Hornady Match Grade Bushing .259, NSN N, 594259 – 1 out of 62 models Review

Let’s Dive into Hornady Match Grade Bushing .259, NSN N, 594259 – 1 out of 62 models

For those of us chasing that elusive tenth-of-an-inch group, the journey often leads down the rabbit hole of reloading. And within that realm, neck sizing becomes a crucial step. Hornady’s Match Grade Bushing .259, NSN N, 594259 – 1 out of 62 models promises to be a key component in achieving consistent neck tension and, ultimately, superior accuracy.

I’ve spent countless hours tweaking loads, chasing the perfect recipe. I’ve always been on the lookout for ways to improve consistency in my ammunition. This bushing caught my eye as a potential upgrade to my reloading process, specifically for my precision .260 Remington rifle.

The Hornady bushing arrived in simple, functional packaging. The bushing itself felt solid and well-machined. My initial impression was that this little piece of steel could make a tangible difference.

I had been using a universal neck sizing die with a standard expander ball. Compared to that setup, the Hornady bushing system seemed more refined. I was hoping for a more consistent and less stressful resizing process. Initial impressions were good, bordering on hopeful.

Check Best Price HERE

Real-World Testing: Putting Hornady Match Grade Bushing .259, NSN N, 594259 – 1 out of 62 models to the Test

First Use Experience

My first use of the Hornady Match Grade Bushing .259, NSN N, 594259 – 1 out of 62 models took place at my home reloading bench. I prepared a batch of previously fired .260 Remington brass. The goal was to assess the bushing’s ability to consistently resize the case necks.

The resizing process was noticeably smoother than with my previous die. The bushing, when properly lubricated, glided through the brass with minimal effort. I didn’t encounter any sticking or excessive force required during the neck sizing operation.

I did find that achieving the correct amount of lubrication was key. Too little, and the bushing would drag, too much, and it would create hydraulic resistance. It took a few cases to find the sweet spot but once dialed in it was smooth sailing.

Extended Use & Reliability

After several reloading sessions spanning a few months, the Hornady Match Grade Bushing .259, NSN N, 594259 – 1 out of 62 models has held up remarkably well. There are no visible signs of wear or deformation on the bushing’s surface. The bushing continues to provide consistent neck tension on my brass.

Durability-wise, the bushing seems built to last. The hardened steel construction appears resistant to the abrasive nature of brass. Regular cleaning with a dry cloth is all that’s needed to keep it functioning optimally.

Compared to my previous universal die, the Hornady bushing system has significantly improved my reloading process. I am getting more consistent neck tension, which translates to tighter groups on the range. This bushing has proven to be a valuable investment.

Breaking Down the Features of Hornady Match Grade Bushing .259, NSN N, 594259 – 1 out of 62 models

Specifications

The Hornady Match Grade Bushing .259, NSN N, 594259 – 1 out of 62 models is a precision-machined, hardened steel bushing designed for use with Hornady Match Grade New Dimension Dies. Its critical specification is its inner diameter of .259 inches. This size is crucial for achieving the desired neck tension on .264 caliber bullets in cartridges like .260 Remington, 6.5 Creedmoor and 6.5×47 Lapua.

The bushing’s purpose is to resize the case neck to a specific diameter. This diameter is slightly smaller than the bullet diameter. This creates tension which holds the bullet firmly in place. Consistent neck tension is vital for uniform bullet release. This promotes consistent pressures and improved accuracy.

Performance & Functionality

The Hornady Match Grade Bushing .259, NSN N, 594259 – 1 out of 62 models performs its job admirably. It consistently resizes case necks to the specified diameter, ensuring proper bullet seating. This consistent bullet seating depth has translated to more predictable velocities and tighter groups on target.

The bushing’s primary strength is its ability to provide consistent neck tension. The only weakness is the initial learning curve of lubrication, but this is minor. It definitely meets and exceeds expectations for precision reloading.

Design & Ergonomics

The Hornady Match Grade Bushing .259, NSN N, 594259 – 1 out of 62 models is made from hardened steel. This gives it a robust and durable feel. Its small size makes it easy to handle and install into the Hornady neck sizing die.

The bushing is inherently user-friendly. Once you understand the concept of neck sizing, the bushing simply inserts into the die. There is virtually no learning curve.

Durability & Maintenance

Given its hardened steel construction, the Hornady Match Grade Bushing .259, NSN N, 594259 – 1 out of 62 models should last for many years, even with frequent use. The simple design minimizes the risk of mechanical failure.

Maintenance is straightforward. Simply wiping the bushing clean after each reloading session is all that’s really needed. A light coat of oil can prevent rust during long-term storage.

Accessories and Customization Options

The Hornady Match Grade Bushing .259, NSN N, 594259 – 1 out of 62 models doesn’t come with any accessories by itself. It requires the Hornady Match Grade New Dimension Neck Sizing Die. The real customization comes from using different bushing sizes to achieve different levels of neck tension.

The Hornady system is proprietary. The bushings are specifically designed for Hornady dies. While some users may find workarounds with other brands, it’s best to stick to the Hornady ecosystem for optimal performance.

Pros and Cons of Hornady Match Grade Bushing .259, NSN N, 594259 – 1 out of 62 models