Let’s Dive into JP Enterprises JPoint 1 Degree Shim Piece
Red dot sights have revolutionized shooting, offering rapid target acquisition and improved accuracy. However, even the best optics can sometimes fall short due to elevation issues, especially when mounted on certain firearms or optic-ready slides. This is where the JP Enterprises JPoint 1 Degree Shim Piece steps in, providing a simple yet effective solution to correct these problems.
I was chasing that perfect zero on a new pistol build with an RMR cut slide. My JPoint, despite its best efforts, simply ran out of upward adjustment.
The JP Enterprises JPoint 1 Degree Shim Piece arrived in a small, unassuming package. Initially, I was a bit skeptical, thinking “it’s just a piece of plastic”. But upon closer inspection, the precision molding and clean lines gave me some confidence.
Compared to trying to shim the optic with cardboard or tape (which I admit I’ve done in a pinch), this felt like a professional, engineered solution. The biggest difference, and the reason I went with this over DIY methods, was the promise of a repeatable, secure, and level mounting surface. It addressed a specific problem with a purpose-built solution.
My first impression was relief; finally, a dedicated fix for this frustrating issue. Now, I just needed to see if it worked as advertised.
Real-World Testing: Putting JP Enterprises JPoint 1 Degree Shim Piece to the Test
First Use Experience
My initial testing took place at my local outdoor range, a familiar environment for evaluating firearm accessories. I mounted the shim between my JPoint and the slide, torquing the screws to the manufacturer’s recommended specifications. The goal was to see if the shim effectively addressed the elevation issue I was experiencing.
The weather was typical for early spring – slightly damp with a mild breeze. Despite the less-than-ideal conditions, the JP Enterprises JPoint 1 Degree Shim Piece did its job. After installation, I immediately gained back the needed elevation adjustment.
The installation was straightforward, although a touch fiddly, requiring careful alignment of the shim and optic. Beyond that, there were no other issues during first use.
Extended Use & Reliability
After several range sessions and approximately 500 rounds, the JP Enterprises JPoint 1 Degree Shim Piece has held up remarkably well. I check the optic mounting screws before each range trip, and I’ve seen no movement or loosening. The zero has remained consistent.
I’ve seen no signs of wear and tear on the plastic shim. Cleaning is simple; a quick wipe-down with a microfiber cloth is all that’s needed.
Previously, I’d struggled with inconsistent zeroing on this particular pistol. Now, the JP Enterprises JPoint 1 Degree Shim Piece delivers consistent performance, even with different ammunition types. It has definitely outperformed my previous, less elegant solutions.
Breaking Down the Features of JP Enterprises JPoint 1 Degree Shim Piece
Specifications
- The JP Enterprises JPoint 1 Degree Shim Piece is specifically designed to correct elevation issues when mounting JPoint red dot sights. It offers a consistent, precise 1-degree angle adjustment.
- It is constructed from a durable plastic material, chosen for its dimensional stability and resistance to compression. This ensures that it maintains its shape and angle under the stress of recoil.
- The shim features a female footprint on the bottom and a male footprint on top, perfectly matching the JPoint and optic-ready slides. This ensures a secure and stable fit.
- The Manufacturer is JP Enterprises. JP Enterprises is known for its high-quality firearm components and accessories.
- The shim is black in color, blending seamlessly with most JPoint sights and pistol slides. While aesthetically minor, this helps maintain a professional and streamlined appearance.
These specifications are crucial for achieving a reliable and accurate zero with your JPoint. The 1-degree angle is carefully calibrated to provide sufficient elevation adjustment without compromising the stability of the optic mount.
Performance & Functionality
The JP Enterprises JPoint 1 Degree Shim Piece performs its intended function flawlessly. It effectively corrects elevation issues, allowing for precise zeroing of the JPoint red dot sight.
Its strength lies in its simplicity and precision. The only potential weakness is the plastic construction, which some may perceive as less durable than metal, although in practice, it has proven to be sufficiently robust.
The shim meets and exceeds expectations. It transformed a frustrating and inaccurate setup into a reliable and accurate one.
Design & Ergonomics
The shim’s design is minimalist and functional. The plastic material is lightweight and doesn’t add noticeable bulk to the optic mount.
Installation is relatively user-friendly, though requires careful alignment. There is a slight learning curve.
Durability & Maintenance
The shim appears to be very durable. The plastic construction is resistant to wear and tear.
Maintenance is extremely simple; no special cleaning or lubrication is required. A quick wipe-down is all that’s necessary.
Accessories and Customization Options
The JP Enterprises JPoint 1 Degree Shim Piece is a standalone accessory. It enhances the performance of existing JPoint mounting solutions.
It is designed specifically for use with JPoint red dot sights and slides with the JPoint footprint. Compatibility with other brands or optics is not guaranteed.
Pros and Cons of JP Enterprises JPoint 1 Degree Shim Piece
Pros
- Effectively corrects elevation issues, allowing for precise zeroing of JPoint red dots.
- Simple and easy to install, requiring minimal technical expertise.
- Durable plastic construction, ensuring long-lasting performance.
- Precise 1-degree angle provides sufficient adjustment without compromising stability.
- Affordable solution compared to replacing the optic or slide.
Cons
- Plastic construction might not appeal to those seeking maximum durability.
- Designed specifically for JPoint sights, limiting compatibility with other optics.
Who Should Buy JP Enterprises JPoint 1 Degree Shim Piece?
Perfect for: Shooters who own a JPoint red dot sight and are experiencing elevation adjustment issues. Those building custom pistols or rifles with JPoint-compatible slides who anticipate needing additional elevation.
Who should skip this product? Anyone not using a JPoint red dot sight, or those who have sufficient elevation adjustment range with their current setup.
Must-have accessories or modifications? A quality set of optic mounting screws and a torque wrench to ensure proper installation and prevent damage.
Conclusion on JP Enterprises JPoint 1 Degree Shim Piece
The JP Enterprises JPoint 1 Degree Shim Piece is a simple yet remarkably effective solution for correcting elevation issues with JPoint red dot sights. It solves a specific problem with precision and ease of use.
At $4.99, the price is definitely justified. It is a far more affordable and convenient solution than replacing the optic or slide.
I would absolutely recommend the JP Enterprises JPoint 1 Degree Shim Piece to anyone struggling with JPoint elevation adjustments. It’s a small investment that can make a huge difference in accuracy and overall shooting experience. Don’t let elevation issues hold you back – grab a JP Enterprises JPoint 1 Degree Shim Piece and get your JPoint zeroed in today!