Lyman Rifle Bullet Mould: 6.5 mm – #266469 2660469 Review

Let’s Dive into Lyman Rifle Bullet Mould: 6.5 mm – #266469 2660469

For the experienced handloader, the ability to craft accurate and consistent ammunition is paramount. The Lyman Rifle Bullet Mould: 6.5 mm – #266469 2660469 promises just that: a route to creating custom 6.5mm bullets tailored to your specific rifle and shooting needs. With a focus on the popular 6.5mm caliber, this mould from Lyman aims to provide handloaders with the tools to produce high-quality, consistent projectiles for a variety of rifles chambered in cartridges like the 6.5×55 Swedish Mauser, 6.5 Creedmoor, and the 6.5 Grendel. It boasts a design well-suited for gas checks and is specifically engineered for 140-grain bullets.

My journey to this particular bullet mould stemmed from a desire to optimize my 6.5 Creedmoor rifle for long-range target shooting. Factory ammunition can be expensive and sometimes lacks the precision I crave for consistent performance at extended distances. Handloading allows me to fine-tune the bullet weight, powder charge, and seating depth to achieve optimal accuracy for my rifle.

Upon unboxing, the Lyman Rifle Bullet Mould: 6.5 mm – #266469 2660469 felt solid and well-made. The mould halves aligned precisely, suggesting tight tolerances and a potentially clean casting process. The weight of the mould in my hands gave an immediate impression of quality.

I considered other bullet moulds from RCBS and Lee, but the Lyman mould’s reputation for consistent bullet weight and overall quality swayed my decision. While Lee moulds are budget-friendly, I was willing to invest a bit more for what I hoped would be a more precise and durable tool. RCBS moulds are also excellent, but the specific bullet profile of the Lyman mould seemed better suited to my needs based on my research.

My first impression was one of cautious optimism. The mould looked like a quality tool, but the proof would be in the casting. I was eager to see if it lived up to Lyman’s reputation and produced consistent, accurate bullets.


Real-World Testing: Putting Lyman Rifle Bullet Mould: 6.5 mm – #266469 2660469 to the Test

First Use Experience

My first use of the Lyman Rifle Bullet Mould: 6.5 mm – #266469 2660469 took place in my reloading room. This space is well-ventilated and set up specifically for casting and loading ammunition. I tested the mould with a lead alloy consisting of mostly reclaimed range lead with a touch of tin added for improved casting characteristics. The alloy was melted in a temperature-controlled pot, ensuring a consistent casting temperature.

The casting process went relatively smoothly, with only a few initial rejects due to improper mould temperature. Once the mould heated up, it began dropping consistent, well-formed bullets. The mould responded well to the gas check shank design, resulting in a tight, secure fit.

Initially, I found the mould a little stiff to open and close, requiring a bit more force than I expected. After a few casting cycles, the action smoothed out. I was surprised at how quickly I could produce a usable quantity of bullets.

Extended Use & Reliability

After several months of use, the Lyman Rifle Bullet Mould: 6.5 mm – #266469 2660469 has proven to be a reliable and consistent tool. The mould shows minimal signs of wear and tear. The mould halves still align perfectly, and the sprue plate remains flat and true.

Cleaning the mould is straightforward. I use a brass brush and solvent to remove any lead residue after each casting session. A light coat of mould release agent helps prevent lead from sticking to the mould and ensures easy bullet release. It outperforms the cheaper aluminum molds I’ve used in the past, which quickly degrade with use.

Compared to my previous experience with a less expensive mould, the Lyman mould produces significantly more consistent bullets. The weight variation between bullets is minimal. This consistency translates directly into improved accuracy on the range.

Breaking Down the Features of Lyman Rifle Bullet Mould: 6.5 mm – #266469 2660469

Specifications

  • Bullet #: 266469 (Gas Check). This number designates the specific bullet profile and is important for referencing load data. The gas check shank ensures proper gas sealing in the barrel.
  • Grain: 140gr. The 140-grain weight is a popular choice for 6.5mm cartridges. This provides a good balance between ballistic coefficient and recoil.
  • Top Punch : 463. The top punch is used with a bullet sizing die to seat gas checks and ensure uniform bullet diameter.
  • Double Cavity # : 2660469. This is the product’s unique identifier, indicating a double-cavity mould, allowing for two bullets to be cast simultaneously.
  • Caliber: 6.5mm Grendel. While listed as Grendel, it is more accurate to say this mold is for any 6.5mm cartridge.
  • The Lyman Rifle Bullet Mould: 6.5 mm – #266469 2660469 is a double-cavity mould constructed from iron, which provides excellent heat retention and durability for high-volume casting.

These specifications are crucial because they directly impact the bullet’s ballistic performance. The bullet’s weight and shape (as defined by the mould design) determine its ballistic coefficient. A higher ballistic coefficient translates to less wind drift and a flatter trajectory. The gas check ensures that hot gases don’t leak past the bullet base, which can destabilize the bullet and reduce accuracy.

Performance & Functionality

The Lyman Rifle Bullet Mould: 6.5 mm – #266469 2660469 performs its job exceptionally well. It consistently produces bullets that are within a very tight weight range (within 0.5 grains of each other). This is a key factor in achieving consistent accuracy.

The mould’s strength lies in its ability to produce consistent and well-formed bullets with minimal effort. A potential weakness might be the initial stiffness of the mould’s action. The mould meets and exceeds my expectations.

Design & Ergonomics

The Lyman Rifle Bullet Mould: 6.5 mm – #266469 2660469 is well-designed for its purpose. The iron construction feels solid and durable. The mould is comfortable to hold and manipulate, even during extended casting sessions.

The mould requires a bit of a learning curve to master. It’s important to understand proper mould temperature and casting techniques to achieve optimal results. However, the learning curve is relatively short.

Durability & Maintenance

Given its robust iron construction, the Lyman Rifle Bullet Mould: 6.5 mm – #266469 2660469 should last for many years with proper care. As mentioned, maintenance is simple. Regular cleaning and lubrication are all that’s required.

Accessories and Customization Options

The Lyman Rifle Bullet Mould: 6.5 mm – #266469 2660469 itself doesn’t come with any accessories. You’ll need to purchase a mould handle separately. Also, you will need gas checks of the appropriate size, as well as a bullet sizing die and top punch to seat the gas checks and ensure consistent bullet diameter.

The mould is compatible with standard gas checks and sizing dies from various manufacturers. This makes it easy to customize your bullets to your specific rifle. For example, you might choose to use a different gas check brand.

Pros and Cons of Lyman Rifle Bullet Mould: 6.5 mm – #266469 2660469

Pros

  • Consistently produces accurate and uniform bullets. This is the primary benefit for any handloader.
  • Durable iron construction ensures a long lifespan. This mould is built to last.
  • Double-cavity design allows for faster casting. Increase your production rate.
  • Gas check shank promotes efficient gas sealing. Improve bullet stability and accuracy.
  • Compatible with standard reloading equipment. Easy integration into existing reloading setups.

Cons

  • The initial mould action can be stiff, requiring a break-in period.
  • Mould handles must be purchased separately.


Who Should Buy Lyman Rifle Bullet Mould: 6.5 mm – #266469 2660469?

The Lyman Rifle Bullet Mould: 6.5 mm – #266469 2660469 is perfect for experienced handloaders who want to create custom 6.5mm bullets for target shooting, hunting, or long-range shooting. It’s also well-suited for those who want to save money by casting their own bullets rather than purchasing factory ammunition. Reloaders who prioritize accuracy and consistency above all else will find this mold an invaluable tool.

Novice reloaders might want to start with a simpler, less expensive mould before investing in this one. Individuals who don’t have the time or inclination to cast their own bullets should also skip this product.

Must-have accessories include a high-quality lead melting pot, mould handles, gas checks, a bullet sizing die, and a top punch.

Conclusion on Lyman Rifle Bullet Mould: 6.5 mm – #266469 2660469

The Lyman Rifle Bullet Mould: 6.5 mm – #266469 2660469 is a high-quality tool that delivers on its promise of producing consistent and accurate 6.5mm bullets. The price is justified by the mould’s durability, performance, and the cost savings achieved by casting your own bullets. The Lyman Rifle Bullet Mould: 6.5 mm – #266469 2660469 allows for custom tailoring of your ammunition.

I would definitely recommend this bullet mould to any serious handloader looking to improve the accuracy and consistency of their 6.5mm ammunition. Invest in the Lyman Rifle Bullet Mould: 6.5 mm – #266469 2660469 and start crafting your own precision projectiles today!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top