PRO MOSS500/590 BUTTSTK/CARR Review

First Thoughts on the PRO MOSS500/590 BUTTSTK/CARR

The PRO MOSS500/590 BUTTSTK/CARR from ProMag promises a significant upgrade to the classic Mossberg 500 and 590 shotguns. It’s a six-position collapsible buttstock kit complete with a seven-round shell carrier and a pistol grip. For years, I’ve customized and tinkered with firearms, always searching for ways to improve ergonomics and functionality, and this buttstock seemed like a promising step in that direction.

My primary motivation for seeking a replacement buttstock stemmed from a need for greater adjustability on my Mossberg 500. The factory stock felt too long for comfortable operation with body armor and tactical vests. I wanted a more adaptable system that could accommodate varying shooting positions and clothing layers, plus the idea of having readily available extra shells was certainly appealing.

Upon unboxing the PRO MOSS500/590 BUTTSTK/CARR, I was initially struck by its solid, heavy feel. The carbon fiber/polymer construction seemed robust, and the matte black finish gave it a tactical aesthetic. Compared to similar products like the ATI Talon T3 or the Mesa Tactical LEO adapter with an AR-15 stock, the ProMag offered an integrated shell carrier and a potentially simpler installation, which swayed my decision.

My first impression was one of cautious optimism. The heft suggested durability, but the molded plastic construction also raised concerns about long-term resilience. I was eager to see if the PRO MOSS500/590 BUTTSTK/CARR could deliver on its promise of improved ergonomics and enhanced tactical capabilities, or if it would fall short due to its construction and price point of $67.49.

Real-World Testing: Putting PRO MOSS500/590 BUTTSTK/CARR to the Test

First Use Experience

My first outing with the PRO MOSS500/590 BUTTSTK/CARR was at an outdoor shooting range. The weather was mild, and the range offered a mix of static targets and a simple clay pigeon setup. I wanted to assess the stock’s adjustability, recoil mitigation, and the convenience of the shell carrier.

The six-position adjustability proved immediately useful, allowing me to quickly find a comfortable length of pull. Recoil felt noticeably reduced compared to the factory stock, especially when firing heavier 12-gauge loads. However, the shell carrier initially felt a bit bulky and added noticeable weight to the shotgun.

Installation instructions proved to be rather poor, which lead to spending extra time trying to figure out which steps were necessary for my Mossberg 500 Persuader. There were some issues with the “flange” getting jammed inside the shaft, which made the initial install quite frustrating.

Extended Use & Reliability

After several months of use, the PRO MOSS500/590 BUTTSTK/CARR has held up reasonably well, though not without some minor issues. The finish has shown no significant wear, but there’s a noticeable rattle in the stock, despite my efforts to tighten all screws. The shell carrier continues to hold shells securely, but the added weight becomes fatiguing during extended shooting sessions.

Cleaning is straightforward; the polymer wipes down easily, and there are no intricate parts to disassemble. Compared to my previous experience with an Hogue OverMolded stock, the ProMag offers more adjustability but lacks the same level of inherent recoil absorption. However, the pistol grip offers a better grip than the Hogue OverMolded stock.

Overall, the PRO MOSS500/590 BUTTSTK/CARR has met my basic needs for adjustability and recoil reduction but has also revealed some compromises in terms of rattle and long-term comfort. With the issues with the install and rattling, it is not my favorite stock.

Breaking Down the Features of PRO MOSS500/590 BUTTSTK/CARR

Specifications

The PRO MOSS500/590 BUTTSTK/CARR is specifically designed for 12-gauge Mossberg 500, 590, and Maverick 88 shotguns. It features a six-position collapsible buttstock allowing for adjustable length of pull. The kit includes an integrated seven-round shotgun shell carrier for readily accessible ammunition.

Its construction consists of carbon fiber/polymer blend, aiming for a balance of strength and weight reduction. The stock also incorporates molded-in QD sling swivel hardpoints for versatile sling attachment. It is ambidextrous, making it suitable for both left- and right-handed shooters.

The pistol grip offers enhanced control and incorporates a storage compartment. The complete unit weighs 2.25 lbs, adding noticeable heft to the shotgun. The product is proudly Made in the USA and backed by a manufacturer’s warranty.

Performance & Functionality

The PRO MOSS500/590 BUTTSTK/CARR improves the shotgun’s ergonomics through its adjustability and enhanced grip. Recoil mitigation is adequate, though not exceptional. The shell carrier adds convenience but impacts balance and weight.

The stock’s primary strength lies in its adaptability to various shooters and shooting scenarios. The rattle is a notable weakness, detracting from the overall premium feel. It meets expectations for basic adjustability and shell carriage but falls short in terms of refined fit and finish.

Design & Ergonomics

The PRO MOSS500/590 BUTTSTK/CARR features a tactical design with a matte black finish. The carbon fiber/polymer material provides a solid feel, but the overall build quality could be more refined. The pistol grip is comfortable and provides a secure hold.

There is a slight learning curve associated with adjusting the stock and accessing the shell carrier while maintaining a proper grip. The molded-in sling swivel points are a thoughtful addition for sling attachment.

Durability & Maintenance

The carbon fiber/polymer construction should offer reasonable durability, but the plastic components are susceptible to wear and tear with heavy use. Maintenance is straightforward, requiring only occasional cleaning with a damp cloth. The potential for rattling suggests that some internal components may loosen over time, requiring periodic tightening.

Accessories and Customization Options

The PRO MOSS500/590 BUTTSTK/CARR comes with an integrated shell carrier. The pistol grip offers internal storage. It is compatible with most standard Mossberg 500/590 accessories, such as aftermarket forends and sling attachments, though modifications may be necessary for certain accessories due to the stock’s design.

Pros and Cons of PRO MOSS500/590 BUTTSTK/CARR

Pros

  • Provides adjustable length of pull with its six-position collapsible design.
  • Features an integrated seven-round shell carrier for quick access to extra ammunition.
  • Offers enhanced control with its ergonomic pistol grip.
  • Incorporates molded-in QD sling swivel hardpoints for versatile sling attachment options.
  • Relatively easy to install.

Cons

  • Exhibits noticeable rattle and play in the stock.
  • Instructions are poorly written and difficult to follow.
  • Shell carrier adds significant weight and bulk.


Who Should Buy PRO MOSS500/590 BUTTSTK/CARR?

The PRO MOSS500/590 BUTTSTK/CARR is perfect for budget-conscious shooters seeking adjustable ergonomics and enhanced tactical capabilities for their Mossberg 500/590. It’s suitable for home defense enthusiasts, recreational shooters, and those who appreciate the convenience of an integrated shell carrier.

Those prioritizing premium build quality, a rattle-free experience, and more detailed instructions should skip this product. Consider alternatives like the Magpul SGA stock, which offers superior fit and finish, albeit at a higher price.

A must-have modification would be adding some sort of rubber or tape to remove play in the stock to reduce or eliminate the rattle. A better set of instructions might make the install easier.

Conclusion on PRO MOSS500/590 BUTTSTK/CARR

The PRO MOSS500/590 BUTTSTK/CARR offers a mixed bag of features and compromises. Its adjustability, shell carrier, and enhanced grip provide tangible benefits, while its rattle and poor instructions detract from the overall experience. The price of $67.49 is justified for the feature set, but buyers should be aware of the potential shortcomings.

Personally, I would cautiously recommend it to those on a tight budget who understand its limitations and are willing to tolerate some minor imperfections. The PRO MOSS500/590 BUTTSTK/CARR is a functional upgrade that delivers on its core promises but falls short of achieving true premium status. If adjustability and extra shell carriage are your primary goals, this stock is worth considering.


Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top