Pride Abrasive Flattening Stone 320 Grit Review

First Impressions of Pride Abrasive Flattening Stone 320 Grit

The Pride Abrasive Flattening Stone 320 Grit enters the scene as a crucial tool for maintaining the sharpness and longevity of knives, chisels, and other edged implements. Manufactured by Pride Abrasive, this flattening stone boasts a 320 grit abrasive surface designed to quickly and efficiently level out the uneven surfaces of water stones and other sharpening tools. At a price point of $24.95, it promises a cost-effective solution to a problem that plagues anyone serious about maintaining a razor-sharp edge.

I’ve spent years honing (pun intended) my sharpening skills, and I’ve seen firsthand how a warped or dished-out sharpening stone can compromise even the best technique. My existing flattening method involved a diamond plate, but the abrasive surface has begun to wear unevenly. I was looking for a reliable, flat, and relatively inexpensive solution.

The Pride Abrasive Flattening Stone 320 Grit arrived securely packaged in a simple cardboard box. Lifting it, I immediately noticed the substantial weight; it felt solid and well-made, inspiring confidence. The dimensions, approximately 9.88″ x 6″ x 0.75″, seemed generous, offering ample surface area for flattening even larger sharpening stones.

Compared to my worn diamond plate and a smaller, less aggressive flattening stone I had previously used, the Pride Abrasive Flattening Stone 320 Grit appeared to strike a good balance between size, grit, and affordability. It seemed like a better value proposition than replacing my expensive diamond plate. My initial impression was positive, and I was eager to put it to work.


Real-World Testing: Putting Pride Abrasive Flattening Stone 320 Grit to the Test

First Use Experience

I first tested the Pride Abrasive Flattening Stone 320 Grit in my workshop, which is generally a climate-controlled environment, after flattening a well used 1000 grit waterstone. I set up a dedicated flattening station with a non-slip mat to prevent the stone from sliding around. The process was simple: soaking both the flattening stone and water stone, and then working the water stone across the surface of the Pride Abrasive Flattening Stone 320 Grit in a figure-eight pattern.

The stone performed admirably under normal shop conditions. It quickly and efficiently removed the dishing from the water stone, creating a perfectly flat surface for sharpening. The Pride Abrasive Flattening Stone 320 Grit worked smoothly and consistently.

However, the residue produced during flattening can become a bit messy. I noticed that controlling the slurry was important to maintain consistent contact. I had to rinse both stones frequently with clean water.

Extended Use & Reliability

After several weeks of using the Pride Abrasive Flattening Stone 320 Grit to maintain my water stones, it has proven to be a reliable and consistent tool. I flatten my sharpening stones, on average, once a week, which ensures I always have a flat surface. The flatness of the stone has held up without any perceivable wear.

There are no signs of significant wear and tear on the flattening stone itself. I ensure the stone is clean and dry after each use. The stone exhibits consistent performance and the Pride Abrasive Flattening Stone 320 Grit is easy to clean with a simple scrub brush and water.

Compared to my previous diamond plate, the Pride Abrasive Flattening Stone 320 Grit is a more consistent performer. The diamond plate’s abrasive surface wore unevenly, leading to inconsistent flattening. The Pride Abrasive Flattening Stone 320 Grit has maintained its flatness and cutting ability.

Breaking Down the Features of Pride Abrasive Flattening Stone 320 Grit

Specifications

The Pride Abrasive Flattening Stone 320 Grit has specific features designed for flattening sharpening stones. The stone features a 320 grit abrasive surface which is aggressive enough to quickly remove material from warped sharpening stones. The 9.88″ x 6″ surface is large enough for most sharpening stones.

The large surface area and relatively coarse grit are essential for efficient and effective flattening. The generous dimensions provide ample room to work, preventing the edges of the sharpening stone from running off the flattening stone. The coarse 320 grit removes material quickly.

Performance & Functionality

The Pride Abrasive Flattening Stone 320 Grit performs its job remarkably well. It efficiently flattens water stones and other sharpening stones, restoring them to a perfectly flat and usable condition. The flatness ensures consistent sharpening results.

The Pride Abrasive Flattening Stone 320 Grit’s strength lies in its ability to quickly and consistently remove material. However, the 320 grit leaves a somewhat coarse surface on the sharpened stone, requiring finer grit to refine. The stone meets my expectations, providing a reliable and cost-effective way to maintain my sharpening stones.

Design & Ergonomics

The Pride Abrasive Flattening Stone 320 Grit is a simple, rectangular block. The quality of the abrasive material is apparent in its consistent cutting action. The weight of the stone is substantial.

The stone is relatively user-friendly. The stone is designed to be used with water, creating a slurry that aids in the flattening process. There is no steep learning curve.

Durability & Maintenance

The Pride Abrasive Flattening Stone 320 Grit appears to be durable and long-lasting. With proper care and maintenance, it should provide years of reliable service. Regular cleaning with water and a scrub brush is generally sufficient to maintain its performance.

Given the nature of abrasive stones, eventual wear is inevitable, but the stone should remain usable for a long time. The Pride Abrasive Flattening Stone 320 Grit is easy to maintain.

Accessories and Customization Options

The Pride Abrasive Flattening Stone 320 Grit does not come with any additional accessories. The stone is intended to be used as is, without any modifications or customization.

The stone’s effectiveness is enhanced by using it with a non-slip mat to prevent movement during use. Also, a small scrub brush is helpful for cleaning the stone. The Pride Abrasive Flattening Stone 320 Grit is compatible with a wide variety of sharpening stones from different brands.

Pros and Cons of Pride Abrasive Flattening Stone 320 Grit

Pros

  • The Pride Abrasive Flattening Stone 320 Grit quickly and effectively flattens water stones and other sharpening stones. This saves time and effort.
  • The large surface area of the stone provides ample room to work, accommodating larger sharpening stones. This promotes consistent flattening.
  • The Pride Abrasive Flattening Stone 320 Grit is a cost-effective alternative to expensive diamond plates, offering excellent value. This saves money.
  • The durable construction of the stone ensures long-lasting performance, providing a reliable tool for years. This maximizes value.
  • Simple maintenance with water and a scrub brush makes it easy to keep the stone in optimal condition. This saves time.

Cons

  • The relatively coarse 320 grit leaves a somewhat coarse surface on the sharpening stone, requiring finer grits for refinement. This adds an extra step.
  • The mess created by the slurry during flattening requires frequent cleaning. This can be a nuisance.


Who Should Buy Pride Abrasive Flattening Stone 320 Grit?

The Pride Abrasive Flattening Stone 320 Grit is perfect for woodworkers, chefs, knife enthusiasts, and anyone who regularly uses and maintains water stones or other sharpening stones. Those who appreciate a perfectly flat sharpening surface will benefit from its ability to quickly restore warped stones.

Anyone who prefers a very fine finish directly from the flattening stone should skip this product. The Pride Abrasive Flattening Stone 320 Grit leaves a relatively coarse surface that requires additional refinement.

A non-slip mat to prevent movement during use is a must-have accessory. A small scrub brush is useful for cleaning the stone.

Conclusion on Pride Abrasive Flattening Stone 320 Grit

The Pride Abrasive Flattening Stone 320 Grit is a reliable, cost-effective, and efficient tool for maintaining the flatness of sharpening stones. The large surface area, durable construction, and ease of maintenance make it an excellent choice for anyone serious about sharpening.

At $24.95, the price is more than justified by the stone’s performance and longevity. It is significantly cheaper than replacing worn diamond plates or other flattening solutions.

I would definitely recommend the Pride Abrasive Flattening Stone 320 Grit to anyone looking for a dependable and affordable way to keep their sharpening stones in top condition. Invest in the Pride Abrasive Flattening Stone 320 Grit and ensure your edges are always razor sharp!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top