1″ High 1PC Mount Set Black Review

First Thoughts on the Remington 700 SA 1″ High 1PC Mount Set Black

The Remington 700 SA 1″ High 1PC Mount Set Black is a crucial piece of hardware for any serious marksman looking to squeeze every ounce of accuracy out of their rifle. Specifically designed for the legendary Remington 700 short action, this one-piece mount promises enhanced stability and a streamlined profile. The market is saturated with scope mounting options, but the allure of a dedicated, purpose-built mount from a trusted name like Remington is difficult to ignore, especially at its affordable price point.

I found myself looking for a more stable and reliable mounting solution after experiencing inconsistent zero shifts with a budget two-piece ring setup on my trusty Remington 700. I was looking for something robust enough to handle the recoil of heavier calibers without loosening or shifting over time. The promise of a one-piece design for increased rigidity was particularly appealing.

Unboxing the Remington 700 SA 1″ High 1PC Mount Set Black, I immediately noticed the solid, if somewhat unremarkable, construction. The black finish is even and seems durable enough to withstand some abuse. The weight is reasonable – heavy enough to suggest quality materials, but not so heavy as to unduly burden the rifle.

Compared to individual scope rings or even some two-piece bases, this one-piece mount appeared to offer a cleaner, more integrated aesthetic. I had considered a Leupold Mark 4 base and rings, known for their bombproof construction, but the cost was significantly higher. Also, a Weaver two-piece base was in consideration, but I wanted a single, unified platform for my optic.

Initially, I was cautiously optimistic. The design appeared sound and the price was right, but the proof would be in the performance. The hope was that this mount would deliver the stability and repeatable zero I was after, and I couldn’t wait to get it installed.

Real-World Testing: Putting Remington 700 SA 1″ High 1PC Mount Set Black to the Test

First Use Experience

My initial testing of the Remington 700 SA 1″ High 1PC Mount Set Black took place at my local shooting range, under sunny skies and mild temperatures. I mounted a Vortex Viper PST Gen II 3-15×44 scope to the mount and installed the entire setup on my Remington 700 SA chambered in .308 Winchester. The mounting process was relatively straightforward, requiring only basic tools and a bit of patience to ensure proper alignment and torque.

The first few shots were promising. The rifle felt solid and stable, and there was no noticeable movement or shifting of the scope. I ran through a series of accuracy drills at 100 yards, and the results were consistent. The reticle held steady, and the groups were tight.

One minor issue arose after about 20 rounds. The screws holding the scope rings to the base seemed to loosen slightly. A quick check and retightening with a torque wrench resolved the problem, but it was something to keep an eye on.

Extended Use & Reliability

After several months of regular use, the Remington 700 SA 1″ High 1PC Mount Set Black has proven to be a reliable, albeit not perfect, performer. I’ve used it in various weather conditions, including light rain and moderately dusty environments. The black finish has held up well, with no significant signs of wear or corrosion.

The mount has remained reasonably stable, although I still check the screws periodically to ensure they are properly torqued. I’ve put hundreds of rounds through my .308 since installing the mount, and it has maintained a respectable level of accuracy.

Cleaning and maintenance are simple. A quick wipe-down with a clean cloth is usually sufficient to remove any dirt or debris. I periodically apply a small amount of gun oil to the screws to prevent corrosion.

Compared to my previous two-piece setup, the Remington 700 SA 1″ High 1PC Mount Set Black offers a noticeable improvement in stability and consistency. However, it doesn’t quite reach the level of bombproof reliability that you might find with higher-end mounts. It provides good performance for the price.

Breaking Down the Features of Remington 700 SA 1″ High 1PC Mount Set Black

Specifications

• Compatibility: Designed specifically for Remington 700 short action rifles. This ensures a precise fit and optimal alignment with the receiver.
• Ring Diameter: 1 inch. This is the standard size for most traditional rifle scopes.
• Height: High profile. This provides ample clearance for scopes with larger objective lenses.
• Construction: One-piece design. This enhances stability and reduces the potential for movement or shifting.
• Material: Likely Aluminum. This provides a good balance of strength and weight.
• Finish: Black. This protects against corrosion and provides a non-reflective surface.

These specifications are important because they directly impact the stability and accuracy of your rifle setup. A proper fit and stable platform are essential for consistent performance. The one-piece construction is a key feature that minimizes the risk of misalignment or loosening.

Performance & Functionality

The Remington 700 SA 1″ High 1PC Mount Set Black performs its primary job reasonably well: securely attaching a scope to a Remington 700 short action rifle. The mount provides a stable platform for the optic, contributing to improved accuracy and consistency.

The strengths of this mount lie in its simplicity and affordability. It’s easy to install and offers a noticeable improvement over cheaper, less stable mounting solutions. A key weakness is the potential for screws to loosen over time, requiring periodic maintenance.

Overall, the Remington 700 SA 1″ High 1PC Mount Set Black meets expectations for a mount in its price range. It delivers acceptable performance and reliability for most recreational shooters and hunters.

Design & Ergonomics

The design of the Remington 700 SA 1″ High 1PC Mount Set Black is straightforward and functional. The materials appear to be of decent quality, although not exceptionally high-end. The weight is manageable and doesn’t significantly alter the overall balance of the rifle.

The mount is relatively user-friendly, requiring only basic tools and some familiarity with scope mounting procedures. A torque wrench is highly recommended to ensure proper tightening of the screws. There isn’t a significant learning curve, but proper installation is key to optimal performance.

Durability & Maintenance

The durability of the Remington 700 SA 1″ High 1PC Mount Set Black appears to be adequate for typical use. The black finish provides some protection against corrosion, but the aluminum construction is susceptible to scratches and dings. With proper care and maintenance, it should last for several years.

Maintenance is simple, requiring only occasional cleaning and tightening of the screws. Regular inspection is recommended to ensure that the mount remains securely attached to the rifle.

Accessories and Customization Options

The Remington 700 SA 1″ High 1PC Mount Set Black doesn’t come with any additional accessories beyond the necessary mounting screws. Customization options are limited, as it’s a fairly basic mount.

However, it is compatible with a wide range of 1-inch diameter rifle scopes from various brands. It also accepts standard scope rings designed for use with Weaver-style bases. Adding thread locker to the screws is a recommended modification for added security.

Pros and Cons of Remington 700 SA 1″ High 1PC Mount Set Black

Check Best Price HERE

Who Should Buy Remington 700 SA 1″ High 1PC Mount Set Black?

The Remington 700 SA 1″ High 1PC Mount Set Black is perfect for recreational shooters and hunters who are looking for an affordable and reliable scope mounting solution for their Remington 700 short action rifle. It’s a good choice for those who want to upgrade from a cheaper two-piece base setup without breaking the bank. It is also good for someone who wants to have a simple and direct mounting solution.

Those seeking the ultimate in precision and durability, such as competitive shooters or those using high-powered magnum calibers, should skip this product and invest in a higher-end mount from brands like Nightforce or Badger Ordnance. Also, if you don’t own a Remington 700 SA, this is not the correct mount.

A must-have accessory is a quality torque wrench to ensure proper tightening of the screws. Applying a thread locker like Loctite to the screws is also highly recommended to prevent loosening over time.

Conclusion on Remington 700 SA 1″ High 1PC Mount Set Black

The Remington 700 SA 1″ High 1PC Mount Set Black is a solid, if unspectacular, scope mounting option for Remington 700 short action rifles. It offers a good balance of stability, ease of use, and affordability. While it may not be the most robust or feature-rich mount on the market, it provides a noticeable improvement over cheaper alternatives and is perfectly adequate for most recreational shooting and hunting applications.

The price is certainly justified, especially for those on a budget. However, be prepared to perform regular maintenance to ensure that the screws remain properly torqued.

I would personally recommend the Remington 700 SA 1″ High 1PC Mount Set Black to anyone looking for a reliable and affordable scope mounting solution for their Remington 700 short action rifle. It’s a good value for the money and will likely provide years of dependable service. If you are looking to upgrade your setup, I suggest getting this mount.

Check Best Price HERE