Let’s Dive into Hornady Match Grade Bushing .307, NSN N, 594307 – 1 out of 62 models
The Hornady Match Grade Bushing .307, NSN N, 594307 – 1 out of 62 models is a small but critical component for precision reloaders seeking ultimate accuracy. It’s designed to be used with Hornady’s Match Grade New Dimension Dies, allowing for precise neck sizing. This bushing is one of a series, each differing in diameter by .002″, giving reloaders granular control over neck tension.
I’ve spent years chasing the perfect load for my precision rifles, and neck tension is always a key factor. Inconsistent neck tension leads to inconsistent bullet release, which translates directly to larger groups downrange. I was looking for a way to refine my reloading process and eliminate one potential source of variability, and that led me to exploring neck sizing bushings.
My first impression was that this is a deceptively simple piece of equipment. The steel construction feels solid and precise. It’s a small donut of hardened steel, but its importance in the reloading process is huge.
I considered using a standard resizing die but found that it overworks the brass and leads to premature case failure. Other bushing systems exist, but I was drawn to Hornady because of their reputation for quality and the readily available range of bushing sizes. I ultimately chose this bushing because it allows for very fine adjustments and because I already owned a Hornady reloading press.
My initial feeling was excitement mixed with a bit of apprehension. This was another step down the rabbit hole of precision reloading, but I was hopeful it would pay off in tighter groups. I was excited to finally fine-tune my loads to the maximum capability.
Real-World Testing: Putting Hornady Match Grade Bushing .307, NSN N, 594307 – 1 out of 62 models to the Test
First Use Experience
I tested the Hornady Match Grade Bushing .307, NSN N, 594307 – 1 out of 62 models at my home reloading bench and at the local gun range. I was working on developing a load for my .308 Winchester bolt-action rifle, focusing on 175-grain Sierra MatchKing bullets. The range provided consistent lighting conditions, allowing me to precisely record and measure performance.
The bushing performed flawlessly in dry conditions and in the humidity of my garage. It was remarkably simple to install and use. No learning curve here; just drop it into the die body and get to work.
The ease of use was immediately apparent. After installing the bushing in the Hornady Match Grade New Dimension die, I began resizing fired brass. The process was smooth and consistent, noticeably reducing the force required compared to full-length resizing.
No issues arose during the first use. The cases resized smoothly and consistently, providing the desired neck tension without excessive force or deformation. It felt great to have full control over the resizing process.
Extended Use & Reliability
After several months of use, the Hornady Match Grade Bushing .307, NSN N, 594307 – 1 out of 62 models has held up incredibly well. There are no visible signs of wear or tear. The hardened steel shows no signs of deformation.
The bushing has proven exceptionally durable. Even after resizing hundreds of cases, the internal diameter remains consistent. This speaks volumes about the quality of the materials and manufacturing process.
Maintenance is simple. I wipe the bushing clean with a dry cloth after each reloading session. I occasionally apply a light coat of gun oil to prevent rust, although I haven’t seen any signs of corrosion so far.
Compared to my previous experiences with standard resizing dies, the Hornady bushing system is a significant improvement. Case life has been extended because I’m no longer overworking the brass. I am getting smaller groups on the target because of the consistent neck tension.
Breaking Down the Features of Hornady Match Grade Bushing .307, NSN N, 594307 – 1 out of 62 models
Specifications
The Hornady Match Grade Bushing .307, NSN N, 594307 – 1 out of 62 models is specifically designed for neck sizing .30 caliber cartridges. Its inner diameter is .307 inches. The bushing is constructed of hardened steel for exceptional durability.
The .307″ diameter is a critical specification because it determines the amount of neck tension on the bullet. The hardened steel construction ensures the bushing maintains its dimensions over time. This is critical for consistency.
Performance & Functionality
The Hornady Match Grade Bushing .307, NSN N, 594307 – 1 out of 62 models performs its job exceptionally well. It provides consistent neck tension, which is vital for accuracy. It is a simple and effective tool.
The primary strength of this bushing is its precision. It resizes the case neck to a consistent diameter every time. The main weakness is that you need to measure your fired brass to select the correct bushing size.
This bushing far exceeds my expectations. My groups have shrunk significantly, and my SD (Standard Deviation) numbers are consistently lower. The results speak for themselves.
Design & Ergonomics
The build quality is excellent. The hardened steel is precisely machined. Its weight is negligible.
The bushing is incredibly user-friendly. There is virtually no learning curve. It installs easily into the Hornady Match Grade New Dimension die.
Durability & Maintenance
The Hornady Match Grade Bushing .307, NSN N, 594307 – 1 out of 62 models should last for many years with proper care. The hardened steel is incredibly durable. Its longevity is ensured.
Maintenance is straightforward. Clean with a dry cloth and lightly oil when storing. No special tools or skills are required.
Accessories and Customization Options
The Hornady Match Grade Bushing .307, NSN N, 594307 – 1 out of 62 models itself doesn’t have accessories, but it requires the Hornady Match Grade New Dimension Dies. You can also use different sized bushings within the same die body. These accessories are compatible to use along side the bushing.
The bushing system is designed to work seamlessly with other Hornady reloading equipment. It’s compatible with most standard reloading presses that accept 7/8″-14 threaded dies. This is a bonus.
Pros and Cons of Hornady Match Grade Bushing .307, NSN N, 594307 – 1 out of 62 models
Pros
- Increased Accuracy: Provides consistent neck tension for tighter groups. This is where it shines.
- Extended Case Life: Prevents overworking of brass. More reloads per case is a real benefit.
- Easy to Use: Simple installation and operation. It is ready to go out of the package.
- Durable Construction: Hardened steel ensures long-lasting performance. Quality construction is a must have for reloaders.
- Fine-Tuned Neck Tension: Allows precise control over neck tension. The precision is exceptional.
Cons
- Requires Measurement: Need to measure fired brass to determine the correct bushing size. Without measuring you will not get the most out of the bushing.
- Additional Investment: Requires Hornady Match Grade New Dimension Dies. Some reloaders may not be prepared to invest.
Who Should Buy Hornady Match Grade Bushing .307, NSN N, 594307 – 1 out of 62 models?
The Hornady Match Grade Bushing .307, NSN N, 594307 – 1 out of 62 models is perfect for precision rifle shooters, competitive shooters, and reloaders seeking ultimate accuracy. Target shooters will gain the most from using this product. It is also great for hunters who demand consistent performance from their ammunition.
This bushing is not ideal for high-volume reloaders who prioritize speed over precision. It is also overkill for casual shooters who aren’t concerned with achieving the tightest possible groups. Also, individuals not willing to measure their brass should skip this product.
A concentricity gauge is a must-have accessory to ensure your loaded rounds are straight. You will also need a micrometer to measure your case necks after firing. Without both of these tools the bushing is limited.
Conclusion on Hornady Match Grade Bushing .307, NSN N, 594307 – 1 out of 62 models
The Hornady Match Grade Bushing .307, NSN N, 594307 – 1 out of 62 models is a valuable addition to any precision reloader’s toolkit. It offers a level of control and consistency that standard resizing dies simply cannot match. It is a great product for serious reloaders.
The price is justified by the increased accuracy and extended case life you’ll experience. I personally recommend it to anyone serious about precision reloading. If you want to take your reloading to the next level, invest in the Hornady bushing system and start shrinking those groups!
Don’t settle for mediocre ammunition. Invest in the Hornady Match Grade Bushing .307, NSN N, 594307 – 1 out of 62 models and experience the difference that precision makes!