Magpul MOE/CTR Cheek Riser OD Green 0.50″ Fits MOE/CTR Stocks Review

First Thoughts on the Magpul MOE/CTR Cheek Riser OD Green 0.50″ Fits MOE/CTR Stocks

The Magpul MOE/CTR Cheek Riser OD Green 0.50″ Fits MOE/CTR Stocks is a simple yet ingenious accessory designed to improve cheek weld and shooting comfort on rifles equipped with Magpul MOE or CTR stocks. For just $12.99, it promises to raise the cheek rest height by half an inch, a seemingly small adjustment that can make a world of difference in obtaining a proper sight picture and consistent accuracy. Let’s dive in and see if it lives up to the hype.

I’ve always struggled with achieving a consistent cheek weld on my M1A Scout Squad, especially when trying to use a lower-mounted optic. The factory stock forced me to crane my neck, leading to inconsistent shots and unnecessary strain. I hoped this Magpul cheek riser would offer a simple solution without requiring a complete stock replacement.

Upon receiving the Magpul MOE/CTR Cheek Riser OD Green 0.50″ Fits MOE/CTR Stocks, I was immediately impressed by its solid feel and the precise OD Green color matching my other Magpul furniture. The polymer felt robust, and the clip-on design appeared straightforward. Compared to some of the bulkier, more expensive adjustable cheek risers on the market, its slim profile and ease of installation were immediately appealing.

I considered alternatives like adjustable cheek risers with more height options, but their cost and complexity seemed overkill for my needs. The Magpul riser offered a simpler, more affordable solution for fine-tuning my cheek weld. My first impression was positive; I was excited to see if this little addition could finally solve my long-standing cheek weld woes.

Real-World Testing: Putting Magpul MOE/CTR Cheek Riser OD Green 0.50″ Fits MOE/CTR Stocks to the Test

First Use Experience

My initial test took place at my local outdoor range on a crisp autumn afternoon. I mounted the Magpul MOE/CTR Cheek Riser OD Green 0.50″ Fits MOE/CTR Stocks onto my M1A Scout Squad with a Magpul CTR stock and a low-mounted red dot sight. The installation was incredibly easy, requiring only a firm push to clip it securely into place.

The immediate improvement in my cheek weld was noticeable. I no longer had to strain my neck to get a clear sight picture. The riser placed my eye perfectly in line with the red dot, allowing for a more natural and comfortable shooting position. However, after about 50 rounds, I started to notice some slight movement of the riser.

Extended Use & Reliability

After several range trips and a few hundred rounds downrange, the Magpul MOE/CTR Cheek Riser OD Green 0.50″ Fits MOE/CTR Stocks has proven to be a valuable, but not perfect, addition. The riser has held up well in terms of durability, showing no significant signs of wear or tear. The OD Green color has remained consistent, and the polymer material has resisted scratches and abrasions.

However, the initial movement I experienced has persisted. While the riser remains securely attached, there is a slight wobble that can be felt while shooting. This doesn’t drastically affect accuracy, but it is a minor annoyance. Cleaning is simple; a quick wipe with a damp cloth is usually all it takes to remove any dirt or grime. Compared to struggling with an inadequate cheek weld, the slight movement is a worthwhile tradeoff, but I do wish it were a more solid fit.

Breaking Down the Features of Magpul MOE/CTR Cheek Riser OD Green 0.50″ Fits MOE/CTR Stocks

Specifications

• Type: Cheek Riser. This accessory elevates the shooter’s cheek weld for improved sight alignment.
• Compatibility: Magpul MOE and Magpul CTR stocks. It is designed specifically for these two popular stock models.
• Height: 0.50 inch. This is the amount the cheek weld is raised.
• Material: Polymer. A durable and lightweight material choice.
• Color: OD Green. The color matches other Magpul OD Green furniture.
• Application Note: Not for AR15/M4 platforms. The riser will interfere with the charging handle on these rifles.
• Intended Use: M14 carbine stock conversions and similar applications where a higher cheek weld is needed. This is the main design purpose of the product.
• Made in U.S.A.: Indicates domestic manufacturing.

These specifications are important because they define the intended use and limitations of the Magpul MOE/CTR Cheek Riser OD Green 0.50″ Fits MOE/CTR Stocks. The 0.50″ height increase is crucial for those needing a slight adjustment, while the AR15/M4 incompatibility is a vital consideration.

Performance & Functionality

The Magpul MOE/CTR Cheek Riser OD Green 0.50″ Fits MOE/CTR Stocks performs its primary function effectively: raising the cheek weld. This improvement directly translates to a more comfortable and consistent shooting experience, especially when using optics.

The riser’s main strength is its simplicity and ease of installation. Its weakness lies in the slight movement it exhibits during use. Ultimately, it meets expectations for a budget-friendly cheek weld solution, but falls short of perfection due to the fit issue.

Design & Ergonomics

The Magpul MOE/CTR Cheek Riser OD Green 0.50″ Fits MOE/CTR Stocks features a clean and minimalist design that integrates well with Magpul stocks. The polymer material is lightweight and comfortable against the cheek.

There’s virtually no learning curve; it’s a clip-on accessory that’s ready to go in seconds. The ergonomics are good, providing a solid and consistent cheek rest.

Durability & Maintenance

The high-quality polymer construction suggests good long-term durability. The Magpul MOE/CTR Cheek Riser OD Green 0.50″ Fits MOE/CTR Stocks seems capable of withstanding regular use and exposure to the elements.

Maintenance is minimal, requiring only occasional cleaning. Its simple design also makes it unlikely to require any repairs.

Accessories and Customization Options

The Magpul MOE/CTR Cheek Riser OD Green 0.50″ Fits MOE/CTR Stocks itself doesn’t offer any customization options. However, it’s designed to work seamlessly with Magpul MOE and CTR stocks, allowing users to further customize their rifles with other Magpul accessories like different grips, slings, and rail systems. It is worth noting that because the riser is designed to clip onto the stock, using stock mounted accessories such as sling attachments might be impacted and need to be removed or relocated.

Pros and Cons of Magpul MOE/CTR Cheek Riser OD Green 0.50″ Fits MOE/CTR Stocks

Check Best Price HERE

Who Should Buy Magpul MOE/CTR Cheek Riser OD Green 0.50″ Fits MOE/CTR Stocks?

The Magpul MOE/CTR Cheek Riser OD Green 0.50″ Fits MOE/CTR Stocks is perfect for shooters who own rifles with Magpul MOE or CTR stocks and need a slight increase in cheek weld height to improve their sight picture. This is particularly beneficial for those using optics with a lower mounting height.

This product is not ideal for AR15/M4 owners due to charging handle interference or those seeking a fully adjustable cheek riser with more height options. A must-have accessory would be a compatible Magpul MOE or CTR stock.

Conclusion on Magpul MOE/CTR Cheek Riser OD Green 0.50″ Fits MOE/CTR Stocks

The Magpul MOE/CTR Cheek Riser OD Green 0.50″ Fits MOE/CTR Stocks offers a simple and affordable solution for improving cheek weld on compatible rifles. While the slight movement during use is a drawback, the benefits of improved shooting comfort and consistency generally outweigh this issue.

At $12.99, the price is certainly justified for the value it provides. I would personally recommend it to anyone seeking a budget-friendly cheek weld adjustment for their Magpul MOE or CTR equipped rifle. Upgrade your shooting experience today with this simple yet effective accessory!

Check Best Price HERE