Kick eez Chek Eez Cheek Protector Black 5 X6 X1/16 Review

First Thoughts on the Kick eez Chek Eez Cheek Protector Black 5 X6 X1/16

As an experienced outdoor and tactical gear specialist, I’ve spent countless hours at the range and in the field. Recoil-induced cheek slap is a common nuisance, especially when working with heavier calibers or shotguns. That’s why I was intrigued by the Kick eez Chek Eez Cheek Protector Black 5 X6 X1/16, a seemingly simple solution promising enhanced shooting comfort and accuracy.

I’ve always sought ways to improve my shooting experience, from experimenting with different recoil pads to adjusting my stance. The promise of a microcellular urethane pad that simply adheres to the gun comb, eliminating recoil to the cheek, was certainly appealing. This felt like a quick, non-permanent solution that could be a game-changer.

Upon receiving the Kick eez Chek Eez Cheek Protector Black 5 X6 X1/16, my initial impression was that of a minimalist, no-frills product. The black pad felt dense yet pliable. Its dimensions (5″ x 6″ x 1/16″) seemed well-suited for a variety of firearms.

I considered options like building up the comb with moleskin or using a gel cheek rest. However, the Cheek Eez seemed like a cleaner and potentially more durable alternative. Its semi-permanent nature struck a good balance between being readily removable and not shifting around during use.

My first impression was cautiously optimistic. I was eager to test its ability to dampen recoil and improve my cheek weld. The simplicity of the design and the promise of enhanced comfort definitely piqued my interest.

Real-World Testing: Putting Kick eez Chek Eez Cheek Protector Black 5 X6 X1/16 to the Test

First Use Experience

I first tested the Kick eez Chek Eez Cheek Protector Black 5 X6 X1/16 at my local shooting range on a 12-gauge shotgun I often use for clay shooting. Conditions were dry and mild, typical for a late spring afternoon. Installation was straightforward: clean the gun comb, peel off the backing, and adhere the pad.

The immediate difference was noticeable. The Cheek Eez provided a softer, more cushioned contact point against my cheek. It absorbed a significant portion of the recoil impulse during the first round of shooting. This reduction in felt recoil made the experience noticeably more comfortable.

I did find that it took a few shots to adjust to the slightly altered cheek weld. After that, I found that it helped with consistency. There were no initial issues with adhesion or shifting of the pad.

Extended Use & Reliability

After several weeks of use, involving multiple trips to the range and a dove hunting trip, the Kick eez Chek Eez Cheek Protector Black 5 X6 X1/16 has held up remarkably well. There are no signs of significant wear and tear. It still feels dense and provides good cushioning.

Durability-wise, the adhesive is still holding strong despite exposure to moderate temperatures and some minor handling. I’ve cleaned the pad a few times using a damp cloth. It seems easy enough to maintain.

Compared to my previous experiences of shooting the same shotgun without any cheek protection, the Cheek Eez provides a substantial improvement in comfort and reduces fatigue during extended shooting sessions. It’s not a magical recoil eraser, but it noticeably softens the blow.

Breaking Down the Features of Kick eez Chek Eez Cheek Protector Black 5 X6 X1/16

Specifications

  • Material: Microcellular Urethane. This closed-cell foam provides excellent shock absorption and resists compression over time.
  • Dimensions: 5″ x 6″ x 1/16″. The size is versatile enough to be trimmed to fit a variety of stocks and firearms.
  • Color: Black. A neutral color that blends well with most firearm stocks.
  • Adhesive: Pressure-sensitive adhesive backing. This allows for easy installation and a semi-permanent bond.
  • Shape: Oval. This shape offers a good surface area for cheek contact while allowing for trimming and customization.

These specifications contribute to the Cheek Eez’s overall effectiveness. The microcellular urethane is critical for absorbing recoil. Its thin profile (1/16″) adds minimal bulk while still providing noticeable cushioning.

Performance & Functionality

The Kick eez Chek Eez Cheek Protector Black 5 X6 X1/16 performs its intended function admirably: reducing felt recoil against the cheek. It noticeably softens the impact and makes shooting more comfortable, especially with higher-recoiling firearms.

Its strength lies in its simplicity and ease of use. The adhesive backing makes installation quick and easy. Its main weakness is that it only provides a small amount of height adjustment.

The product definitely meets expectations. It’s a simple, affordable solution for mitigating cheek slap.

Design & Ergonomics

The build quality is good for what it is. The microcellular urethane feels dense and durable. Its light weight means it doesn’t significantly alter the balance of the firearm.

It’s exceptionally user-friendly. There is no learning curve. Just clean, peel, and stick.

Durability & Maintenance

The Kick eez Chek Eez Cheek Protector Black 5 X6 X1/16 should last for a reasonable amount of time under normal use. The semi-permanent adhesive is expected to hold for a few seasons.

Maintenance is minimal. Simply wipe clean with a damp cloth as needed.

Accessories and Customization Options

The Kick eez Chek Eez Cheek Protector Black 5 X6 X1/16 doesn’t come with any accessories. However, the pad can be easily trimmed with a sharp knife or scissors to customize its shape and fit.

It is universally compatible with most firearm stocks. It can be used alongside other accessories such as adjustable combs or recoil pads.

Pros and Cons of Kick eez Chek Eez Cheek Protector Black 5 X6 X1/16

Pros

  • Affordable and readily available. An inexpensive solution to improve shooting comfort.
  • Easy to install and remove. No gunsmithing required.
  • Noticeably reduces felt recoil on the cheek. Makes shooting more enjoyable.
  • Durable and long-lasting. Microcellular urethane is resilient and holds up well.
  • Customizable fit. Can be trimmed to fit a wide variety of firearms.

Cons

  • Provides minimal height adjustment. Won’t significantly alter the line of sight.
  • Adhesive is semi-permanent. Repeated removal and reapplication may weaken the bond.


Who Should Buy Kick eez Chek Eez Cheek Protector Black 5 X6 X1/16?

The Kick eez Chek Eez Cheek Protector Black 5 X6 X1/16 is perfect for:

  • Hunters who want to reduce recoil fatigue during long days in the field.
  • Clay and target shooters who need consistent cheek weld and recoil absorption for high-volume shooting.
  • Anyone who experiences discomfort or cheek slap when shooting higher-recoiling firearms.

Those who need significant height adjustment or a fully adjustable cheek rest should skip this product. Those with stocks that are unusually shaped might find fitting difficult, but trimming might solve any issue that may arise.

Must-have accessories or modifications? None are strictly required, but a sharp knife or scissors are useful for trimming and customizing the fit.

Conclusion on Kick eez Chek Eez Cheek Protector Black 5 X6 X1/16

The Kick eez Chek Eez Cheek Protector Black 5 X6 X1/16 is a simple, affordable, and effective solution for reducing felt recoil and improving shooting comfort. It’s not a revolutionary product, but it delivers on its promise.

The price is definitely justified for the level of comfort and recoil reduction it provides. It’s a small investment that can significantly enhance the shooting experience.

I would personally recommend the Kick eez Chek Eez Cheek Protector Black 5 X6 X1/16 to anyone seeking an easy and affordable way to mitigate cheek slap and improve their shooting comfort. If you’re tired of flinching, or simply want to improve the feel of your long-gun, give this product a try. Your cheek will thank you.


Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top