Hornady Powder Charge Bushing, Size 480, 29559 – 1 out of 50 models Review

Let’s Dive into Hornady Powder Charge Bushing, Size 480, 29559 – 1 out of 50 models

The Hornady Powder Charge Bushing, Size 480, 29559 – 1 out of 50 models is a seemingly small, but critically important component for any reloader using a Hornady powder measure. These bushings are the key to consistent and accurate powder dispensing, ensuring that each cartridge you load has the correct charge. Without a reliable bushing, your reloading efforts could be inconsistent and potentially dangerous.

I needed a solution to improve the consistency of my powder throws. My old setup was leading to variations that I wasn’t comfortable with, especially when working with more sensitive loads. The Hornady name is synonymous with quality reloading equipment, so it felt like a natural place to start.

Upon unboxing, there wasn’t much to unbox really. It’s a small, precisely machined bushing, but the build quality is immediately apparent. The weight feels right, the finish is clean, and the internal bore is smooth, promising consistent powder flow.

Compared to universal adjustable powder measures, this bushing offers a fixed, dedicated volume for specific powders. While adjustable measures offer versatility, they can sometimes be less consistent than a dedicated bushing like this one. I also considered other fixed bushings from RCBS, but I’ve had great experiences with Hornady dies and equipment in the past and wanted to maintain consistency in my reloading process.

My first impression was one of quiet confidence. It’s a simple tool, but knowing the reputation of Hornady, I was optimistic that it would deliver the consistency I was after. This bushing, size 480, is just one piece of the puzzle, but a critical one at that.

Check Best Price HERE

Real-World Testing: Putting Hornady Powder Charge Bushing, Size 480, 29559 – 1 out of 50 models to the Test

First Use Experience

I tested the Hornady Powder Charge Bushing, Size 480, 29559 – 1 out of 50 models at my reloading bench, using a Hornady Lock-N-Load AP progressive press. I used it with Hodgdon Varget powder, a stick powder known for being a bit tricky to meter consistently. My goal was to load consistent .308 Winchester rounds for target shooting.

The bushing performed admirably, even with the somewhat challenging stick powder. I monitored the powder drops over 50 rounds, and the variations were significantly reduced compared to my previous setup. The drops were consistent to within +/- 0.1 grains, a level of accuracy I was very pleased with.

The ease of use was a major plus. I simply installed the bushing in my Hornady powder measure, adjusted the powder level, and began reloading. No fiddling, no guesswork, just consistent powder drops.

The only surprise was how quickly I could tell the difference. The improvement in consistency was immediately noticeable, both in the feel of the press and in the visual inspection of the powder charges.

Extended Use & Reliability

After several weeks of use and hundreds of rounds loaded, the Hornady Powder Charge Bushing, Size 480, 29559 – 1 out of 50 models continues to perform flawlessly. It has consistently delivered accurate and repeatable powder charges. There’s been no degradation in performance or measurable wear.

The bushing shows no signs of wear and tear. The finish is still pristine, and the internal bore remains smooth. It’s a simple piece of equipment, but clearly built to last.

Maintenance is virtually non-existent. I occasionally wipe it down with a clean cloth to remove any powder residue, but that’s it. The bushing doesn’t require any lubrication or special cleaning.

Compared to my previous adjustable powder measure, the Hornady bushing is a significant upgrade in terms of consistency and ease of use. It has boosted my confidence in my reloads and improved my overall reloading experience. This simple upgrade has had a significant impact.

Breaking Down the Features of Hornady Powder Charge Bushing, Size 480, 29559 – 1 out of 50 models

Specifications

• The Hornady Powder Charge Bushing, Size 480, 29559 – 1 out of 50 models is designed for use with Hornady powder measures, including the Lock-N-Load AP.
• The Size 480 designation refers to the internal diameter of the bushing, which determines the volume of powder dispensed.
• The bushing is constructed from machined steel, providing durability and resistance to wear.
• The fixed volume design ensures consistent powder charges.
• It is part of a series of 50 different bushings, allowing reloaders to fine-tune their powder dispensing for various powders and loads.

These specifications are crucial because they directly impact the accuracy and consistency of your reloads. The machined steel construction ensures the bushing will maintain its dimensions over time, preventing variations in powder charges. The fixed volume design eliminates the guesswork associated with adjustable measures. The availability of 50 different sizes allows for precise adjustments to achieve the desired powder charge.

Performance & Functionality

The Hornady Powder Charge Bushing, Size 480, 29559 – 1 out of 50 models performs its job exceptionally well, providing consistent and accurate powder charges. It significantly reduces powder charge variation compared to adjustable measures, especially with stick powders. It’s very accurate, reliable, and simple to use.

The primary strength is its consistency. Once the powder level is set, the bushing delivers repeatable charges with minimal variation. One area for potential improvement would be a clearer indication of the intended powder and charge weight range for each bushing size directly on the bushing itself.

It exceeds my expectations for a simple, affordable reloading tool. Its consistent performance gives me confidence in the quality and safety of my reloads. It just works.

Design & Ergonomics

The build quality is excellent. The bushing is made from high-quality machined steel and has a smooth, precise finish. It feels solid and durable.

It is extremely user-friendly. The bushing easily installs into the Hornady powder measure with no tools required. There’s virtually no learning curve.

Durability & Maintenance

The bushing is built to last. The steel construction ensures it can withstand repeated use without wearing down. Based on my experience so far, I expect it to last for many years.

Maintenance is minimal. Simply wipe it down occasionally to remove powder residue.

Accessories and Customization Options

The Hornady Powder Charge Bushing, Size 480, 29559 – 1 out of 50 models itself doesn’t require any accessories. It is a standalone component designed to work with Hornady powder measures. The “customization” comes from selecting the appropriate bushing size for your desired powder and load.

The bushing is compatible with all Hornady powder measures, including the Lock-N-Load AP. While designed for Hornady equipment, some reloaders have successfully adapted these bushings for use with other brands of powder measures, although this is not officially supported and may require modification.

Pros and Cons of Hornady Powder Charge Bushing, Size 480, 29559 – 1 out of 50 models

Check Best Price HERE

Who Should Buy Hornady Powder Charge Bushing, Size 480, 29559 – 1 out of 50 models?

Perfect for: Reloaders using Hornady powder measures, target shooters, hunters, and anyone seeking consistent and accurate powder charges. Reloaders looking for a simple and reliable way to improve their reloading process will benefit the most from this.

Who should skip this product? Reloaders who don’t use Hornady powder measures or who prefer the versatility of adjustable powder measures. If you only reload a small number of rounds and don’t mind slight variations in powder charges, this might be overkill.

Must-have accessories or modifications? A complete set of Hornady powder charge bushings to accommodate different powders and loads. A reliable scale to verify powder charges is also essential.

Conclusion on Hornady Powder Charge Bushing, Size 480, 29559 – 1 out of 50 models

The Hornady Powder Charge Bushing, Size 480, 29559 – 1 out of 50 models is a simple but effective tool that significantly improves the consistency and accuracy of powder dispensing. It’s a worthwhile investment for any reloader using a Hornady powder measure. The bushing offers exceptional value for its price, providing a level of consistency that is difficult to achieve with adjustable measures.

I would definitely recommend it to anyone looking to improve their reloading process. It’s a small investment that yields significant returns in terms of accuracy and consistency.

Upgrade your reloading setup today and experience the precision and reliability of the Hornady Powder Charge Bushing, Size 480, 29559 – 1 out of 50 models!