First Thoughts on the Hogue Grips OM Rubber Remington 870 Stock/Forend
The Hogue Grips OM Rubber Remington 870 Stock/Forend promises to be a significant upgrade to the ubiquitous Remington 870 shotgun, known for its reliability but sometimes lacking in comfort and ergonomics. Hogue is a well-respected name in the firearms accessory world, known for their comfortable, grippy rubber overmoldings. The promise of enhanced handling and recoil reduction is immediately appealing, especially for a shotgun that can pack a punch.
I’ve been shooting and working with firearms for over a decade, and the Remington 870 has always been a staple in my collection for its versatility. However, the factory stock and forend are, to be blunt, basic and leave much to be desired, particularly in wet or cold conditions. I was looking for a more secure and comfortable grip, along with some recoil mitigation, to improve my shooting experience during extended range sessions and potential hunting scenarios.
Upon receiving the Hogue Grips OM Rubber Remington 870 Stock/Forend, the initial impression was somewhat mixed. The rubber overmolding felt good in hand, offering a reassuringly tacky texture. The weight seemed slightly lighter than the factory furniture, which could be a benefit for maneuverability. However, the overall aesthetic appeared somewhat plain, and the fit and finish didn’t immediately scream “premium” – something I’ve come to expect from Hogue.
Compared to options like the Magpul SGA stock or even some aftermarket wooden furniture, the Hogue set appears more utilitarian. I chose it primarily for its reputed comfort and recoil reduction properties, prioritizing function over pure aesthetics. My hope was that the rubber overmolding would provide a superior grip and dampen recoil effectively, even if it lacked the visual appeal of some other offerings.
My first impression was cautiously optimistic; while not visually stunning, the Hogue Grips OM Rubber Remington 870 Stock/Forend seemed like a practical and potentially effective upgrade. The proof, however, would be in the real-world testing.
Real-World Testing: Putting Hogue Grips OM Rubber Remington 870 Stock/Forend to the Test
First Use Experience
The initial testing ground for the Hogue Grips OM Rubber Remington 870 Stock/Forend was my local shooting range. I ran a few boxes of various shotgun shells through the 870, from light target loads to heavier buckshot and slugs. The range provided a controlled environment to assess grip, recoil management, and overall comfort.
The Hogue forend immediately felt better than the factory plastic. The rubber provided a secure grip, even with slightly sweaty hands. The stock also felt comfortable against my shoulder, and the recoil pad did seem to absorb some of the kick. However, the difference wasn’t as dramatic as I had hoped, especially with heavier loads. I did notice that shouldering the shotgun was smoother thanks to the softer rubber finish.
There were no significant issues during the first range session, although the forend did exhibit a slight “squishiness” that I wasn’t entirely comfortable with. This flex made follow-up shots slightly less precise than with a more rigid forend.
Extended Use & Reliability
After several weeks of consistent use, primarily at the range and on a couple of upland bird hunting trips, the Hogue Grips OM Rubber Remington 870 Stock/Forend showed some signs of wear. The rubber finish, while grippy, seemed to attract dirt and debris, requiring more frequent cleaning. The forend “squishiness” remained a concern.
Durability-wise, the stock and forend held up adequately. There were no cracks or breaks, despite some rough handling in the field. However, the rubber finish showed minor scuff marks and scratches from rubbing against brush and gear.
Maintenance was relatively straightforward, involving wiping down the rubber surfaces with a damp cloth and mild detergent. The rubber’s texture did make it slightly more difficult to remove embedded dirt compared to smoother polymer surfaces. Overall, the Hogue set held up, but didn’t necessarily outperform my expectations.
Breaking Down the Features of Hogue Grips OM Rubber Remington 870 Stock/Forend
Specifications
The Hogue Grips OM Rubber Remington 870 Stock/Forend is designed specifically for the Remington 870 12-gauge shotgun. The stock and forend are molded from a fiberglass-reinforced polymer, providing a strong and stable base. The grip and entire forend are overmolded with Hogue’s signature OM rubber, known for its comfortable and grippy texture.
The stock offers a standard length of pull, suitable for most shooters, and features an ambidextrous ergonomic palm swell for enhanced grip. A soft recoil cushioning buttpad is included to mitigate felt recoil. The Hogue set replaces the factory Remington 870 stock and forend with drop-in ease.
Key features include the rubber overmolding for enhanced grip, the recoil pad, and the fiberglass-reinforced polymer construction. These features aim to improve handling, reduce felt recoil, and increase durability compared to standard factory options.
Performance & Functionality
The primary function of the Hogue Grips OM Rubber Remington 870 Stock/Forend is to improve the ergonomics and handling of the Remington 870 shotgun. The rubber overmolding provides a secure and comfortable grip, especially in wet or cold conditions. The recoil pad helps to absorb some of the kick from heavier loads.
The strengths lie in the enhanced grip and improved comfort. However, the “squishy” forend and somewhat underwhelming recoil reduction are weaknesses. While it does perform adequately, it doesn’t necessarily exceed expectations given the price point.
Design & Ergonomics
The build quality is decent, with the fiberglass-reinforced polymer providing a sturdy base. The rubber overmolding adds a layer of comfort and grip. The weight is similar to, if not slightly lighter than, the factory furniture, making it manageable. The ergonomic palm swell on the stock enhances the grip, but some may find it slightly too pronounced.
Installation is relatively user-friendly, requiring only basic tools and minimal gunsmithing knowledge. However, as mentioned earlier, the “squishiness” of the forend is a design flaw that detracts from the overall user experience.
Durability & Maintenance
The fiberglass-reinforced polymer construction provides a durable base for the stock and forend. The rubber overmolding, while providing a comfortable grip, is susceptible to scuffs and scratches. With proper care, the Hogue Grips OM Rubber Remington 870 Stock/Forend should last for years.
Maintenance is relatively straightforward, involving wiping down the rubber surfaces with a damp cloth and mild detergent. Regular cleaning will help to prevent the buildup of dirt and debris, maintaining the grip and appearance of the stock and forend.
Accessories and Customization Options
The Hogue Grips OM Rubber Remington 870 Stock/Forend is primarily a standalone replacement for the factory stock and forend. It is compatible with standard Remington 870 accessories, such as sling mounts and shell carriers. Some aftermarket forend accessories, like picatinny rails, may require slight modification to fit properly due to the rubber overmolding.
The stock is designed to accept standard Remington 870 sling attachment points. This allows users to easily customize their shotgun with their preferred sling setup. The forend, however, offers limited customization options due to the rubber overmolding.
Pros and Cons of Hogue Grips OM Rubber Remington 870 Stock/Forend
Pros
- Enhanced Grip: The rubber overmolding provides a secure and comfortable grip, even in wet or cold conditions.
- Improved Comfort: The ergonomic palm swell and soft recoil pad enhance the overall shooting experience.
- Easy Installation: The drop-in design makes installation quick and easy, requiring only basic tools.
- Lightweight: The set is lighter than some aftermarket alternatives, which can improve maneuverability.
- Durable Construction: The fiberglass-reinforced polymer provides a strong and stable base.
Cons
- “Squishy” Forend: The flex in the forend can detract from accuracy and control, especially with follow-up shots.
- Underwhelming Recoil Reduction: While the recoil pad helps, the recoil reduction is not as significant as some users may expect.
- Aesthetic: The simple all-black aesthetic is quite plain and not as visually appealing as some alternatives.
Who Should Buy Hogue Grips OM Rubber Remington 870 Stock/Forend?
The Hogue Grips OM Rubber Remington 870 Stock/Forend is perfect for shotgun owners looking for a simple and effective upgrade to their Remington 870. This is especially true for those who prioritize grip and comfort over aesthetics or maximum recoil reduction. Hunters, recreational shooters, and home defense enthusiasts who use their shotguns in varying weather conditions can benefit from the enhanced grip provided by the rubber overmolding.
Those seeking significant recoil reduction or a highly customizable platform might want to skip this product. Alternatives like the Magpul SGA stock offer more adjustability and customization options. Additionally, competitive shooters who demand maximum rigidity and precision from their forend may find the “squishiness” of the Hogue forend to be a detriment.
A must-have accessory for this setup would be a quality sling to take full advantage of the stock’s sling attachment points. Consider also a good cleaning kit to help maintain the rubber finish and prevent the buildup of dirt and debris.
Conclusion on Hogue Grips OM Rubber Remington 870 Stock/Forend
The Hogue Grips OM Rubber Remington 870 Stock/Forend offers a modest but noticeable improvement over the factory Remington 870 furniture. The enhanced grip and improved comfort are definite pluses. However, the “squishy” forend and underwhelming recoil reduction prevent it from being a truly exceptional upgrade.
At a price of $59.46, the value proposition is somewhat questionable. While the Hogue set does provide some benefits, there are other aftermarket options available that offer more features and better performance for a similar price. I found the Hogue to be ok.
Would I personally recommend it? Maybe, with reservations. If you prioritize grip and ease of installation above all else, the Hogue Grips OM Rubber Remington 870 Stock/Forend is a decent option. However, be aware of its limitations and consider exploring other alternatives before making your final decision. Ultimately, the decision to upgrade to the Hogue set depends on your individual needs and priorities.
