First Impressions of Midwest Industries Lever Gun Two Chamber Muzzle Brake
Lever-action rifles, especially those chambered in hard-hitting cartridges like .45-70, are iconic. But that iconic recoil can be a real bear, especially during extended range sessions or hunting situations where quick follow-up shots are crucial. That’s where the Midwest Industries Lever Gun Two Chamber Muzzle Brake comes into play, promising to tame that bucking bronco and improve shootability. I was eager to see if this relatively affordable option could deliver on its promises without breaking the bank or significantly altering the classic lever gun aesthetic.
For years, I’ve wrestled with the stout recoil of my Marlin 1895 SBL. This led me on a quest for a practical recoil solution without compromising the rifle’s handling. High-end, multi-chamber brakes are out there, but I wanted something effective, budget-friendly, and relatively low-profile.
The Midwest Industries brake arrived in a simple package with a crush washer, ready for installation. The initial impression was utilitarian; the black finish seemed a bit rough, as noted by another user, but the overall construction felt solid. Compared to brakes from Ranger Point Precision or XS Sights, the Midwest Industries model is significantly more compact and less visually aggressive. I chose it primarily for its balance of price and potential performance, hoping to get a good reduction in recoil without drastically changing the rifle’s appearance.
My first impression was a mix of cautious optimism and slight disappointment about the finish. I was excited to potentially reduce recoil, but concerned about the cosmetic match to my rifle. I was definitely curious to see how it would perform on the range.
Real-World Testing: Putting Midwest Industries Lever Gun Two Chamber Muzzle Brake to the Test
First Use Experience
My first test of the Midwest Industries Lever Gun Two Chamber Muzzle Brake took place at my local outdoor range, under partly cloudy skies. I brought a variety of .45-70 loads, ranging from mild cowboy action rounds to some truly potent hunting ammunition. I wanted to see how the brake performed across the spectrum of recoil.
The difference was immediately noticeable, even with the lighter loads. The muzzle rise was significantly reduced, allowing for faster target reacquisition. With the heavier hunting loads, the brake truly shined, turning what was previously a shoulder-punishing experience into something far more manageable. There were no initial issues and the brake seemed to function flawlessly.
Extended Use & Reliability
After several months of regular use, the Midwest Industries Lever Gun Two Chamber Muzzle Brake has held up surprisingly well. There are no signs of loosening or damage, despite repeated exposure to the concussive forces of .45-70 rounds. Cleaning is straightforward, requiring only a quick wipe-down after each range session.
The finish, while initially disappointing, hasn’t deteriorated further. Compared to shooting the same rifle without the brake, I can now comfortably shoot twice as many rounds in a single session. The Midwest Industries brake certainly outperforms shooting without a brake and allows for tighter groupings due to reduced flinching.
Breaking Down the Features of Midwest Industries Lever Gun Two Chamber Muzzle Brake
Specifications
- Threads per Inch: 11/16×24. This is the thread pattern commonly found on many modern lever-action rifles chambered in .45-70 and other large-bore cartridges. Ensuring proper thread engagement is critical for safe and effective brake operation.
- .500” Diameter Hole: This bore diameter is designed to accommodate the .458″ bullet diameter of .45-70 rounds, as well as providing some clearance. Too small of a hole and the brake becomes a catastrophic obstruction.
- Material: Steel. Provides adequate durability for repeated use.
- Color: Black. While visually appealing, the finish is admittedly not the highest quality.
- Country of Origin: USA. This can appeal to buyers who want to support American manufacturing and quality control.
- Includes new crush washer: Necessary for proper installation and timing of the muzzle brake.
Performance & Functionality
The primary function of the Midwest Industries Lever Gun Two Chamber Muzzle Brake is to reduce felt recoil and muzzle rise. It accomplishes this by redirecting propellant gases rearward and to the sides. The two-chamber design provides a noticeable reduction in recoil, though it may not be as effective as more complex, multi-chambered brakes.
It excels at reducing muzzle climb. The straightforward design ensures reliable performance, although the crude finish is a definite weakness. The brake performs admirably, considering its price point.
Design & Ergonomics
The Midwest Industries Lever Gun Two Chamber Muzzle Brake features a simple, cylindrical design with two distinct chambers. The brake’s compact size keeps the rifle relatively streamlined. The weight is minimal and doesn’t significantly alter the rifle’s balance.
Installation is easy with the included crush washer. The brake’s functionality is straightforward and requires no adjustments. The finish could definitely be improved, but the overall design is practical and effective.
Durability & Maintenance
Constructed from steel, the Midwest Industries Lever Gun Two Chamber Muzzle Brake is built to withstand the rigors of repeated use. Regular cleaning with a solvent and brush is all that’s needed to keep it in good working order. The simple design minimizes potential failure points.
With proper care, the brake should last for many years. The finish is the main concern regarding long-term aesthetics.
Accessories and Customization Options
The Midwest Industries Lever Gun Two Chamber Muzzle Brake doesn’t come with any specific accessories beyond the crush washer. However, its 11/16×24 threads are compatible with any other devices that share the same thread pattern. This opens the door to attaching suppressors or other muzzle devices, provided they are rated for the .45-70 cartridge.
There are no included customization options with the brake itself. The aftermarket offers numerous options for lever-action rifles including stocks, rails, and sights.
Pros and Cons of Midwest Industries Lever Gun Two Chamber Muzzle Brake
Pros
- Noticeable recoil reduction: Reduces felt recoil, improving shootability and allowing for faster follow-up shots.
- Affordable price point: Significantly less expensive than many other muzzle brakes on the market.
- Easy installation: Simple design and included crush washer make installation straightforward.
- Durable construction: Steel construction ensures long-lasting performance.
- Compact design: Doesn’t significantly alter the rifle’s overall length or balance.
Cons
- Crude finish: The black finish is not the highest quality and may not perfectly match the rifle’s existing finish.
- Two-chamber design: May not be as effective as multi-chambered brakes in reducing recoil.
Who Should Buy Midwest Industries Lever Gun Two Chamber Muzzle Brake?
The Midwest Industries Lever Gun Two Chamber Muzzle Brake is perfect for lever-action rifle owners who want to reduce recoil without spending a fortune. It’s ideal for hunters who need quick follow-up shots. Target shooters and those with shoulder issues will also benefit.
Those seeking a premium finish or maximum recoil reduction might want to explore higher-end options. Owners who prioritize aesthetics above all else might be turned off by the crude finish. A quality lever wrap is a must-have accessory for comfort.
Conclusion on Midwest Industries Lever Gun Two Chamber Muzzle Brake
The Midwest Industries Lever Gun Two Chamber Muzzle Brake offers an excellent balance of performance and affordability. While the finish leaves something to be desired, the brake effectively reduces recoil and muzzle rise, making it a worthwhile upgrade for many lever-action rifles. The price is absolutely justified by the functional improvement it provides.
I would definitely recommend it to anyone looking for a budget-friendly recoil solution for their lever gun. If you’re tired of getting beat up by your .45-70, give the Midwest Industries brake a try. You might be surprised at how much it improves your shooting experience.
