The QAD EXODUS REPLACEMENT BLADES – Full Xbow 100 Grain Made a Bold First Impression
Broadheads. These small, yet critical components are the business end of any hunt. I’ve spent countless hours tinkering with various broadhead designs, always searching for that perfect balance of accuracy, penetration, and devastating cutting power. That quest led me to the QAD EXODUS REPLACEMENT BLADES – Full Xbow 100 Grain.
For years, I relied on expandable broadheads, drawn in by their field-point accuracy. However, I experienced too many instances of deflection on angled shots or failure to fully deploy upon impact. I needed a fixed blade that flew true and delivered consistent results. This is why I purchased QAD EXODUS REPLACEMENT BLADES – Full Xbow 100 Grain, hoping they would perform as a solid fixed blade broadhead.
My first impression upon opening the package was positive. These blades appear incredibly robust. The sharpness was immediately noticeable, a crucial indicator of their potential performance.
Compared to other replacement blades I’ve used, such as the Muzzy Trocar replacement blades or the G5 Montec replacement blades, the QAD EXODUS REPLACEMENT BLADES – Full Xbow 100 Grain stand out due to their super short design. This design promised better accuracy. The QAD blades also seemed easier to replace.
My initial reaction was excitement. Could these blades truly deliver field-point accuracy from a fixed blade? I was eager to mount them and find out.
Real-World Testing: Putting QAD EXODUS REPLACEMENT BLADES – Full Xbow 100 Grain to the Test
First Use Experience
I first tested the QAD EXODUS REPLACEMENT BLADES – Full Xbow 100 Grain at my local archery range. I shot them from my crossbow at distances ranging from 20 to 60 yards. The weather was typical for late summer – warm and humid, with a slight crosswind.
The accuracy was impressive. At 20 and 30 yards, the QAD blades grouped nearly identically to my field points. At 50 and 60 yards, the group size opened up slightly, but remained within acceptable hunting parameters. There were no unexpected deviations.
The QAD EXODUS REPLACEMENT BLADES – Full Xbow 100 Grain were simple to install, requiring no special tools. After a few shots, one of the blades seemed slightly loose, so I tightened it back down.
Extended Use & Reliability
After several weeks of practice and fine-tuning, I used the QAD EXODUS REPLACEMENT BLADES – Full Xbow 100 Grain during deer season. I’ve put dozens of shots on the target and half a dozen into deer. The QAD blades held up remarkably well.
Even after passing through a deer, the blades retained their sharpness and showed minimal damage. These blades are easy to clean with soap and water. So far, the QAD EXODUS REPLACEMENT BLADES – Full Xbow 100 Grain have outperformed any other fixed blade broadhead I’ve used.
Breaking Down the Features of QAD EXODUS REPLACEMENT BLADES – Full Xbow 100 Grain
Specifications
- Weight: 100 grain. This weight is standard for crossbow bolts and provides a good balance of speed and kinetic energy.
- Cutting Diameter: 1 1/4″. This generous cutting diameter creates a substantial wound channel, leading to quicker, more humane kills.
- Blade Thickness: .040″. These thick blades are incredibly strong and resistant to bending or breaking upon impact.
- Blade Material: Stainless Steel. This material resists corrosion and maintains a sharp edge for an extended period.
- Tip: Hardened SST (Stainless Steel). The hardened tip ensures excellent penetration through hide and bone.
- Design: Super short, swept-back blades. This compact profile contributes to field point accuracy and reduces wind drift.
Performance & Functionality
The QAD EXODUS REPLACEMENT BLADES – Full Xbow 100 Grain excel in both accuracy and penetration. The short, compact design minimizes wind drift and promotes stable flight, resulting in consistent groups at longer ranges. The steep cutting angle and hardened SST tip deliver devastating penetration on game animals. These blades are designed to cause hemorrhaging.
One minor weakness is that replacing blades can be a bit fiddly, requiring careful alignment to ensure proper seating. The blades meet expectations, and have exceeded my expectations on some counts.
Design & Ergonomics
The all-steel construction of the QAD EXODUS REPLACEMENT BLADES – Full Xbow 100 Grain makes them feel incredibly solid and durable. The weight is well-balanced. Their low-profile design makes them easy to stow in a quiver without snagging on branches or brush.
There is no real learning curve with these blades. They are intuitive and easy to use.
Durability & Maintenance
The QAD EXODUS REPLACEMENT BLADES – Full Xbow 100 Grain are built to last. The thick, stainless steel blades are incredibly resistant to bending or breaking, even after repeated impacts. Regular cleaning with soap and water is all that’s needed to maintain their performance.
Replacement blades are readily available and easy to install.
Accessories and Customization Options
No accessories are included with the QAD EXODUS REPLACEMENT BLADES – Full Xbow 100 Grain, as they are replacement blades designed to fit the existing QAD Exodus Full Broadhead. There are no customization options for these blades. They are meant to be a direct replacement for damaged or worn-out blades.
These blades are specific to the QAD Exodus Full broadhead, but they are compatible with any crossbow that uses standard 100-grain broadheads.
Pros and Cons of QAD EXODUS REPLACEMENT BLADES – Full Xbow 100 Grain
Pros
- Exceptional Accuracy: Flies nearly identical to field points, extending your effective range.
- Devastating Penetration: The steep cutting angle and hardened SST tip ensure consistent pass-throughs.
- Incredibly Durable: The thick, stainless steel blades withstand significant impact without bending or breaking.
- Wide Cutting Diameter: 1 1/4″ cutting diameter maximizes wound channels for faster, more humane kills.
- Easy Maintenance: Simple cleaning with soap and water keeps them in top condition.
Cons
- Fiddly Blade Replacement: Proper alignment during blade replacement requires attention to detail.
- Blade Retention Screw: It is possible, albeit uncommon, for a blade to work loose if the retention screw is not properly torqued.
Who Should Buy QAD EXODUS REPLACEMENT BLADES – Full Xbow 100 Grain?
The QAD EXODUS REPLACEMENT BLADES – Full Xbow 100 Grain are perfect for crossbow hunters who demand field-point accuracy and devastating penetration from a fixed blade broadhead. They are ideal for anyone pursuing big game. This includes deer, elk, and even tougher animals like hogs.
Hunters who prefer the convenience of expandable broadheads but are looking for increased reliability should seriously consider these blades. These blades are not for hunters who are overly concerned about price, as there are cheaper options available.
A crossbow bolt puller is a must-have accessory for anyone using the QAD EXODUS REPLACEMENT BLADES – Full Xbow 100 Grain.
Conclusion on QAD EXODUS REPLACEMENT BLADES – Full Xbow 100 Grain
The QAD EXODUS REPLACEMENT BLADES – Full Xbow 100 Grain have earned a permanent place in my hunting arsenal. Their combination of accuracy, penetration, and durability is unmatched by any other fixed blade broadhead I’ve tested. The price of $18.99 is a worthwhile investment for the performance and reliability they deliver.
I wholeheartedly recommend the QAD EXODUS REPLACEMENT BLADES – Full Xbow 100 Grain to any crossbow hunter looking to improve their accuracy, penetration, and overall hunting success. Upgrade your broadheads today and experience the QAD Exodus difference. You won’t be disappointed.