Let’s Dive into Hogue Large OverMolded Butt Pad for Bolt Action Rifle and Shotgun Stocks 00700
The Hogue Large OverMolded Butt Pad for Bolt Action Rifle and Shotgun Stocks 00700 is designed to provide enhanced recoil absorption and a more comfortable shooting experience. This seemingly simple accessory can drastically improve the feel and control of your firearm. Hogue is a trusted name in the industry, known for their quality grips and firearm accessories. This butt pad aims to extend that reputation to the realm of recoil management.
I’ve spent countless hours behind rifles and shotguns, and recoil fatigue is a real issue, especially during extended range sessions or hunting trips. I needed a solution that could reduce felt recoil without significantly altering the rifle’s balance or length of pull. I was also searching for something durable, slip-resistant, and easy to install.
Upon receiving the Hogue Large OverMolded Butt Pad, I was immediately impressed by the feel of the rubber. It was firm yet pliable, promising good recoil absorption. The pad felt solid and well-made, indicating good build quality. It had a slightly tacky surface, which suggested excellent grip.
I considered a few other options, including Limbsaver and Pachmayr butt pads. I chose the Hogue pad because of Hogue’s reputation for quality overmolding and the pad’s specifically designed dimensions to fit a wide variety of stocks. The price point also played a factor; it offered a good balance of performance and affordability.
My first impression was positive. The Hogue butt pad seemed like a well-designed and well-executed solution to a common problem. I was eager to test it out on my Remington 700 and see if it lived up to my expectations.
Real-World Testing: Putting Hogue Large OverMolded Butt Pad for Bolt Action Rifle and Shotgun Stocks 00700 to the Test
First Use Experience
My initial testing took place at my local shooting range. I mounted the Hogue Large OverMolded Butt Pad on my Remington 700 chambered in .308 Winchester. I intended to evaluate its recoil reduction capabilities and impact on shooting comfort. I also brought along my 12-gauge shotgun to see how the pad performed with heavier recoil.
The pad performed admirably in dry conditions at the range. Recoil was noticeably reduced, allowing for quicker follow-up shots. I tested the pad in a light rain shower the following week during a squirrel hunt; even when wet, the pad maintained a solid grip against my shoulder.
Installation was fairly straightforward, though it did require a bit of fitting. Once installed, it felt very secure. After the first few shots, I realized that the added length of pull slightly altered my shooting stance; however, this was easily adjusted.
The only minor issue after the first use was a slight “rubbing” sensation against my shooting jacket, which I expected to resolve itself as the pad wore in.
Extended Use & Reliability
After several months of use, the Hogue Large OverMolded Butt Pad has proven to be a reliable addition to my rifles and shotgun. It has endured multiple range sessions, hunting trips, and even a few unintentional bumps and scrapes. The pad has helped reduce recoil on my .308 and has made shooting my 12-gauge significantly more manageable.
The pad shows minimal signs of wear and tear, despite regular use. There are a few minor scuff marks, but the rubber itself remains intact and pliable. The overmolded construction appears to be highly durable.
Maintenance is simple: I wipe it down with a damp cloth after each use. I occasionally use a rubber protectant to keep it supple. The pad has held up well against the elements, showing no signs of cracking or deterioration.
Compared to previous experiences with hard plastic butt plates, the Hogue pad is a significant improvement. It provides far superior recoil absorption and a more comfortable shooting experience. It has allowed me to extend my range sessions without experiencing excessive shoulder fatigue.
Breaking Down the Features of Hogue Large OverMolded Butt Pad for Bolt Action Rifle and Shotgun Stocks 00700
Specifications
The Hogue Large OverMolded Butt Pad for Bolt Action Rifle and Shotgun Stocks 00700 is designed for universal fit on Hogue bolt-action rifle and shotgun stocks. It’s made from Hogue’s durable and comfortable OverMolded rubber. This pad offers increased recoil absorption and a non-slip surface.
The “Universal” fit means it’s intended for Hogue stocks, simplifying installation. The OverMolded rubber is the key to its recoil-reducing and slip-resistant properties. This is critical for managing recoil effectively and maintaining a solid cheek weld.
Performance & Functionality
The Hogue Large OverMolded Butt Pad excels at its primary function: reducing felt recoil. It effectively cushions the shoulder, making shooting sessions more comfortable and less fatiguing. It provides a stable, non-slip surface, preventing the rifle or shotgun from shifting during recoil.
The pad’s strength lies in its simplicity and effectiveness. There are no complicated features or adjustments, making it easy to use and maintain. One potential weakness is that its universal fit may require some minor fitting for certain stocks. However, this is a minor inconvenience compared to the benefits it provides.
The Hogue butt pad meets and exceeds expectations. It provides a noticeable improvement in shooting comfort and control. It is a worthwhile upgrade for anyone looking to reduce recoil and enhance their shooting experience.
Design & Ergonomics
The Hogue butt pad’s design is simple and functional. The overmolded rubber provides a comfortable and secure grip. Its weight is negligible, so it won’t significantly affect the rifle’s balance.
The design is user-friendly, with no learning curve. Installation is straightforward, requiring only basic tools and some patience. The rounded edges prevent snagging and provide a comfortable feel against the shoulder.
Durability & Maintenance
The Hogue Large OverMolded Butt Pad is built to last. The overmolded rubber is highly resistant to wear and tear. It can withstand exposure to the elements without cracking or deteriorating.
Maintenance is minimal, requiring only occasional cleaning with a damp cloth. The pad is easy to inspect for damage. Any minor repairs can typically be done with readily available adhesives.
Accessories and Customization Options
The Hogue Large OverMolded Butt Pad doesn’t come with any specific accessories, as it is an accessory itself. Its compatibility with other accessories largely depends on the rifle or shotgun stock it’s mounted on. It is compatible with slings, cheek rests, and other stock-mounted accessories.
While the pad itself isn’t customizable, its installation can impact the suitability of other accessories. For example, the added length of pull may require adjustments to the scope mounting or cheek weld.
Pros and Cons of Hogue Large OverMolded Butt Pad for Bolt Action Rifle and Shotgun Stocks 00700
Pros
- Significantly reduces felt recoil for a more comfortable shooting experience.
- Provides a secure, non-slip surface, enhancing control and stability.
- Durable overmolded rubber construction ensures long-lasting performance.
- Simple and easy to install, requiring only basic tools.
- Affordable price point makes it a cost-effective upgrade.
Cons
- “Universal” fit may require minor fitting for some stocks.
- The added length of pull may require adjustments to shooting stance or optics.
Who Should Buy Hogue Large OverMolded Butt Pad for Bolt Action Rifle and Shotgun Stocks 00700?
The Hogue Large OverMolded Butt Pad is perfect for hunters who need to endure multiple shots in the field without fatigue. It is also ideal for competitive shooters who want to minimize recoil and improve their follow-up shot times. It’s a must-have for anyone sensitive to recoil or looking to enhance the comfort and control of their rifle or shotgun.
Those who are perfectly comfortable with their existing recoil setup or prioritize ultra-lightweight setups might want to skip this product. This is due to the minimal amount of weight added. Also, those with stocks that do not readily accept aftermarket butt pads may encounter difficulties installing it.
A must-have accessory to consider with the Hogue pad is a stock fitting kit. This will allow for fine-tuning the fit to your specific rifle or shotgun stock. Also, a quality set of gunsmithing screwdrivers will help prevent damage during installation.
Conclusion on Hogue Large OverMolded Butt Pad for Bolt Action Rifle and Shotgun Stocks 00700
The Hogue Large OverMolded Butt Pad for Bolt Action Rifle and Shotgun Stocks 00700 is a worthwhile investment for anyone seeking to reduce recoil and improve their shooting comfort. Its durable construction, non-slip surface, and simple installation make it a practical and effective upgrade. The name Hogue brings trust.
At $29.99, the price is certainly justified. It delivers noticeable improvements in shooting performance and comfort. It will pay for itself in enhanced shooting enjoyment and reduced fatigue.
I would personally recommend the Hogue butt pad to anyone looking to upgrade their rifle or shotgun stock. It’s a simple, affordable, and effective solution to a common problem. Enhance your shooting experience today with the Hogue Large OverMolded Butt Pad!