Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd) Review

First Thoughts on the Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd)

The Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd) offers a simple solution to a common problem: improving the grip and capacity of the Glock 43. Offered by Pearce Grips, this extension replaces the magazine floor plate, adding both an extra round and a more substantial gripping surface. For anyone carrying a Glock 43, a subcompact known for its concealability but sometimes criticized for its small grip, this extension seems like a practical and affordable upgrade.

My journey with the Glock 43 began with a focus on concealed carry, appreciating its slim profile. However, I quickly realized that the limited grip space impacted my control and accuracy, especially during rapid-fire drills. The search began for a solution that wouldn’t compromise concealability but would enhance my handling of the firearm.

Upon receiving the Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd), my initial impression was positive. The polymer construction felt robust, and the texture seemed to match the factory grip well. The extension felt lightweight, a critical factor given my aim to maintain the Glock 43’s concealability.

Compared to other magazine extensions on the market, such as those from Taran Tactical Innovations or Strike Industries, the Pearce Grips extension stood out for its minimalist design and budget-friendly price point. While the higher-end options offer more aggressive styling and potentially more significant grip enhancements, I chose the Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd) for its balance of practicality, affordability, and discreet profile. I was excited to see if this simple addition could significantly improve my shooting experience.

Real-World Testing: Putting Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd) to the Test

First Use Experience

My first experience with the Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd) was at my local shooting range. I ran several drills focusing on drawing from concealment and rapid target acquisition. The improved grip immediately made a difference.

The added length provided a secure resting point for my pinky finger, which previously had nowhere to go, resulting in a significantly more stable grip. Under moderately dusty conditions, the Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd) maintained its grip texture effectively. I did not experience any slippage or loss of control. The added round of capacity also gave me a slight boost in confidence.

Extended Use & Reliability

After several months of consistent use, the Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd) has proven to be a reliable addition to my Glock 43. It has held up remarkably well, showing no significant signs of wear and tear beyond minor scuff marks from holster use. The polymer construction remains sturdy, and the extension continues to fit securely to the magazine body.

Cleaning is simple; I typically wipe it down with a damp cloth and occasionally use a mild solvent to remove any stubborn residue. Compared to my previous experience with the stock Glock 43 magazines, the Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd) significantly outperforms in terms of handling and comfort. I was pleasantly surprised by its durability and consistent performance.

Breaking Down the Features of Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd)

Specifications

The Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd) is designed specifically for the Glock 43 chambered in 9mm Luger. It increases the magazine capacity by one round, bringing the total to 7+1. The extension itself is made of durable polymer with a black finish to match the factory Glock aesthetics.

The 3/4″ gripping surface adds noticeable length to the grip, improving control and comfort, particularly for shooters with larger hands. This seemingly small change makes a substantial difference in the overall shooting experience. The lightweight polymer construction prevents excessive weight gain, preserving the Glock 43’s concealability.

Performance & Functionality

The Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd) enhances the Glock 43’s functionality by providing a more secure and comfortable grip. This improved grip leads to better accuracy and control, especially during rapid-fire scenarios. The added round of capacity is a welcome bonus, providing an extra margin of security without significantly increasing the overall size of the firearm.

While the extension performs its intended function admirably, it is essential to note that it only adds one round. Some users might prefer extensions that offer a greater increase in capacity, but these typically come with a larger overall size. The Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd) strikes a good balance between capacity, concealability, and improved handling.

Design & Ergonomics

The Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd) is designed to seamlessly integrate with the Glock 43’s existing grip. The polymer material feels similar to the factory grip, and the texture is designed to match, providing a consistent feel. Installation is simple, requiring only the removal of the existing magazine floor plate and replacement with the extension.

The added length is well-proportioned, providing enough space for a full grip without making the firearm feel unwieldy. The ergonomics are noticeably improved, especially for those with larger hands who previously struggled to find a comfortable grip on the compact Glock 43 frame. There is virtually no learning curve; the improved grip is immediately noticeable and intuitive.

Durability & Maintenance

The polymer construction of the Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd) is surprisingly durable, capable of withstanding daily use and exposure to various environmental conditions. After months of regular carry and range sessions, the extension shows no signs of cracking or breaking.

Maintenance is minimal; a simple wipe-down with a damp cloth is typically sufficient to keep the extension clean. More thorough cleaning can be done with a mild solvent if necessary, but harsh chemicals should be avoided to prevent damage to the polymer. The Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd) appears built to last, providing a long-term solution for improving the Glock 43’s grip and capacity.

Accessories and Customization Options

The Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd) does not come with any additional accessories beyond the extension itself. However, it is compatible with most standard Glock 43 magazines and aftermarket base plates designed for the Glock 43 platform.

Users can further customize their Glock 43 with aftermarket grips, sights, and other accessories to enhance its performance and aesthetics. The Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd) complements these other modifications, creating a more personalized and effective firearm. It is important to ensure that any modifications are installed correctly and do not interfere with the safe operation of the firearm.

Pros and Cons of Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd)

Who Should Buy Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd)?

The Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd) is perfect for Glock 43 owners seeking to improve their grip and add a small capacity increase without sacrificing concealability. It’s ideal for concealed carriers, recreational shooters, and anyone who finds the stock Glock 43 grip too small or uncomfortable. This product is also an excellent choice for those who prioritize affordability and practicality over high-end aesthetics.

Those who prioritize maximum capacity or prefer a more aggressively textured grip should skip this product. Users with exceptionally large hands might find that the 3/4″ extension is not quite enough to provide a full and comfortable grip. These individuals may want to explore alternative extensions that offer a more substantial increase in length and girth.

Must-have accessories include a reliable holster designed for the Glock 43, and potentially aftermarket sights to further enhance accuracy.

Conclusion on Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd)

The Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd) is a simple, affordable, and effective upgrade for the Glock 43. It significantly improves grip and control, adds a welcome extra round of capacity, and maintains the firearm’s concealability. The price is absolutely justified given the tangible improvements in handling and performance.

I would wholeheartedly recommend this product to any Glock 43 owner looking to enhance their shooting experience. For a minimal investment, the Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4″ Gripping Surface for Glock 43 (Adds 1rd) delivers a substantial improvement in comfort, control, and overall confidence. Upgrade your Glock 43 today, and experience the difference!