HKS SPDLR 32H&R TAU 73 RUGER SP101 Review

First Thoughts on the HKS SPDLR 32H&R TAU 73 RUGER SP101

Speedloaders: they’re the unsung heroes of the revolver world. The HKS SPDLR 32H&R TAU 73 RUGER SP101 promises to bring rapid reloading to revolvers chambered in .32 H&R Magnum, specifically the Taurus 73 and Ruger SP101 32J. The allure is simple: ditch fumbling with individual cartridges and slam a full cylinder’s worth of ammo in one swift motion. This speedloader aims to streamline the reloading process for these popular revolvers.

My interest stemmed from a desire to shave seconds off my reload times at the range. I have a Ruger SP101 32J and was looking for ways to make it more practical for defensive use. Having seen speedloaders dramatically improve reload times for larger caliber revolvers, I was keen to see if the HKS SPDLR 32H&R TAU 73 RUGER SP101 could offer the same advantage.

Unboxing the HKS SPDLR 32H&R TAU 73 RUGER SP101, I was immediately struck by its lightweight and seemingly simple design. The black finish is functional, and the plastic construction feels adequately robust. Compared to speedloaders from Safariland or 5 Star Firearms, the HKS model appears more utilitarian, focusing on functionality over premium materials.

I considered the 5 Star Firearms speedloaders, known for their billet aluminum construction and higher price point. Ultimately, I chose the HKS SPDLR 32H&R TAU 73 RUGER SP101 due to its significantly lower cost. My first impression was cautiously optimistic; I was eager to see if its practical performance matched its budget-friendly price.

Real-World Testing: Putting HKS SPDLR 32H&R TAU 73 RUGER SP101 to the Test

First Use Experience

I tested the HKS SPDLR 32H&R TAU 73 RUGER SP101 at my local shooting range, focusing on speed and ease of use. The range provided a controlled environment to evaluate its performance. I ran through several reloading drills, timing myself to gauge the improvement compared to reloading individual cartridges.

Performance was acceptable, but not as seamless as I’d hoped. The speedloader worked fine, but required practice to master. It felt a bit clunky initially, and it wasn’t as intuitive as the videos I’d seen for other revolvers.

Extended Use & Reliability

After several weeks of consistent use, the HKS SPDLR 32H&R TAU 73 RUGER SP101 is showing no signs of wear and tear. The plastic construction remains intact, despite frequent handling and loading/unloading. Maintenance is minimal; a quick wipe-down with a cloth is all that’s needed to keep it clean.

Compared to my experience with Safariland speedloaders for my .357 Magnum, the HKS model requires more deliberate action to ensure proper alignment and release of cartridges. It doesn’t outperform my manual reloading speed significantly unless I’m focused on the task at hand.

Breaking Down the Features of HKS SPDLR 32H&R TAU 73 RUGER SP101

Specifications

The HKS SPDLR 32H&R TAU 73 RUGER SP101 is designed specifically for .32 H&R Magnum revolvers, fitting Taurus 73 and Ruger SP101 32J models. It’s constructed from durable injection-molded black plastic, keeping the weight to a minimum. The speedloader holds six rounds, matching the cylinder capacity of these revolvers, and it features a twist-knob release mechanism.

These specifications matter because they directly impact the speedloader’s compatibility and ease of use. The specific caliber and revolver compatibility ensure a snug fit and reliable cartridge release. The lightweight construction prevents unnecessary bulk, while the six-round capacity ensures a full cylinder reload.

Performance & Functionality

The HKS SPDLR 32H&R TAU 73 RUGER SP101 performs its primary function adequately: it holds six rounds securely and allows for relatively quick reloading. Its biggest strength is its affordability and ease of carrying. The weakness is the twist-knob release, which can be finicky and requires practice to operate smoothly.

It meets basic expectations for a speedloader, providing a faster alternative to individual cartridge reloading, but falls short of the seamless performance offered by higher-end options.

Design & Ergonomics

The build quality is functional, prioritizing simplicity over aesthetics. The plastic material feels durable enough for regular use, though not as robust as aluminum alternatives. The design is straightforward, but the twist-knob release isn’t the most ergonomic, especially under pressure.

There’s a slight learning curve to mastering the twist-knob release; it requires a deliberate motion to ensure all cartridges are released simultaneously. With practice, however, the reload speed can be improved.

Durability & Maintenance

The plastic construction suggests it will last for a reasonable amount of time with normal use. There are no intricate parts that are likely to break easily. Maintenance is simple: a quick wipe-down with a dry cloth to remove any debris is all that’s needed.

I wouldn’t expect it to withstand extreme abuse, but for range use and occasional carry, it should prove adequate. Repairing the speedloader would likely involve replacing the entire unit, given its simple construction.

Accessories and Customization Options

The HKS SPDLR 32H&R TAU 73 RUGER SP101 itself doesn’t offer any customization options. There are no aftermarket parts or modifications available. Accessories would primarily consist of speedloader pouches or carriers designed to hold the speedloader securely on a belt or vest.

It is not compatible with accessories from other brands, given its specific design for the .32 H&R Magnum cartridge and Taurus 73/Ruger SP101 32J revolvers.

Pros and Cons of HKS SPDLR 32H&R TAU 73 RUGER SP101

Pros

  • Affordable price point makes it accessible to budget-conscious shooters.
  • Lightweight and easy to carry.
  • Noticeably faster reloading than handling individual cartridges with dedicated practice.
  • Durable plastic construction withstands normal use.
  • Simple to maintain.

Cons

  • Twist-knob release can be finicky and requires practice.
  • Not as smooth or reliable as higher-end speedloaders.
  • Limited to specific .32 H&R Magnum revolvers (Taurus 73, Ruger SP101 32J).


Who Should Buy HKS SPDLR 32H&R TAU 73 RUGER SP101?

The HKS SPDLR 32H&R TAU 73 RUGER SP101 is perfect for casual range shooters who want a more efficient reloading method without breaking the bank. It’s also suitable for individuals carrying a Taurus 73 or Ruger SP101 32J for self-defense, providing a slight edge in reload speed.

Those who prioritize ultimate speed and reliability, or those who demand premium materials and construction, should skip this product. Competition shooters, for example, would likely benefit from investing in higher-end speedloaders like those from 5 Star Firearms.

A must-have accessory is a speedloader pouch or carrier to ensure easy access and secure carry.

Conclusion on HKS SPDLR 32H&R TAU 73 RUGER SP101

The HKS SPDLR 32H&R TAU 73 RUGER SP101 offers a functional and affordable solution for speeding up reloads with your .32 H&R Magnum revolver. While it may not be the smoothest or most reliable speedloader on the market, its low price point makes it an attractive option for budget-minded shooters.

At $9.49, the price is definitely justified for what it delivers. It is an improvement over single loading of cartridges. I would recommend it to anyone looking for an inexpensive way to improve their reload times with a Taurus 73 or Ruger SP101 32J.

If you own one of these revolvers and want to improve your reload speed without spending a fortune, give the HKS SPDLR 32H&R TAU 73 RUGER SP101 a try. You might be surprised at how much it helps – with a little practice.


Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top