Let’s Dive into Lyman Quick Slick Pump Spray Case Lube 16 oz
For those who spend countless hours at the reloading bench, the quest for efficiency and precision is never-ending. That’s where Lyman Quick Slick Pump Spray Case Lube 16 oz comes in. This isn’t your grandfather’s messy, sticky case lube; it’s a modern solution designed to streamline the case resizing process.
I’ve been reloading for over a decade, wrestling with everything from sticky sizing dies to inconsistent results. I needed a consistent and easy-to-apply lubricant that wouldn’t contaminate my powder or primers.
My first impression was positive. The large 16 oz pump bottle seemed practical and the spray nozzle promised even distribution. Compared to messy wax-based lubes or aerosol cans that run out quickly, the Lyman Quick Slick felt like a step up. I chose it over Hornady One Shot and RCBS Case Lube 2 because of the pump action aiming for better control and less waste.
Out of the box, I was excited. The pump spray seemed like a cleaner, more efficient way to lube cases, promising to cut down on prep time and improve sizing consistency.
Real-World Testing: Putting Lyman Quick Slick Pump Spray Case Lube 16 oz to the Test
First Use Experience
I first tested the Lyman Quick Slick while reloading .223 Remington for my AR-15 at my home reloading bench. The conditions were fairly typical – a controlled indoor environment. I sprayed a batch of 50 cases laid out in a loading tray, using two to three pumps per tray.
The ease of use was immediately apparent. The pump action provided a consistent spray, and I felt I had more control over the amount of lubricant applied compared to aerosol alternatives. However, even with careful application, some cases seemed to have an uneven coating.
After the first resizing session, I noticed a slight increase in effort required for some cases. A couple cases seemed to stick slightly more than others, but none were catastrophic failures.
Extended Use & Reliability
After several weeks and hundreds of rounds reloaded, I’ve developed a better feel for the Lyman Quick Slick. It holds up well under consistent use, though I’ve noticed some build-up of the lubricant on the sizing die after prolonged sessions. A quick wipe-down with a clean cloth resolves this issue.
There are no visible signs of wear and tear on the pump bottle itself. Maintenance is minimal – just wiping down the nozzle occasionally to prevent clogging.
Compared to my previous wax-based lube, the Lyman Quick Slick is significantly cleaner and easier to apply. However, it doesn’t quite match the slickness of some high-end aerosol lubes when those are applied perfectly. The “perfectly” part is the issue though, those are easy to over-apply and waste.
Breaking Down the Features of Lyman Quick Slick Pump Spray Case Lube 16 oz
Specifications
- Manufacturer: Lyman.
- Product Name: Lyman Quick Slick Pump Spray Case Lube 16 oz.
- Quantity: One 16 oz pump spray bottle.
- The 16 oz quantity offers a significant volume for reloaders who process large batches of cases, offering cost-effectiveness and reducing the frequency of replacements.
- The pump spray mechanism allows for targeted and controlled application, minimizing waste and overspray.
These specifications are important because they directly impact the reloading process. The pump spray design offers better control and targeted application, crucial for consistent sizing and preventing case sticking.
Performance & Functionality
The Lyman Quick Slick Pump Spray Case Lube 16 oz performs adequately when applied correctly. It reduces friction during case sizing, helping to prevent cases from sticking in the die.
However, it’s not a “one-size-fits-all” solution. Over-application can lead to sticky dies, while under-application can result in stuck cases. Achieving the right balance requires some experimentation and experience.
It meets expectations for basic case lubrication but doesn’t necessarily exceed them. It’s a good, reliable lube for high-volume reloading, but it might not be the best choice for extremely tight-tolerance cartridges or very stubborn cases.
Design & Ergonomics
The pump bottle is functional and easy to handle. The pump mechanism delivers a consistent spray with minimal effort.
The design is straightforward. There’s no learning curve involved – simply point and spray.
Durability & Maintenance
The pump bottle appears to be durable and well-constructed. The plastic is thick and resistant to cracking, even after repeated use.
Maintenance is minimal. Wiping down the nozzle after each use is usually sufficient to prevent clogging.
Accessories and Customization Options
The Lyman Quick Slick Pump Spray Case Lube 16 oz doesn’t come with any accessories. It’s a standalone product.
There are no customization options. It is designed for direct application to the cases. However, it is compatible with most standard reloading dies.
Pros and Cons of Lyman Quick Slick Pump Spray Case Lube 16 oz
Pros
- Large 16 oz bottle provides excellent value for high-volume reloaders.
- Pump spray design allows for controlled and targeted application, minimizing waste.
- Reduces friction during case sizing, preventing stuck cases when used correctly.
- Cleaner and less messy compared to traditional wax-based lubes.
- Compatible with most standard reloading dies.
Cons
- Requires some experimentation to find the optimal amount of lubricant for different cartridges.
- Over-application can lead to sticky dies.
- May not be as slick as some high-end aerosol lubes when aerosol lubes are perfectly applied.
Who Should Buy Lyman Quick Slick Pump Spray Case Lube 16 oz?
The Lyman Quick Slick Pump Spray Case Lube 16 oz is perfect for high-volume reloaders who process large batches of cases regularly. It’s also a good choice for reloaders who prefer a cleaner and less messy alternative to wax-based lubes.
Reloaders who are extremely meticulous and demand the absolute slickest lubrication might prefer high-end aerosol lubes. Also, reloaders who only process a few cases at a time may find the large 16 oz bottle to be overkill.
A loading block to hold cases during spraying and a clean cloth for wiping down dies are must-have accessories.
Conclusion on Lyman Quick Slick Pump Spray Case Lube 16 oz
The Lyman Quick Slick Pump Spray Case Lube 16 oz is a solid, reliable case lube that offers good value for the price. The pump spray design provides controlled application, and the large 16 oz bottle ensures a long-lasting supply.
The price is certainly justified, considering the quantity and convenience. It’s a worthy investment for any serious reloader.
I would personally recommend it to reloaders who are looking for a cleaner, more efficient way to lube their cases. Give it a try and streamline your reloading process today!