Meprolight FT Bullseye S&W M&P Fixed Rear Tritium/Fiber Handgun Sight Review

First Thoughts on the Meprolight FT Bullseye S&W M&P Fixed Rear Tritium/Fiber Handgun Sight

The Meprolight FT Bullseye S&W M&P Fixed Rear Tritium/Fiber Handgun Sight promises a revolutionary approach to handgun aiming. Meprolight, a well-respected name in the firearms optics industry, aims to simplify the sight picture by combining fiber optic and tritium illumination into a single, intuitive aiming point. The promise of faster target acquisition and improved low-light performance immediately caught my attention.

For years, I’ve struggled with traditional iron sights on my S&W M&P, especially in dynamic shooting scenarios. Aligning the front and rear sights under pressure often costs precious seconds. I was looking for a sighting system that could enhance my speed and accuracy, without the bulk of a red dot optic.

The packaging was simple, but the sight itself felt solid and well-constructed. Its compact design didn’t add noticeable weight or bulk to the slide. Compared to aftermarket adjustable iron sights I’ve used, the Meprolight FT Bullseye presented a clean, snag-free profile.

Initially, I was cautiously optimistic. The concept seemed brilliant, but I wondered if the single-point aiming system would truly translate to improved performance. I was excited to test if this could replace my aging night sights.

Real-World Testing: Putting Meprolight FT Bullseye S&W M&P Fixed Rear Tritium/Fiber Handgun Sight to the Test

First Use Experience

I first tested the Meprolight FT Bullseye at my local indoor shooting range. This offered a controlled environment to get accustomed to the sight. The difference was immediately apparent compared to standard three-dot sights.

The bright fiber optic dot was easily visible under the range’s artificial lighting. The “bullseye” effect, where the dot centers within the illuminated ring when properly aligned, felt surprisingly intuitive. Accuracy at 7 yards was comparable to my existing setup, but target acquisition felt significantly faster.

Extended Use & Reliability

After several weeks of consistent use, the Meprolight FT Bullseye has proven its worth. I have put approximately 500 rounds through my M&P. It continues to hold zero without any signs of shifting.

Durability has been impressive. The sight shows no visible wear or damage, despite repeated draws from a Kydex holster. Cleaning is straightforward. A simple wipe with a gun cleaning cloth is sufficient to remove any residue.

The Meprolight FT Bullseye has exceeded my expectations in terms of speed and ease of use. My previous night sights were effective in low light, but lacked the daytime visibility of the fiber optic. This offers the best of both worlds.

Breaking Down the Features of Meprolight FT Bullseye S&W M&P Fixed Rear Tritium/Fiber Handgun Sight

Specifications

The Meprolight FT Bullseye S&W M&P Fixed Rear Tritium/Fiber Handgun Sight is a fixed rear sight designed specifically for S&W M&P pistols. It utilizes a combination of fiber optic and tritium illumination. The sight body is constructed from durable steel.

• Fixed Rear Sight: Offers a robust and reliable aiming solution. No adjustments are needed after initial installation.
• Fiber Optic Illumination: Provides a bright, easily visible aiming point in daylight conditions. Ambient light is channeled into the fiber.
• Tritium Illumination: Ensures visibility in low-light or no-light situations. Tritium glows steadily for years without requiring batteries.
• “Bullseye” Aiming System: A unique design where a central dot aligns within an outer ring when properly sighted. This simplifies the sight picture.
• Durable Steel Construction: Withstands the rigors of daily carry and repeated use. Resists corrosion and impact damage.

These specifications are critical to the sight’s performance. The fixed design offers simplicity and reliability, while the dual illumination sources guarantee visibility in virtually any lighting condition. The “Bullseye” system simplifies aiming. This leading to faster target acquisition and greater accuracy.

Performance & Functionality

The Meprolight FT Bullseye excels at providing a fast and intuitive aiming solution. The bright fiber optic dot is easy to pick up in daylight. The tritium provides a clear aiming point in darkness. The “bullseye” effect simplifies the sight picture.

The primary strength of the Meprolight FT Bullseye is its speed. Lining up a single dot within a circle is significantly faster than aligning traditional iron sights. The only weakness I observed is that precise long-range shooting (beyond 25 yards) may be slightly more challenging.

The sight has met and exceeded my expectations for close- to medium-range engagements. It delivers on its promise of increased speed and ease of use. It instills confidence in various lighting conditions.

Design & Ergonomics

The Meprolight FT Bullseye features a low-profile, snag-free design. It prevents interference with holstering and unholstering. The sight is made of high-quality steel.

The Meprolight FT Bullseye is user-friendly. It requires no significant adjustment period. The “Bullseye” aiming system quickly becomes second nature.

Durability & Maintenance

The steel construction of the Meprolight FT Bullseye suggests excellent durability. After several weeks of use, there are no signs of wear or damage. Maintenance is minimal.

The tritium illumination has an estimated lifespan of 10-12 years. The sight should provide many years of reliable service. The rugged design suggests it will withstand demanding conditions.

Accessories and Customization Options

The Meprolight FT Bullseye S&W M&P Fixed Rear Tritium/Fiber Handgun Sight is a standalone product. It doesn’t require or directly support any accessories or customization.

The fixed design means there are no adjustable parts. The user must select the correct sight height during installation to match the specific pistol and ammunition. However, being a standard M&P rear sight dovetail, it is compatible with tools designed for M&P sight installation.

Pros and Cons of Meprolight FT Bullseye S&W M&P Fixed Rear Tritium/Fiber Handgun Sight

Check Best Price HERE

Who Should Buy Meprolight FT Bullseye S&W M&P Fixed Rear Tritium/Fiber Handgun Sight?

The Meprolight FT Bullseye is perfect for individuals prioritizing speed and ease of use in close- to medium-range engagements. This includes law enforcement officers, concealed carry permit holders, and home defense enthusiasts. It is also an excellent option for shooters with aging eyes who struggle with traditional iron sights.

This sight might not be the best choice for competitive shooters who require the ultimate in long-range precision. It would also not suit those who prefer adjustable sights for fine-tuning windage and elevation. A proper sight pusher tool is a must-have accessory for installation.

Conclusion on Meprolight FT Bullseye S&W M&P Fixed Rear Tritium/Fiber Handgun Sight

The Meprolight FT Bullseye S&W M&P Fixed Rear Tritium/Fiber Handgun Sight delivers on its promise of increased speed and ease of use. The “Bullseye” aiming system simplifies target acquisition. This makes it an excellent upgrade for anyone looking to improve their performance with an S&W M&P pistol.

At $129.99, the Meprolight FT Bullseye represents a solid value proposition. It offers a significant improvement over standard iron sights. Its dual illumination ensures visibility in all lighting conditions.

I would wholeheartedly recommend the Meprolight FT Bullseye to anyone seeking a fast, intuitive, and reliable aiming solution for their S&W M&P. Upgrade your sight picture and experience the difference!

Check Best Price HERE