The Leupold RIFLEMAN 2-PC REM 700 MT Made a Bold First Impression
Choosing the right mounting system for your rifle is as crucial as selecting the optic itself. After all, a world-class scope is useless if it can’t reliably stay zeroed. I’ve been mounting scopes on various platforms for over a decade, and the Leupold RIFLEMAN 2-PC REM 700 MT caught my attention with its promise of rugged dependability and affordability.
My Remington 700 in .30-06 needed a solid, no-nonsense mounting solution. The factory bases were showing their age, and I wanted something I could trust for upcoming deer season. I was seeking a straightforward mounting system, without the bells and whistles that often drive up the price.
The Leupold RIFLEMAN 2-PC REM 700 MT arrived in a simple, functional package. Immediately, I appreciated the minimalist design; it felt like a return to basics, focusing on durability rather than aesthetics. The matte black finish was clean, and the steel construction instilled confidence.
I considered a one-piece base from another manufacturer, but the two-piece design of the Leupold RIFLEMAN 2-PC REM 700 MT offered a bit more flexibility in scope placement. Another option was a pricier set of rings and bases from Nightforce, but for my specific hunting needs, the extra cost didn’t seem justified. My first impression was positive: a simple, rugged, and affordable mounting solution that seemed perfectly suited for my Remington 700. I was eager to see how it performed in the field.
Real-World Testing: Putting Leupold RIFLEMAN 2-PC REM 700 MT to the Test
First Use Experience
I installed the Leupold RIFLEMAN 2-PC REM 700 MT on my Remington 700 .30-06 in preparation for deer season, sighting in at my local range. The initial mounting process was straightforward, although I made sure to use a torque wrench to achieve the recommended screw torque. This is crucial for consistent accuracy and preventing damage to the receiver.
The weather was typical for late fall: cold and damp, with a light drizzle. The Leupold bases performed admirably. After confirming my zero at 100 yards, I stretched out to 200 and 300 yards with consistent results.
There were no surprises or immediate issues. The scope held zero flawlessly. The simplicity of the setup allowed me to focus on my shooting fundamentals, rather than worrying about the equipment.
Extended Use & Reliability
After several months of use, including a successful deer season and numerous range trips, the Leupold RIFLEMAN 2-PC REM 700 MT has held up remarkably well. There are no signs of wear or loosening of the screws. The matte black finish has proven to be durable and resistant to scratches.
Maintenance has been minimal. After each range session or hunting trip, I simply wipe down the bases with a lightly oiled cloth to prevent rust. Compared to some of the more complex mounting systems I’ve used in the past, this is a welcome change. It certainly outperforms the factory bases that came with my rifle initially.
Breaking Down the Features of Leupold RIFLEMAN 2-PC REM 700 MT
Specifications
Constructed from durable steel, the Leupold RIFLEMAN 2-PC REM 700 MT provides a solid foundation for mounting your scope. Steel ensures consistent performance under recoil and varying temperatures.
The two-piece design offers mounting versatility. This allows for better scope placement and ejection port access.
Designed specifically for Remington 700 rifles, these bases ensure a perfect fit. Compatibility is essential for secure and accurate mounting.
The matte black finish reduces glare and blends seamlessly with most rifles and scopes. This finish provides a non-reflective surface for stealth in the field.
These bases accept Leupold RIFLEMAN rings, which are sold separately. The ring compatibility simplifies the scope mounting process.
Performance & Functionality
The Leupold RIFLEMAN 2-PC REM 700 MT performs its job admirably. It provides a rock-solid mounting platform for my scope, ensuring consistent accuracy. The system is exceptionally reliable, with no noticeable shift in zero after repeated firing.
The primary strength lies in its simplicity and dependability. There are no complex adjustments or fragile components to worry about. A potential weakness might be the lack of integrated recoil lugs found on some more expensive bases, but this hasn’t been an issue in my experience. The Leupold RIFLEMAN 2-PC REM 700 MT exceeds expectations for a base at this price point.
Design & Ergonomics
The Leupold RIFLEMAN 2-PC REM 700 MT features a straightforward, functional design. The steel construction provides a reassuringly solid feel, while the matte black finish is both durable and aesthetically pleasing. Installation is simple and intuitive, requiring only basic tools and a torque wrench.
The low-profile design minimizes interference with the rifle’s handling. The absence of sharp edges or protrusions enhances user comfort. There is essentially no learning curve; anyone familiar with basic scope mounting can install these bases with ease.
Durability & Maintenance
The Leupold RIFLEMAN 2-PC REM 700 MT, made of steel, is built to last. These bases should provide years of reliable service with proper care. Maintenance is minimal, requiring only occasional cleaning and lubrication to prevent rust.
The simple design eliminates the need for complex repairs. The Leupold RIFLEMAN 2-PC REM 700 MT exemplifies robust construction and easy upkeep.
Accessories and Customization Options
The Leupold RIFLEMAN 2-PC REM 700 MT bases require compatible rings, specifically Leupold RIFLEMAN rings, which are sold separately. There aren’t significant customization options for the bases themselves. You can choose ring heights to accommodate different scope diameters and objective lens sizes.
The compatibility with Leupold RIFLEMAN rings ensures a secure and reliable scope mounting system. Some shooters may opt for aftermarket screws for added security, but this is generally not necessary.
Pros and Cons of Leupold RIFLEMAN 2-PC REM 700 MT
Pros
- Affordable price point making it accessible to a wide range of shooters.
- Durable steel construction ensures long-lasting performance and reliability.
- Simple and easy installation process, even for those with limited experience.
- Compatible with Leupold RIFLEMAN rings, offering a complete mounting solution.
- Reliably maintains zero, even under heavy recoil.
Cons
- Requires separate purchase of Leupold RIFLEMAN rings.
- Lacks integrated recoil lugs, which some may prefer for added security.
Who Should Buy Leupold RIFLEMAN 2-PC REM 700 MT?
The Leupold RIFLEMAN 2-PC REM 700 MT is perfect for hunters and recreational shooters seeking a reliable and affordable scope mounting solution for their Remington 700 rifles. It’s also an excellent choice for those who prefer a simple and straightforward design over more complex and expensive mounting systems. This is ideal for anyone looking to upgrade their factory bases without breaking the bank.
Competitive shooters who demand the absolute highest level of precision might prefer a more feature-rich mounting system with integrated recoil lugs and more precise adjustability. Those who prioritize aesthetics above all else might find the minimalist design lacking. A must-have accessory is a quality torque wrench to ensure proper screw tension during installation.
Conclusion on Leupold RIFLEMAN 2-PC REM 700 MT
The Leupold RIFLEMAN 2-PC REM 700 MT offers exceptional value for the money. It provides a durable and reliable mounting platform for your scope without the high price tag of more specialized systems. The price is absolutely justified given the performance and durability.
I would definitely recommend the Leupold RIFLEMAN 2-PC REM 700 MT to anyone looking for a solid, no-nonsense scope mounting solution for their Remington 700. If you need a dependable base that won’t break the bank, this is it. Upgrade your rifle today and experience the reliability of Leupold.