Let’s Talk About NavPod GP1505 SystemPod Pre-Cut f/Furuno GP1670/GP1670F 5.7″ w/Space On The Left f/9.5″ Wide Guard
The NavPod GP1505 SystemPod Pre-Cut f/Furuno GP1670/GP1670F 5.7″ w/Space On The Left f/9.5″ Wide Guard isn’t just another piece of marine hardware; it’s an investment in the longevity and usability of your valuable navigation electronics. This sleek, black pod from NavPod offers a secure and weatherproof housing solution specifically designed for the Furuno GP1670/GP1670F 5.7″ chartplotter, while also providing space for additional instruments or controls on its left side. This thoughtfully designed unit caught my attention because it offered a solution to declutter my helm, protecting my equipment while improving overall visibility and accessibility.
For years, I’ve struggled with exposed chartplotters and instruments, vulnerable to the harsh marine environment. Salt spray, UV rays, and accidental bumps took their toll, shortening the lifespan of expensive electronics. I needed a robust, weatherproof solution that seamlessly integrated into my existing setup.
Upon unboxing the NavPod GP1505 SystemPod Pre-Cut, I was immediately impressed by its solid construction and clean lines. The acrylic capped ABS plastic felt incredibly durable, and the pre-cut opening for the Furuno unit was precise. The overall weight felt substantial, indicating a quality build, but not overly heavy to cause mounting concerns.
I considered alternatives like building a custom enclosure or using generic, non-pre-cut pods. Ultimately, I chose the NavPod for its purpose-built design and reputation for weather resistance. The NavPod’s pre-cut design for the Furuno GP1670/GP1670F and the integrated space for other instruments were the key factors in my decision, saving me valuable time and potential errors in installation.
My initial impression was excitement. I finally had a solution that looked professional, offered superior protection, and improved the functionality of my helm.
Real-World Testing: Putting NavPod GP1505 SystemPod Pre-Cut f/Furuno GP1670/GP1670F 5.7″ w/Space On The Left f/9.5″ Wide Guard to the Test
First Use Experience
I installed the NavPod GP1505 SystemPod Pre-Cut on the flybridge of my sport fishing boat, which is frequently exposed to heavy seas and direct sunlight. Installation was straightforward, thanks to the included stainless steel mounting hardware and gaskets. The pre-cut opening fit my Furuno GP1670F perfectly, and I was able to easily route the necessary cables.
During the first few offshore trips, the NavPod proved its worth in various conditions. It withstood driving rain, heavy spray, and intense UV exposure without any signs of leakage or discoloration. The viewing angle of the chartplotter remained clear and unobstructed, even in bright sunlight.
The NavPod GP1505 SystemPod Pre-Cut was instantly easy to use. I did not need any time to get used to it.
Extended Use & Reliability
After six months of regular use, the NavPod GP1505 SystemPod Pre-Cut has held up remarkably well. There are no signs of wear and tear, and the acrylic capped ABS plastic continues to look as good as new. Regular cleaning with mild soap and water is all that’s needed to maintain its appearance.
The NavPod’s durability has far exceeded my expectations. My previous open-mounted chartplotter required constant cleaning and showed signs of fading and corrosion within a few months. This NavPod has proven to be a significant upgrade in terms of both protection and aesthetics.
Maintenance is very easy. The smooth surface wipes clean easily. The watertight seal is still effective after extended exposure to harsh conditions.
Breaking Down the Features of NavPod GP1505 SystemPod Pre-Cut f/Furuno GP1670/GP1670F 5.7″ w/Space On The Left f/9.5″ Wide Guard
Specifications
The NavPod GP1505 SystemPod Pre-Cut f/Furuno GP1670/GP1670F 5.7″ w/Space On The Left f/9.5″ Wide Guard is specifically designed for mounting a Furuno GP1670/GP1670F 5.7″ chartplotter and has space on the left for a 9.5″ wide guard. It’s constructed from acrylic capped ABS plastic for exceptional durability and weather resistance. The NavPod comes in black and includes chromed stainless steel tamper-proof fasteners to increase the security of the installation.
This NavPod offers enhanced protection and organization on your boat. The pre-cut design ensures a perfect fit for your Furuno unit, simplifying installation.
Performance & Functionality
The NavPod GP1505 SystemPod Pre-Cut performs its job flawlessly. It provides a secure, weatherproof enclosure for valuable electronics, protecting them from the elements and physical damage. It is easy to install and use.
Its greatest strength is its robust construction and perfect fit for the Furuno GP1670/GP1670F. An area that could potentially be improved is a more detailed installation guide included within the packaging. However, the installation process is straightforward.
This unit exceeded expectations. It offered far more protection than my previous setup.
Design & Ergonomics
The NavPod GP1505 SystemPod Pre-Cut boasts a sleek, functional design. The black acrylic capped ABS plastic provides a clean, professional look, and the viewing angle of the chartplotter is optimized for easy visibility. The pod’s weight is substantial but not excessive, and the overall build quality is excellent.
The NavPod is user-friendly, and the pre-cut design eliminates the need for complicated modifications. The NavPod has a secure and durable build quality that will give the user confidence that their equipment is safe.
Durability & Maintenance
The NavPod GP1505 SystemPod Pre-Cut is built to last. The acrylic capped ABS plastic is highly resistant to UV damage, salt spray, and impact. Maintenance is minimal, requiring only occasional cleaning with mild soap and water.
Based on its construction and materials, the NavPod should provide years of reliable service. It is easy to maintain and repair, with readily available replacement parts if needed.
Accessories and Customization Options
The NavPod GP1505 SystemPod Pre-Cut includes stainless steel mounting hardware and mounting gaskets. While the NavPod itself doesn’t offer extensive customization options, the additional space on the left allows for the integration of other instruments or controls, such as autopilot displays or VHF radio microphones.
The NavPod is designed to work seamlessly with NavPod’s Single Bend AngleGuards and SK135 Stachion Kit. These provide versatile mounting solutions for various boat configurations.
Pros and Cons of NavPod GP1505 SystemPod Pre-Cut f/Furuno GP1670/GP1670F 5.7″ w/Space On The Left f/9.5″ Wide Guard
Pros
- Robust and Weatherproof Construction: The acrylic capped ABS plastic and double seal provide excellent protection from the elements.
- Pre-Cut for Furuno GP1670/GP1670F: Ensures a perfect fit and simplifies installation.
- Space for Additional Instruments: Allows for the integration of other controls, decluttering the helm.
- Easy Installation: Stainless steel mounting hardware and gaskets are included.
- Professional Appearance: Sleek black finish enhances the aesthetics of any boat.
Cons
- Price: It might be considered expensive compared to DIY solutions.
- Limited Customization: Beyond the integrated space for instruments, the NavPod offers little room for further modification.
Who Should Buy NavPod GP1505 SystemPod Pre-Cut f/Furuno GP1670/GP1670F 5.7″ w/Space On The Left f/9.5″ Wide Guard?
The NavPod GP1505 SystemPod Pre-Cut is perfect for boat owners who want a professional, weatherproof solution for mounting their Furuno GP1670/GP1670F chartplotter and want to protect expensive marine electronics. Anyone with a small boat or large yacht would benefit from this enclosure.
Those on a very tight budget or who prefer a completely custom look may want to explore alternative options. A skilled DIY enthusiast could possibly build their own enclosure at a lower cost.
I suggest using NavPod AngleGuards for mounting, especially on sailboats. A quality sealant for the mounting hardware is also advised, as well as a sun cover to protect the unit from sun bleaching and extreme temperatures.
Conclusion on NavPod GP1505 SystemPod Pre-Cut f/Furuno GP1670/GP1670F 5.7″ w/Space On The Left f/9.5″ Wide Guard
The NavPod GP1505 SystemPod Pre-Cut f/Furuno GP1670/GP1670F 5.7″ w/Space On The Left f/9.5″ Wide Guard is a worthwhile investment for anyone seeking a durable, weatherproof enclosure for their Furuno chartplotter. It is easy to install. It is professional looking.
While the price may seem high, the protection it offers to valuable electronics and the ease of installation make it a justifiable expense. You will feel secure when using your equipment.
I wholeheartedly recommend the NavPod GP1505 SystemPod Pre-Cut to any boat owner looking to protect and enhance their navigation system. Invest in a NavPod and enjoy peace of mind knowing your electronics are safe from the harsh marine environment.