Hawke Match Mount Rings 9-11 mm 1 in. Medium Review

First Thoughts on the Hawke Match Mount Rings 9-11 mm 1 in. Medium

The Hawke Match Mount Rings 9-11 mm 1 in. Medium are designed to provide a stable and secure platform for mounting scopes on rifles with 9-11mm dovetail rails. Hawke is a well-known brand in the optics and accessories market, and these rings aim to offer a blend of affordability and reliability. These scope rings promise to provide a solid, repeatable mounting solution for smaller caliber rifles, airguns, and rimfires.

I needed a set of reliable rings for a .22LR rifle I was setting up for small game hunting. I was looking for something that wouldn’t break the bank but still held zero consistently. I specifically needed rings that would fit the 9-11mm dovetail rail common on many rimfire rifles, and the Hawke Match Mount Rings seemed to fit the bill perfectly.

Upon unboxing, the rings felt solid and well-made for their price point. The matte black anodized finish looked clean and even. The rings felt heavier than I expected, instilling a sense of durability.

I considered rings from Weaver and UTG, but the Hawke rings seemed to offer a better balance of features and price. The Weaver rings were slightly more expensive, and the UTG rings had some mixed reviews regarding their long-term durability. Ultimately, the Hawke Match Mount Rings stood out due to their recoil stop pin and internal cushion tape.

I was cautiously optimistic about these rings. At this price point, I wasn’t expecting perfection. However, I was hoping they would perform well enough for accurate rimfire shooting and hold zero without constant adjustments.

Real-World Testing: Putting Hawke Match Mount Rings 9-11 mm 1 in. Medium to the Test

First Use Experience

I tested these rings at my local shooting range on a Ruger 10/22 equipped with a 9-11mm dovetail rail. The first session involved zeroing a new scope at 50 yards. Mounting the scope using the Hawke Match Mount Rings was straightforward, the double hex screws allowing for even pressure distribution.

The weather was pleasant, but the rings held the scope firmly in place despite the slight vibrations from firing. After about 50 rounds, the scope remained secure, and the zero held reasonably well. There was no noticeable slippage or movement.

The ease of use was a pleasant surprise. The included recoil stop pin helped to secure the rings, preventing any forward creep under recoil. One initial concern was how tight to tighten the hex screws. After some research, I followed Hawke’s recommended torque specifications to avoid damaging the scope tube or stripping the screws.

Extended Use & Reliability

After several months of regular use, these rings have proven to be quite reliable. I’ve taken the rifle on several small game hunts and numerous range trips. They’ve been exposed to varying temperatures and a bit of moisture.

The anodized finish has held up well, with minimal signs of wear and tear. I clean the rifle and rings after each use, paying particular attention to the screws and mounting surfaces. Regular maintenance involves a quick wipe down with a lightly oiled cloth.

These Hawke rings have performed better than a previous set of budget rings I used, which constantly required re-tightening. The Hawke Match Mount Rings have maintained their zero consistently with only minor adjustments needed over time. This makes them a definite step up in terms of reliability and performance.

Breaking Down the Features of Hawke Match Mount Rings 9-11 mm 1 in. Medium

Specifications

• The Hawke Match Mount Rings 9-11 mm 1 in. Medium are constructed from high-grade aluminum. This material provides a good balance of strength and weight.
• The rings are anodized in a matte black finish. This provides a durable and corrosion-resistant surface.
• These rings are designed to fit 9-11mm dovetail rails. They are also compatible with 3/8″ dovetails due to the reversible dovetail clamp.
• The rings are designed to accommodate scopes with a 1-inch tube diameter. This is a common size for many scopes used on rimfire rifles and airguns.
• Each ring set is equipped with double hex screws. These screws ensure a secure and even clamping force on the scope tube.
• The internal cushion tape prevents marking and damage to the scope tube. This is a thoughtful feature that protects the scope’s finish.
• The 9-11mm models are fitted with a recoil stop pin. This pin helps prevent the rings from sliding forward under recoil, crucial for maintaining zero.

These specifications matter because they directly influence the scope’s stability, accuracy, and long-term performance. A robust construction, secure mounting system, and protective features are essential for reliable shooting. The Hawke Match Mount Rings aim to deliver on these fronts within their price category.

Performance & Functionality

The Hawke Match Mount Rings 9-11 mm 1 in. Medium perform their job admirably. They provide a stable and repeatable mounting solution for scopes on 9-11mm dovetail rails.
The primary strength lies in their ability to hold zero consistently. The recoil stop pin and double hex screws work together to prevent slippage and movement.
The one area that could potentially be improved is the torque specification documentation. Providing more detailed torque recommendations for different scope tube materials could enhance user confidence.

These rings exceeded my initial expectations for their price point. They’ve proven to be more reliable and consistent than other budget-friendly options I’ve used in the past.

Design & Ergonomics

The rings have a simple, functional design with a matte black finish that blends well with most scopes. The weight is reasonable, adding minimal bulk to the rifle setup.
The installation process is straightforward, even for those with limited experience. The internal cushion tape is a nice touch, preventing scratches and damage to the scope tube.
There isn’t a significant learning curve associated with these rings. They are designed to be user-friendly and easy to install with basic tools.

Durability & Maintenance

With proper care and maintenance, these rings should last for many years. The high-grade aluminum construction and anodized finish offer good resistance to corrosion and wear.
Maintaining the rings is simple. Regularly cleaning and lightly lubricating the screws will help ensure smooth operation and prevent rust.

Accessories and Customization Options

The Hawke Match Mount Rings don’t come with any additional accessories beyond the rings themselves. However, they are compatible with a wide range of scopes with 1-inch tubes.
There aren’t any specific customization options for these rings. But their standard design makes them compatible with various rifles that have 9-11mm or 3/8″ dovetail rails.

Pros and Cons of Hawke Match Mount Rings 9-11 mm 1 in. Medium

Check Best Price HERE

Who Should Buy Hawke Match Mount Rings 9-11 mm 1 in. Medium?

• Perfect for: Rimfire shooters, airgun enthusiasts, and small game hunters looking for a reliable and affordable scope mounting solution. These rings are ideal for those who prioritize accuracy and stability without breaking the bank.
• Who should skip this product? Shooters who require quick-detach rings or those using high-recoil rifles with larger caliber scopes. These rings are specifically designed for smaller caliber rifles and airguns.
• Must-have accessories or modifications? A torque wrench to ensure proper screw tightening and avoid damaging the scope tube.

Conclusion on Hawke Match Mount Rings 9-11 mm 1 in. Medium

The Hawke Match Mount Rings 9-11 mm 1 in. Medium offer an excellent balance of performance, durability, and affordability. They are a solid choice for anyone looking to mount a scope on a rifle with a 9-11mm dovetail rail.

The price is absolutely justified considering the quality and features offered. These rings provide a significant upgrade over cheaper alternatives without costing a fortune.

I would definitely recommend these rings to anyone in the market for a reliable and affordable scope mounting solution. They’ve proven to be a dependable and consistent performer in my experience.

If you’re looking for a set of scope rings that will hold zero without emptying your wallet, give the Hawke Match Mount Rings 9-11 mm 1 in. Medium a try. You won’t be disappointed.

Check Best Price HERE