Let’s Dive into GG&G Remington Versamax Scope Mount
The GG&G Remington Versamax Scope Mount promises to be a sleek and reliable solution for mounting optics on the Remington Versamax shotgun. GG&G Tactical has a solid reputation, so I was eager to see if this mount lived up to their standards. I’ve spent years struggling to find a reliable scope mounting solution for my Versamax, a shotgun I primarily use for hunting waterfowl and the occasional turkey.
My biggest gripe has always been finding a mount that doesn’t add unnecessary bulk and holds zero consistently under heavy recoil. I needed a low-profile, durable solution that wouldn’t shift after a few boxes of shells. The GG&G Remington Versamax Scope Mount seemed to fit the bill perfectly with its promise of easy installation and a secure fit. Before settling on this GG&G mount, I considered a couple of alternatives – a cantilever rail system from a lesser-known brand and a gunsmith-installed custom mount.
The cantilever system felt cheap and unstable, and the custom mount was prohibitively expensive and time-consuming. When the GG&G mount arrived, I was immediately impressed by its solid feel and clean finish. It was heavier than I expected, suggesting robust construction, and the black anodized finish looked both durable and aesthetically pleasing. My initial excitement was tempered only by the backorder wait, but the user feedback I read suggested it was well worth the anticipation.
Real-World Testing: Putting GG&G Remington Versamax Scope Mount to the Test
First Use Experience
I first tested the GG&G Remington Versamax Scope Mount at my local shooting range, primarily using it to sight in a new red dot optic. I tested it using a variety of loads, from light target loads to heavy 3.5-inch magnum shells. The conditions were relatively dry, but the air was thick with humidity.
The mount installed easily, just as advertised. The red dot sight held zero flawlessly through over a hundred rounds, instilling confidence in the mount’s stability. I was immediately impressed with how solid and secure the setup felt.
Extended Use & Reliability
After several months of use, including a full waterfowl season, the GG&G Remington Versamax Scope Mount has proven its worth. I’ve subjected it to harsh conditions – rain, mud, and even a brief submersion in a flooded duck blind. There are no signs of rust or corrosion, and the finish has held up remarkably well.
Cleaning is simple; a quick wipe-down with a CLP-soaked cloth keeps it in good condition. Compared to previous mounts I’ve used, this one is vastly superior in terms of durability and reliability. It outperforms even some of the more expensive options I’ve tried in the past, staying rock solid and retaining zero consistently.
Breaking Down the Features of GG&G Remington Versamax Scope Mount
Specifications
The GG&G Remington Versamax Scope Mount is precision machined from 6061-T6 billet aluminum. It is finished with a Type III hard coat anodized non-reflective matte black finish per Mil-Spec. It weighs only 1.2 oz and has a length of 5.5 inches.
This mount is specifically designed for the Remington Versa Max shotgun and is compatible with factory drilled and tapped receivers or receivers drilled and tapped for 6-48 threads. These specifications ensure a lightweight, durable, and secure platform for mounting optics, capable of withstanding the recoil and environmental challenges associated with shotgun shooting. The MIL-STD-1913 configuration makes it compatible with a wide range of optics.
Performance & Functionality
The GG&G Remington Versamax Scope Mount performs its primary function exceptionally well: providing a stable and reliable platform for mounting optics. Accuracy is significantly improved compared to using iron sights, especially at longer ranges. Its simple design makes it easy to use, and it requires no specialized tools for installation beyond the included Torx wrench.
The mount exceeded my expectations in terms of zero retention and durability, but could benefit from a slightly more streamlined profile. It meets my needs perfectly for hunting and recreational shooting, and I have no hesitation in recommending it.
Design & Ergonomics
The build quality of the GG&G Remington Versamax Scope Mount is excellent. The 6061-T6 aluminum feels robust and the hard coat anodized finish is both durable and aesthetically pleasing. At just 1.2 oz, it adds minimal weight to the shotgun.
The low-profile design minimizes interference with the shotgun’s handling. There is virtually no learning curve. Its intuitive design allows for quick and easy installation even for those with limited gunsmithing experience.
Durability & Maintenance
The GG&G Remington Versamax Scope Mount is built to last. Its aluminum construction and Mil-Spec finish resist corrosion and wear. With proper care, this mount should provide years of reliable service.
Maintenance is minimal. Regular cleaning with a standard gun solvent and a light oiling of the screws are all that’s needed to keep it in top condition.
Accessories and Customization Options
The GG&G Remington Versamax Scope Mount is primarily designed to provide a Picatinny rail for mounting optics. It is compatible with a wide range of scopes, red dot sights, and other accessories that use the MIL-STD-1913 (Picatinny) rail system. There are no additional accessories included beyond the necessary Torx wrench for installation, focusing instead on providing a solid base for users to customize with their preferred optics. It is compatible with most common rail-mounted accessories from brands like Aimpoint, Leupold, and Trijicon.
Pros and Cons of GG&G Remington Versamax Scope Mount
Pros
- Rock-solid stability: The mount holds zero consistently, even with heavy magnum loads.
- Easy Installation: Simple to install with basic tools, no gunsmithing required.
- Durable Construction: Made from high-quality aluminum with a Mil-Spec finish for long-lasting performance.
- Low Profile Design: Adds minimal bulk to the shotgun, preserving its handling characteristics.
- Lifetime Warranty: Provides peace of mind knowing that GG&G stands behind their product.
Cons
- Slightly Heavier than Expected: While still lightweight, it’s a bit heavier than some competing aluminum mounts.
- Backorder Wait: Popularity can sometimes lead to delays in shipping.
Who Should Buy GG&G Remington Versamax Scope Mount?
This GG&G Remington Versamax Scope Mount is perfect for hunters seeking to improve their accuracy with optics. It’s also an excellent choice for tactical shooters who want a reliable mounting platform for red dot sights or other accessories. The mount benefits anyone looking for a durable, easy-to-install optic mounting solution for their Remington Versamax shotgun.
Those who prioritize the absolute lightest possible setup might consider alternatives. Similarly, those unwilling to wait for a backordered item may need to look elsewhere. A must-have accessory would be a quality optic, such as a red dot sight or a low-power variable optic.
Conclusion on GG&G Remington Versamax Scope Mount
The GG&G Remington Versamax Scope Mount is an outstanding product that delivers on its promises. It provides a stable, durable, and easy-to-install platform for mounting optics on the Remington Versamax shotgun. The price of $43.99 is more than justified by the quality and performance of the mount.
I would highly recommend this mount to anyone looking to enhance their Versamax with optics. It’s a worthwhile investment that will improve your shooting experience and accuracy. If you are looking for a reliable scope mount for your Remington Versamax, look no further than the GG&G Remington Versamax Scope Mount.