Let’s Talk About Midwest Industries AK 47/74 Generation 2 Trijicon MRO Quick Detach Modular AK Scope Mount
The AK platform is renowned for its ruggedness and reliability, but traditionally, optics mounting has been its Achilles’ heel. Enter the Midwest Industries AK 47/74 Generation 2 Trijicon MRO Quick Detach Modular AK Scope Mount, a purpose-built solution for securely and repeatably mounting a Trijicon MRO red dot sight to your AK. This mount promises to solve the common AK optic mounting woes with its robust design, quick detach capability, and modularity, allowing for future optic changes without replacing the entire system.
For years, I’ve struggled with finding a reliable AK optic mount. I’ve dealt with side rail mounts that shifted zero, dust cover mounts that weren’t truly solid, and generally frustrating experiences. The promise of a centered, low-profile MRO mount with a quick detach system immediately piqued my interest.
Upon unboxing, the Midwest Industries mount immediately impressed me with its solid feel and clean finish. The hard coat anodized 6061 aluminum construction felt incredibly durable, and the machining was precise. It was noticeably lighter than some of the bulkier steel mounts I’ve used, which is a welcome change.
Compared to a traditional side rail mount or a railed dust cover, the Midwest Industries mount offered a significantly lower profile, bringing the MRO closer to the bore axis. I also considered the RS Regulate AK-300 modular system, known for its adjustability, but I ultimately chose the Midwest Industries for its simplicity and dedicated MRO footprint. My initial impression was one of cautious optimism; it looked right, but the proof would be in the performance.
Real-World Testing: Putting Midwest Industries AK 47/74 Generation 2 Trijicon MRO Quick Detach Modular AK Scope Mount to the Test
First Use Experience
My first test of the Midwest Industries AK 47/74 Generation 2 Trijicon MRO Quick Detach Modular AK Scope Mount was at my local outdoor range. The weather was typical for late spring: intermittent showers and moderate humidity. I mounted the mount on my trusty Arsenal SLR-107FR, already zeroed with iron sights.
Installation was straightforward, fitting securely to the AK receiver interface with no slop or wobble. The MRO attached easily to the mount. During my initial zeroing, I was immediately impressed with the stability of the mount.
Extended Use & Reliability
After several range trips and a carbine course spanning several months, the Midwest Industries mount has proven to be incredibly reliable. There are no signs of loosening or shifting, and my zero has remained consistent, even after repeated removal and reattachment using the Elite Defense QD system. The hard coat anodized finish has held up well, showing no significant wear despite being bumped around in my range bag and exposed to various weather conditions.
Maintenance is simple; a quick wipe down with a lightly oiled cloth after each range session is all it takes to keep it in good condition. In comparison to previous AK optic mounting solutions I’ve used, this mount has dramatically outperformed them in terms of stability, ease of use, and overall durability. This is the most confident I’ve been with an optic on an AK.
Breaking Down the Features of Midwest Industries AK 47/74 Generation 2 Trijicon MRO Quick Detach Modular AK Scope Mount
Specifications
The Midwest Industries AK 47/74 Generation 2 Trijicon MRO Quick Detach Modular AK Scope Mount is specifically designed for AK 47/74 rifles with a military AK receiver interface. It is made by Midwest Industries, a reputable manufacturer known for high-quality firearm accessories. The mount is finished in black and weighs in at a mere 5.8 ounces.
The mount’s most notable feature is its Trijicon MRO footprint. This ensures a secure and proper fit for the optic. The mount is proudly made in the USA.
Performance & Functionality
The Midwest Industries AK 47/74 Generation 2 Trijicon MRO Quick Detach Modular AK Scope Mount performs exceptionally well. The mount’s primary function is to provide a stable and repeatable platform for mounting a Trijicon MRO, and it delivers flawlessly. The quick detach system allows for rapid removal and reattachment of the optic without losing zero.
One minor critique is the lack of left-to-right adjustment, as noted by some users. However, on rifles built to mil-spec, this is generally not an issue. The mount meets and exceeds my expectations, providing a solid and reliable optic mounting solution for my AK.
Design & Ergonomics
The Midwest Industries mount features a well-thought-out design and excellent ergonomics. The mount is constructed from hard coat anodized 6061 aluminum, ensuring durability while keeping weight to a minimum. The low-profile design positions the MRO close to the bore axis.
The mount is incredibly user-friendly; installation is straightforward, and the quick detach lever is easy to operate, even with gloves. The modular top piece offers flexibility, allowing for future optic changes without replacing the entire mount.
Durability & Maintenance
The Midwest Industries AK 47/74 Generation 2 Trijicon MRO Quick Detach Modular AK Scope Mount is built to last. The hard coat anodized aluminum construction is resistant to corrosion and wear, ensuring years of reliable use. Maintenance is minimal; a quick wipe down after each range session is all that’s required to keep it in good condition.
The simplicity of the design also means there are fewer parts to potentially break or require repair. The mount’s durable construction and ease of maintenance make it a worthwhile investment for any AK owner.
Accessories and Customization Options
The Midwest Industries AK 47/74 Generation 2 Trijicon MRO Quick Detach Modular AK Scope Mount is primarily designed for use with a Trijicon MRO optic. The modular top piece allows users to potentially swap to different optic mounting platforms in the future, although this would require purchasing a separate top piece. Compatibility with other accessories, such as magnifiers, depends on the specific accessory and the available rail space on the AK.
Pros and Cons of Midwest Industries AK 47/74 Generation 2 Trijicon MRO Quick Detach Modular AK Scope Mount
Pros
- Rock-solid MRO Mounting Platform: Provides an incredibly stable base for the Trijicon MRO, ensuring consistent zero.
- Quick Detach System: Allows for rapid removal and reattachment of the optic without loss of zero.
- Low Profile Design: Positions the optic close to the bore axis for improved shooting dynamics.
- Durable Construction: Made from hard coat anodized 6061 aluminum for long-lasting durability.
- Easy Installation: Simple and straightforward installation process.
Cons
- Lack of Left/Right Adjustment: May require shimming on some AK variants to achieve perfect centering.
- MRO Specific: Limited to Trijicon MRO optics without purchasing additional modular top pieces.
Who Should Buy Midwest Industries AK 47/74 Generation 2 Trijicon MRO Quick Detach Modular AK Scope Mount?
The Midwest Industries AK 47/74 Generation 2 Trijicon MRO Quick Detach Modular AK Scope Mount is perfect for AK owners looking for a reliable and repeatable optic mounting solution. This is ideal for competition shooters, tactical users, and anyone who wants to modernize their AK with a red dot sight.
Those with AK variants that deviate significantly from mil-spec dimensions might want to explore other adjustable mounting options. Anyone not running an MRO, should explore other options as well. A must-have accessory is a quality Trijicon MRO optic!
Conclusion on Midwest Industries AK 47/74 Generation 2 Trijicon MRO Quick Detach Modular AK Scope Mount
The Midwest Industries AK 47/74 Generation 2 Trijicon MRO Quick Detach Modular AK Scope Mount is an excellent investment for AK owners seeking a rock-solid optic mounting solution. The mount’s durable construction, quick detach system, and low-profile design make it a top contender in the AK optic mounting market. At $167.95, the price is justified by the quality and performance.
I wholeheartedly recommend this mount to anyone looking to upgrade their AK with a Trijicon MRO. Ditch those wobbly side mounts and experience the stability and reliability of the Midwest Industries mount – you won’t regret it!