Let’s Talk About Magpul Industries PRS2 Extended Rubber Butt-Pad, 0 – 1 out of 2 models
For years, I’ve been customizing my rifles, always seeking that perfect fit and feel. The Magpul Industries PRS2 Extended Rubber Butt-Pad, 0 – 1 out of 2 models promised a simple solution to a common problem: length of pull. Magpul is known for quality, so I had high expectations for this seemingly small upgrade.
I’ve often found myself wishing for just a little more length on my PRS2 stock, especially when wearing heavier gear. A few extra millimeters can make a world of difference in comfort and stability, especially when shooting from awkward positions or under pressure. I needed a simple, effective way to extend the stock without compromising its integrity or adding unnecessary bulk.
The unboxing was…well, it’s a butt-pad. It came in a simple plastic bag, but the rubber felt dense and well-made. The texture seemed grippy, not slick, which was a good sign. My initial impression was that it felt like a quality piece, exactly what I’ve come to expect from Magpul.
I considered a few other options. Some adjustable stocks offered more length of pull, but they were much more expensive. Other slip-on recoil pads existed, but they often felt cheap and shifted during shooting. The Magpul Industries PRS2 Extended Rubber Butt-Pad, 0 – 1 out of 2 models seemed like the perfect compromise: a simple, durable, and relatively inexpensive solution.
I was cautiously optimistic. I’ve been burned before by small parts that didn’t quite live up to the hype. But given Magpul’s reputation and the straightforward design, I was excited to see if this could solve my length-of-pull problem on my FN FAL.
Real-World Testing: Putting Magpul Industries PRS2 Extended Rubber Butt-Pad, 0 – 1 out of 2 models to the Test
First Use Experience
My first range trip with the Magpul Industries PRS2 Extended Rubber Butt-Pad, 0 – 1 out of 2 models installed was a revelation. I tested it on my FN FAL at an outdoor range, shooting from various positions: prone, standing, and seated. The added length of pull immediately felt more comfortable, especially when wearing my tactical vest.
The slightly softer rubber also provided a bit more cushioning against recoil. It was a noticeable improvement, particularly during rapid fire strings. No amount of rain or cold can deter the need to practice. The pad remained secure and grippy, even when damp.
Installation was a breeze, literally taking less than five minutes. There were no unexpected issues, and the butt-pad fit perfectly with the existing hardware. The increased length of pull made a significant difference in my overall shooting experience.
Extended Use & Reliability
After several months of regular use, the Magpul Industries PRS2 Extended Rubber Butt-Pad, 0 – 1 out of 2 models has held up admirably. There are no signs of tearing or significant wear, even after being exposed to sun, rain, and the occasional bump against hard surfaces. It still looks and performs like new.
Cleaning is simple: a quick wipe-down with a damp cloth removes any dirt or debris. I haven’t needed to use any special cleaners or protectants. The rubber seems resistant to most common solvents and oils.
Compared to the original butt-pad, the Magpul Industries PRS2 Extended Rubber Butt-Pad, 0 – 1 out of 2 models is a clear upgrade. The extended length provides a more comfortable and stable shooting platform. It has proven to be a durable and reliable addition to my rifle.
Breaking Down the Features of Magpul Industries PRS2 Extended Rubber Butt-Pad, 0 – 1 out of 2 models
Specifications
The Magpul Industries PRS2 Extended Rubber Butt-Pad, 0 – 1 out of 2 models is designed to replace the standard rubber butt-pad on Magpul PRS2 stocks. It is compatible with PRS2 FN FAL and HK G3/91 models, as well as all Bushmaster ACR stocks. The key specification is the added length: approximately 0.50″ increase in length of pull. It mounts using existing hardware, making installation quick and simple.
The added length of pull is crucial for achieving a proper cheek weld and comfortable shooting posture. A slightly longer stock can make a significant difference in accuracy and recoil management. The durable rubber construction ensures a secure and comfortable interface with the shooter’s shoulder.
Performance & Functionality
The Magpul Industries PRS2 Extended Rubber Butt-Pad, 0 – 1 out of 2 models performs its job perfectly: it extends the length of pull and provides a more comfortable shooting experience. The added length allows for better cheek weld and improved control, especially when wearing bulky gear. There are no weaknesses; it’s a simple product that does exactly what it’s designed to do.
It exceeded my expectations. I was hoping for a minor improvement, but the difference was surprisingly noticeable. The extra half-inch of length made a significant positive impact on my shooting accuracy and comfort.
Design & Ergonomics
The Magpul Industries PRS2 Extended Rubber Butt-Pad, 0 – 1 out of 2 models is made from high-quality, durable rubber. The material feels solid and well-made. It’s designed to be lightweight and not add significant bulk to the rifle.
Installation is incredibly user-friendly. No special tools or gunsmithing skills are required. The butt-pad fits seamlessly with the existing stock and hardware.
Durability & Maintenance
Given the durable rubber construction, the Magpul Industries PRS2 Extended Rubber Butt-Pad, 0 – 1 out of 2 models should last for years under normal use. The material is resistant to wear, tear, and most common chemicals.
Maintenance is minimal. A quick wipe-down with a damp cloth is all that’s needed to keep it clean and functional. No special repair or maintenance is required.
Accessories and Customization Options
The Magpul Industries PRS2 Extended Rubber Butt-Pad, 0 – 1 out of 2 models is an accessory in itself, designed to enhance the Magpul PRS2 stock. It doesn’t require any additional accessories for installation or use. However, consider this as one step in fully customizing the rifle to best fit the user. It is compatible with existing cheek risers and other accessories designed for the PRS2 stock.
Pros and Cons of Magpul Industries PRS2 Extended Rubber Butt-Pad, 0 – 1 out of 2 models
Pros
- Simple and easy installation. Installation literally takes minutes and requires no specialized tools.
- Durable and high-quality construction. The rubber material feels solid and is built to last.
- Noticeable improvement in length of pull. The added half-inch makes a significant difference in comfort and control.
- Enhanced recoil absorption. The slightly softer rubber provides a bit more cushioning against recoil.
- Affordable upgrade. The price is reasonable for the benefits it provides.
Cons
- Limited compatibility. Only works with specific stock models (PRS2, ACR).
- Minimal adjustment. Offers a fixed extension, not adjustable length of pull.
Who Should Buy Magpul Industries PRS2 Extended Rubber Butt-Pad, 0 – 1 out of 2 models?
This Magpul Industries PRS2 Extended Rubber Butt-Pad, 0 – 1 out of 2 models is perfect for shooters with longer arms or those who wear bulky tactical gear. If you own a rifle with a Magpul PRS2 stock, a Bushmaster ACR, or an FN FAL or HK G3/91 variant with an adapted stock, and find the length of pull slightly short, this is an excellent and inexpensive solution. It’s also ideal for shooters who want a bit more recoil absorption without adding significant weight or bulk.
Those who should skip this product are shooters who already have a comfortable length of pull with their stock. Also, if you need an adjustable length of pull to accommodate different shooting positions or multiple users, a different stock or adjustable cheek piece would be a better option.
A must-have modification would be a good cheek riser to ensure proper sight alignment with the added length of pull.
Conclusion on Magpul Industries PRS2 Extended Rubber Butt-Pad, 0 – 1 out of 2 models
The Magpul Industries PRS2 Extended Rubber Butt-Pad, 0 – 1 out of 2 models is a simple but effective upgrade. It addresses a common issue – insufficient length of pull – with a durable, affordable, and easy-to-install solution. The price of $13.95 is more than justified by the noticeable improvement in comfort and control.
I would personally recommend this product to anyone who owns a compatible rifle and finds the stock slightly short. It’s a small investment that can make a big difference in your shooting experience. If you want to improve your comfort, accuracy, and recoil management without breaking the bank, grab a Magpul Industries PRS2 Extended Rubber Butt-Pad, 0 – 1 out of 2 models and see for yourself!