The Kleen-Bore MagBrush 223 Rem,5.56x45mm NATO,7.62x39mm AR-15/M16/AK47 Made a Bold First Impression
For years, I’ve witnessed firsthand how neglected magazines can cripple even the most meticulously maintained AR-15 or AK-47. Enter the Kleen-Bore MagBrush 223 Rem,5.56x45mm NATO,7.62x39mm AR-15/M16/AK47 from Kleen-Bore, a deceptively simple tool promising to address this often-overlooked aspect of firearm maintenance. The fact that it’s Made in the USA immediately piqued my interest, hinting at a commitment to quality.
My journey to finding the Kleen-Bore MagBrush stemmed from consistent issues with magazine feeding in my primary AR-15 during competitive shooting events. I was experiencing frustrating failures to feed, especially after shooting several hundred rounds. Cleaning the bolt carrier group and chamber meticulously helped, but the underlying problem persisted: grime and debris accumulation within the magazine well and magazines themselves. This promised solution needed to be better than compressed air and a rag.
The Kleen-Bore MagBrush arrived in a simple, no-frills package. Upon first inspection, I was struck by its sturdy construction and the thoughtful design of the brush head. It felt solid and well-made, a far cry from some of the flimsy, disposable cleaning tools I’ve encountered.
I considered other methods like using a bore snake or specialized magazine cleaning tools from other manufacturers. I chose the Kleen-Bore MagBrush because of its straightforward approach and the promise of specifically targeting the magazine well area, not just the magazine itself. Its compatibility with both AR and AK style magazines was also a major selling point for me.
Initially, I was cautiously optimistic. Could a brush really make that much of a difference? It seemed almost too simple. The real test would be on the range, after a day of heavy use.
Real-World Testing: Putting Kleen-Bore MagBrush 223 Rem,5.56x45mm NATO,7.62x39mm AR-15/M16/AK47 to the Test
First Use Experience
My initial testing ground for the Kleen-Bore MagBrush was at my local outdoor shooting range, following a high-volume training session. I had fired approximately 500 rounds of 5.56mm through my AR-15 and the telltale signs of carbon buildup and powder residue were evident. This would be the proving grounds.
The conditions were fairly typical: sunny, with a light breeze kicking up some dust. The AR-15 was noticeably sluggish in magazine changes, which was my cue. Using the Kleen-Bore MagBrush was surprisingly intuitive. After a few quick passes in the mag well, I could see the built-up grime being dislodged.
It didn’t take long to get used to it. The brush’s shape allowed it to reach into all the nooks and crannies of the magazine well. One surprise was the amount of gunk that came out after only a single range session.
Extended Use & Reliability
After several weeks and multiple range sessions (including one particularly dusty outing), the Kleen-Bore MagBrush has become an integral part of my cleaning routine. It cleans far better than a simple cloth. Magazine changes are now noticeably smoother and faster.
The brush shows no significant signs of wear and tear. The bristles remain stiff and effective. Cleaning the Kleen-Bore MagBrush itself is straightforward; I simply rinse it with warm water and a bit of solvent.
Compared to my previous cleaning methods (compressed air and hoping for the best), the Kleen-Bore MagBrush is a game-changer. It offers a more thorough and reliable cleaning solution, resulting in tangible improvements in firearm performance. The failures to feed have been drastically reduced, if not eliminated.
Breaking Down the Features of Kleen-Bore MagBrush 223 Rem,5.56x45mm NATO,7.62x39mm AR-15/M16/AK47
Specifications
- Caliber Compatibility: 223 Rem, 5.56x45mm NATO, 7.62x39mm. This versatile compatibility makes it suitable for a wide range of popular firearms.
- Platform Compatibility: AR-15/M16/AK47 style rifles. Designed specifically for cleaning magazine wells and magazines of these platforms.
- Material: Durable synthetic bristles and a robust handle. The durable construction ensures longevity and effective cleaning.
- Intended Use: Cleaning magazine wells and magazines to improve feeding reliability. Addresses a commonly overlooked maintenance area.
- Origin: Made in the USA. The Made in the USA designation often indicates a higher level of quality control.
These specifications are important because they directly impact the Kleen-Bore MagBrush‘s ability to effectively clean and maintain the critical feeding components of your firearm. The brush head is shaped to allow it to effectively get into the mag well of AR and AK platforms. The use of synthetic bristles means it can hold up to solvents and repeated use.
Performance & Functionality
The Kleen-Bore MagBrush excels at its primary function: removing debris from magazine wells and magazines. It is a huge performance boost. The brush effectively dislodges stubborn carbon buildup, dirt, and unburned powder, leading to smoother magazine changes and improved feeding reliability.
The main strength is its simplicity and effectiveness. The only thing that could be improved is perhaps adding a small scraper on the handle for particularly stubborn deposits. It has vastly exceeded my expectations.
Design & Ergonomics
The Kleen-Bore MagBrush features a simple yet effective design. The handle is comfortable to grip. The brush head is shaped to conform to the contours of most AR-15 and AK-47 magazine wells.
It is extremely user-friendly. There’s virtually no learning curve. Anyone who knows how to operate an AR or AK can easily use this tool.
Durability & Maintenance
Given its solid construction, the Kleen-Bore MagBrush appears to be built to last. Time will tell, but the brush bristles are holding up well.
Maintenance is minimal. A quick rinse with solvent after each use is sufficient to keep it in top condition.
Accessories and Customization Options
The Kleen-Bore MagBrush itself is a standalone tool and doesn’t require any additional accessories. It’s designed to be a simple, effective, and self-contained solution.
It doesn’t offer customization options in the traditional sense. However, the brush is compatible with a variety of cleaning solvents. It makes cleaning easier and more effective.
Pros and Cons of Kleen-Bore MagBrush 223 Rem,5.56x45mm NATO,7.62x39mm AR-15/M16/AK47
Pros
- Noticeably Improves Feeding Reliability: Eliminates failures to feed caused by dirty magazine wells.
- Easy to Use: No learning curve; anyone can use it effectively.
- Durable Construction: Made with quality materials that withstand repeated use.
- Versatile Compatibility: Works with both AR-15 and AK-47 platforms and related calibers.
- Affordable: Great value for the price; a small investment for improved performance.
Cons
- Bristles could potentially shed with excessive force.
- May require solvent for heavily soiled magazine wells.
Who Should Buy Kleen-Bore MagBrush 223 Rem,5.56x45mm NATO,7.62x39mm AR-15/M16/AK47?
The Kleen-Bore MagBrush is perfect for: Competitive shooters, tactical professionals, and anyone who relies on their AR-15 or AK-47 for serious use. It’s also great for those who simply want to maintain their firearms properly. This is a must have.
Who should skip this product? Someone who rarely shoots their firearm, or doesn’t mind dealing with occasional feeding issues. Anyone not shooting an AR or AK style rifle will also not benefit.
Must-have accessories or modifications? High-quality gun solvent. Otherwise, the brush works perfectly as is.
Conclusion on Kleen-Bore MagBrush 223 Rem,5.56x45mm NATO,7.62x39mm AR-15/M16/AK47
The Kleen-Bore MagBrush 223 Rem,5.56x45mm NATO,7.62x39mm AR-15/M16/AK47 is a deceptively simple but remarkably effective tool for maintaining the reliability of AR-15 and AK-47 style firearms. It addresses a commonly overlooked area of maintenance.
At $7.49, the price is absolutely justified. This isn’t just a cleaning tool; it’s an investment in the performance and reliability of your firearm.
I would wholeheartedly recommend the Kleen-Bore MagBrush. If you own an AR-15 or AK-47, do yourself a favor and add this to your cleaning kit. It’s a small price to pay for the peace of mind that comes with knowing your firearm will feed reliably when you need it most. Don’t wait until a failure to feed costs you a competition or puts you in danger. Get the Kleen-Bore MagBrush and keep your magazines running smoothly.