Let’s Dive into Lee Double Cavity Bullet Mold 358-150-1R 90328
The Lee Double Cavity Bullet Mold 358-150-1R 90328 is a tool designed for reloaders who want to cast their own .38 caliber bullets, specifically a 150-grain round nose projectile. Manufactured by Lee, this mold promises to deliver consistent results, allowing reloaders to tailor their ammunition to specific needs and preferences. This particular mold has caught my eye due to my growing interest in casting my own bullets for my .38 Special revolver.
I’ve always been fascinated by the reloading process, and the idea of crafting my own ammunition from scratch has been particularly appealing. The rising cost of commercially manufactured ammunition pushed me to explore the possibility of casting my own bullets. I was searching for a reliable and affordable mold that could produce consistent and accurate bullets for target practice.
My initial impression upon unboxing the Lee Double Cavity Bullet Mold 358-150-1R 90328 was that it felt solid and well-constructed for its price point. The mold blocks were clean and the handles seemed sturdy enough for the job. The mold didn’t feel overly heavy, which is important when you are casting multiple bullets in one session.
I considered the Lyman 358477 and the RCBS 38-150-RN molds, both respected names in bullet casting. I ultimately chose the Lee mold due to its more budget-friendly price and the positive reviews highlighting its ease of use for beginners. I wanted a mold that was simple to use and reliable, and the Lee Double Cavity Bullet Mold 358-150-1R 90328 seemed to fit the bill perfectly.
My first impression was one of cautious optimism. I was eager to get started and see if the Lee Double Cavity Bullet Mold 358-150-1R 90328 could live up to its reputation. I hoped it would be a reliable and accurate tool that would allow me to produce consistent and cost-effective bullets for my .38 Special.
Real-World Testing: Putting Lee Double Cavity Bullet Mold 358-150-1R 90328 to the Test
First Use Experience
I tested the Lee Double Cavity Bullet Mold 358-150-1R 90328 in my garage, which I’ve converted into a small reloading workshop. The weather was a comfortable 70 degrees with low humidity, ideal for casting.
The Lee Double Cavity Bullet Mold performed well, casting consistently shaped bullets. The mold heated up quickly and maintained a stable temperature.
It took a few casts to get the hang of the sprue plate operation and consistent fill of both cavities. I had a few wrinkled bullets initially, but after adjusting my pouring technique and the mold temperature, I was able to produce clean, well-formed projectiles. There were no major issues and the mold was relatively easy to use.
Extended Use & Reliability
After several weeks of casting sessions, the Lee Double Cavity Bullet Mold 358-150-1R 90328 continues to perform admirably. The mold blocks still align perfectly and the sprue plate operates smoothly.
I have noticed some slight discoloration of the aluminum mold blocks with use, but this is purely cosmetic and doesn’t affect performance. The mold is easy to clean with a wire brush and solvent after each casting session, ensuring longevity.
The Lee mold has exceeded my expectations. It has allowed me to produce hundreds of accurate and consistent bullets for my .38 Special, saving me a significant amount of money compared to buying commercially manufactured ammunition.
Breaking Down the Features of Lee Double Cavity Bullet Mold 358-150-1R 90328
Specifications
The Lee Double Cavity Bullet Mold 358-150-1R 90328 is specifically designed for casting .38 caliber bullets, fitting calibers such as .38 Colt NP, .38 Special, and .357 Magnum. It casts a 150-grain round nose (RN) bullet.
The mold features a double cavity design, allowing for the simultaneous casting of two bullets, improving efficiency. The cavity depth is approximately 2 inches. This specific mold is made from aluminum.
These specifications are crucial for reloaders because they define the type of bullet produced and its compatibility with specific firearms. The round nose design is known for its smooth feeding characteristics, making it suitable for various revolvers and lever-action rifles.
Performance & Functionality
The Lee Double Cavity Bullet Mold 358-150-1R 90328 performs admirably, consistently producing bullets within acceptable weight and diameter tolerances. With proper technique and alloy, the bullets drop easily from the mold.
The mold’s double cavity design significantly speeds up the casting process compared to single-cavity molds. However, aluminum molds can sometimes require more careful temperature management than iron molds.
The mold meets and slightly exceeds my expectations. The bullets it produces are accurate and reliable.
Design & Ergonomics
The Lee Double Cavity Bullet Mold 358-150-1R 90328 is constructed from aluminum, making it lightweight and easy to handle. The mold blocks are precisely machined to ensure consistent bullet dimensions.
The Lee mold is relatively user-friendly, especially for those with some bullet casting experience. There may be a slight learning curve for first-time casters to master the sprue plate operation and temperature control.
Durability & Maintenance
The Lee Double Cavity Bullet Mold 358-150-1R 90328, with proper care, should last for thousands of castings. Aluminum molds are more prone to damage from mishandling compared to iron molds, so careful handling is crucial.
The mold is easy to maintain. A simple cleaning with a wire brush and solvent after each use keeps it in good working order.
Accessories and Customization Options
The Lee Double Cavity Bullet Mold 358-150-1R 90328 does not come with any accessories other than the mold handles. To use the mold, you will need a lead melting pot, lead alloy, a sprue plate cutter, and a bullet sizing die if you want to resize the bullets.
The mold is compatible with most standard bullet sizing dies and bullet lubes. There are no direct customization options for the mold itself, but you can tailor the bullet’s hardness and weight by adjusting the lead alloy composition.
Pros and Cons of Lee Double Cavity Bullet Mold 358-150-1R 90328
Pros
- The Lee Double Cavity Bullet Mold is remarkably affordable compared to other molds on the market, making it accessible to budget-conscious reloaders.
- Its double cavity design allows for faster casting sessions compared to single-cavity molds.
- The mold consistently produces accurate and well-formed bullets when used with proper technique and alloy.
- It is relatively lightweight and easy to handle, reducing fatigue during extended casting sessions.
- The mold is compatible with readily available bullet sizing dies and lubes, allowing for further customization.
Cons
- Aluminum molds can be more sensitive to temperature fluctuations than iron molds, requiring more careful heat management.
- The mold requires a learning curve for first-time casters to master the sprue plate operation and achieve consistent results.
Who Should Buy Lee Double Cavity Bullet Mold 358-150-1R 90328?
The Lee Double Cavity Bullet Mold 358-150-1R 90328 is perfect for reloaders looking to cast their own .38 caliber bullets for target shooting, plinking, and general practice. It is particularly well-suited for those on a budget or those new to bullet casting who want an affordable and easy-to-use entry point.
This product is not for those who demand the absolute highest precision and consistency, or who prefer the robustness of iron molds. Individuals seeking specialized bullet designs or extremely high production rates may also want to explore other options.
Must-have accessories include a lead melting pot, lead alloy, a sprue plate cutter, and a bullet sizing die. It is also recommended to have a good bullet lube for optimal performance.
Conclusion on Lee Double Cavity Bullet Mold 358-150-1R 90328
The Lee Double Cavity Bullet Mold 358-150-1R 90328 is an excellent option for reloaders looking to get into bullet casting without breaking the bank. Its affordable price, double cavity design, and consistent performance make it a valuable tool for producing .38 caliber bullets.
The price is definitely justified for the performance and cost savings it offers. The ability to produce accurate and reliable bullets at a fraction of the cost of commercially manufactured ammunition makes it a worthwhile investment.
I would personally recommend the Lee Double Cavity Bullet Mold 358-150-1R 90328 to anyone looking to cast their own .38 caliber bullets. It is a reliable and affordable tool that will provide years of service with proper care. Take the plunge and start casting your own bullets – you won’t regret it!
