The M17/M18 Optics Mounting Plate With Acro Made a Bold First Impression
The M17/M18 Optics Mounting Plate With Acro promises to seamlessly integrate the exceptionally capable Aimpoint Acro optic onto Sig Sauer’s flagship pistols. This offering from Sig Sauer bridges the gap between two highly respected brands and promises enhanced performance. As a long-time firearms enthusiast and tactical gear specialist, I was eager to see if this plate lived up to the hype. My own M17 had been sitting with iron sights for far too long, and the Acro has always been a favorite of mine.
For years, I’ve grappled with finding the perfect red dot mounting solution for my M17. Traditional methods often involved aftermarket slides or machining, options that were either too costly or irreversible. The M17/M18 Optics Mounting Plate With Acro presented a potential solution that required no permanent modifications and offered a direct mounting point for my beloved Acro. This approach seemed the most sensible and straightforward, promising a cleaner setup.
Upon receiving the plate, I was immediately impressed by its robust construction. The black finish was even and seemed incredibly durable. The weight, listed at 1.15 lbs, felt substantial, suggesting a solid build quality ready to withstand the rigors of recoil. It appeared to be meticulously crafted, inspiring confidence in its ability to secure the optic.
Compared to universal mounting plates I’ve used in the past, this Sig Sauer plate felt purpose-built and decidedly more refined. Those universal options often required shimming or presented a less-than-perfect fit, leading to potential zeroing issues. This M17/M18 Optics Mounting Plate With Acro seemed to offer a far more stable and reliable mounting solution. I also considered having the slide milled for a direct Acro cut but opted for the plate to retain the original slide’s integrity.
My initial impression was one of cautious optimism. While the weight seemed high, the build quality instilled confidence. I was eager to install the plate and test its performance at the range to see if it truly lived up to its promise. I couldn’t wait to experience the combined performance of my M17 and Acro.
Real-World Testing: Putting **M17/M18 Optics Mounting Plate With Acro** to the Test
First Use Experience
I took my M17, equipped with the M17/M18 Optics Mounting Plate With Acro and my Aimpoint Acro, to my local shooting range. The range offered a controlled environment for initial testing and zeroing. I wanted to ensure the plate maintained zero under repeated firing.
The weather was clear but a bit windy, providing a slight crosswind challenge. The installation was straightforward, taking only a few minutes with the proper tools. After initial adjustments, the Acro sighted in quickly. I fired approximately 200 rounds of 9mm ammunition. The plate held firm, and my zero remained consistent throughout the session. The added height did take a little getting used to.
I did encounter a minor issue: the screws securing the Acro to the plate required frequent checking due to the recoil. This wasn’t a deal-breaker, but something I needed to monitor closely. Overall, the first range session was positive, showing the potential of this mounting system.
<h3>Extended Use & Reliability</h3>After several months of consistent use, including weekly range sessions and a local pistol competition, the M17/M18 Optics Mounting Plate With Acro has proven to be fairly reliable. It has now seen over 1000 rounds. The plate itself shows no signs of structural wear.
However, the finish has started to show some wear around the edges, particularly where it interfaces with the slide. I’ve also noticed that the screws still require periodic tightening, despite using thread locker. Proper cleaning and lubrication are essential to prevent any rust or corrosion, particularly in humid environments. The increased height of the optic is taking more time to get used to than I anticipated.
Compared to other mounting solutions I’ve used, this plate offers a good balance of convenience and reliability. It is not as robust as a direct slide mill, but it provides a viable alternative for those who want to retain the original slide. Overall, it has performed adequately, but I still have reservations about the need for constant screw maintenance.
Breaking Down the Features of **M17/M18 Optics Mounting Plate With Acro**
Specifications
The M17/M18 Optics Mounting Plate With Acro is specifically designed for the Sig Sauer P320 M17 and M18 pistols. The plate is finished in black. It is intended to fit the Aimpoint Acro series of optics.
The plate’s height measures approximately 0.21 inches, adding a minimal but noticeable increase to the optic’s overall height. Its weight is listed at 1.15 lbs. The materials used are not explicitly stated, but the plate appears to be constructed from high-strength steel to withstand recoil forces.
These specifications directly impact the user experience. The height affects the sight picture and may require taller iron sights for co-witnessing. The weight, while adding stability, also increases the pistol’s overall mass, which can be a concern for concealed carry. The compatibility solely with the Aimpoint Acro limits the user to a specific optic.
<h3>Performance & Functionality</h3>The primary function of the M17/M18 Optics Mounting Plate With Acro is to provide a stable and secure platform for mounting an Aimpoint Acro optic. When properly installed, it achieves this goal reasonably well. The plate maintains zero under moderate firing conditions.
However, the need for frequent screw tightening is a significant weakness. This issue undermines the plate’s overall reliability and requires constant vigilance. While it meets basic expectations, it falls short of being a truly set-and-forget solution.
<h3>Design & Ergonomics</h3>The M17/M18 Optics Mounting Plate With Acro features a low-profile design. The intent is to minimize bulk. The black finish blends seamlessly with the pistol’s slide.
The build quality is decent, with clean lines and precise machining. However, the added height does impact the overall ergonomics, making it slightly more difficult to acquire a quick sight picture. There is a slight learning curve involved in adapting to the higher optic position.
<h3>Durability & Maintenance</h3>The plate itself appears to be durable, with no signs of cracking or bending after several months of use. However, the finish is prone to wear and tear, particularly around the edges. Regular cleaning and lubrication are necessary to prevent corrosion and maintain optimal performance.
Replacing the screws with higher-quality alternatives might improve the reliability of the optic mounting. Overall, the durability is acceptable, but the finish could be more resistant to wear.
<h3>Accessories and Customization Options</h3>The M17/M18 Optics Mounting Plate With Acro does not come with any additional accessories beyond the mounting screws. It is designed specifically for the Aimpoint Acro series and offers limited customization options. Taller iron sights may be required for co-witnessing, depending on personal preference.
Compatibility with other brands is non-existent, as it is specifically tailored for the Acro footprint and the Sig Sauer M17/M18 slide. This lack of versatility is a significant limitation for those who prefer other optic brands or mounting styles. Therefore, customization is limited to the specific optic it supports.
Pros and Cons of **M17/M18 Optics Mounting Plate With Acro**
Pros
- Provides a dedicated mounting solution for Aimpoint Acro optics on Sig Sauer M17/M18 pistols. This eliminates the need for custom slide work.
- Relatively easy to install, requiring only basic tools and minimal gunsmithing knowledge. It allows users to mount an optic quickly.
- Maintains zero adequately under moderate firing conditions, offering acceptable accuracy for most applications. It is suitable for range use and some competition.
- The plate’s low-profile design minimizes bulk and integrates seamlessly with the pistol’s aesthetics. This maintains the pistol’s original lines.
- The solid construction gives users confidence that it will resist recoil and hold zero reliably.
Cons
- Requires frequent screw tightening to maintain optic security, which is a significant inconvenience. This necessitates constant monitoring.
- Adds noticeable height to the optic, which affects sight picture and may require taller iron sights. It can also change the overall feel of the pistol.
- Limited to Aimpoint Acro optics only. This restricts users who prefer other brands or mounting styles.
Who Should Buy **M17/M18 Optics Mounting Plate With Acro**?
The M17/M18 Optics Mounting Plate With Acro is perfect for Sig Sauer M17/M18 owners who already own an Aimpoint Acro and want a relatively simple way to mount it. It suits those who prefer not to permanently modify their slide through milling. It’s also good for recreational shooters and those who occasionally participate in pistol competitions.
Those who should skip this product include individuals seeking a bombproof mounting solution for demanding applications, like duty use or extreme competitive shooting. Also, those unwilling to monitor and tighten screws regularly should avoid this plate. Users who want the option to use multiple optics brands should also look elsewhere.
Must-have accessories or modifications include a high-quality thread locker and possibly taller iron sights for co-witnessing. Using a torque wrench to precisely tighten the screws is also recommended. Some users may also want to consider aftermarket screws with a more aggressive thread pattern for better retention.
Conclusion on **M17/M18 Optics Mounting Plate With Acro**
The M17/M18 Optics Mounting Plate With Acro offers a decent, albeit imperfect, solution for mounting an Aimpoint Acro on a Sig Sauer M17 or M18 pistol. It is a convenient alternative to permanent slide modifications, but the need for frequent screw tightening is a significant drawback. The 0.21″ height addition is also a factor to consider.
Whether the price (when available) is justified depends on individual priorities. If convenience and preserving the original slide are paramount, it may be worthwhile. However, those seeking ultimate reliability may find other options more appealing. It is not available for purchase at the time of this review.
Personally, I would recommend it with reservations. It serves its purpose, but requires diligent maintenance. If you are considering adding an Acro to your M17/M18 and are willing to accept its limitations, it could be a viable option. However, research alternatives thoroughly before committing.
