Let’s Dive into Gear Head Works Scorpion Reverse Safety Lever
The Gear Head Works Scorpion Reverse Safety Lever is a simple yet effective upgrade for the CZ Scorpion EVO 3, addressing a common complaint among users: the factory safety lever’s tendency to rub against the trigger finger. Gear Head Works aims to solve this with a reversed lever design, placing the safety in the “fire” position when up and “safe” when down. This allows for a more natural and comfortable grip.
I decided to try the Gear Head Works Scorpion Reverse Safety Lever because, after several range sessions with my Scorpion, that factory safety was digging into my trigger finger, especially during rapid fire strings. It was more than annoying, it was hindering my accuracy. I was looking for a simple, drop-in solution that wouldn’t require permanent modification of my firearm.
Unboxing the lever, my initial impression was that it was small, but seemingly well-machined, especially given the price point. The matte black finish matched the Scorpion’s aesthetics nicely. It felt lightweight, though it was difficult to assess the strength of the aluminum without installing it.
I considered other aftermarket safety levers, but many involved ambi setups or were significantly more expensive. The Gear Head Works Scorpion Reverse Safety Lever stood out because of its simplicity, affordability, and focus on solving my specific issue. My first thought was, “Okay, this looks like it will solve the problem, let’s see if it does.” I was cautiously optimistic, hoping the low price didn’t equate to low quality.
Real-World Testing: Putting Gear Head Works Scorpion Reverse Safety Lever to the Test
First Use Experience
My first range trip after installing the Gear Head Works Scorpion Reverse Safety Lever was a significant improvement over previous sessions. I primarily tested it at an outdoor range focusing on drills that required frequent switching between safe and fire. The weather was dry and mild.
The most immediately noticeable difference was the comfort of my grip. No more trigger finger rub! Transitioning to safe was now a simple downward flick of my trigger finger. The enhanced grip allowed for more consistent groups down range. I experienced no issues with the lever interfering with the operation of the Scorpion.
There were no surprises, thankfully! The installation was straightforward, and the lever functioned exactly as advertised.
Extended Use & Reliability
After several months of regular use (approximately 5000 rounds fired), the Gear Head Works Scorpion Reverse Safety Lever has held up surprisingly well. There are no signs of significant wear and tear. The matte black finish remains intact.
I field strip and clean my Scorpion after every range trip. Cleaning the lever itself is as simple as wiping it down with a lightly oiled cloth. The Gear Head Works Scorpion Reverse Safety Lever has exceeded my expectations in terms of durability and ease of maintenance.
Previously, I had used the stock safety, which, while functional, caused discomfort. The Gear Head Works Scorpion Reverse Safety Lever is a marked improvement, offering better ergonomics and increased shooting comfort.
Breaking Down the Features of Gear Head Works Scorpion Reverse Safety Lever
Specifications
Manufacturer: Gear Head Works. A company known for innovative firearm accessories.
Color: Black. This provides a seamless aesthetic match with most CZ Scorpion EVO 3 variants.
Finish: Matte Black. This helps to reduce glare and provides a non-slip surface.
Fabric/Material: Aluminum. This offers a good balance of strength and weight savings.
Gun Make: CZ. Specifically designed for CZ firearms.
Gun Model: CZ Scorpion EVO 3. Confirmed compatibility.
Hand: Ambidextrous. While this lever fits only the right side, it does not interfere with left-handed operation of the host firearm.
Condition: New. Ensures pristine condition and optimal performance.
These specifications are important because they directly impact the lever’s fit, function, and durability. The aluminum construction, for example, ensures that the lever can withstand the rigors of regular use without adding unnecessary weight to the firearm.
Performance & Functionality
The Gear Head Works Scorpion Reverse Safety Lever performs its intended function flawlessly. It eliminates trigger finger rub, allows for a higher grip on the Scorpion, and makes transitioning to safe intuitive. The lever provides a tactile reference point for the shooter.
The only potential weakness is that the lever only fits the right side of the Scorpion. However, for most right-handed shooters, this is not an issue. The lever has exceeded my expectations.
Design & Ergonomics
The aluminum construction feels solid and lightweight. The lever’s shape is well-designed and provides a comfortable and positive engagement. The matte black finish blends seamlessly with the Scorpion’s aesthetics.
The installation process is simple and requires only basic tools. There is no learning curve associated with using the reversed safety lever. The design is user-friendly.
Durability & Maintenance
The aluminum construction should provide years of reliable service. The matte black finish appears to be durable and resistant to scratches and wear. As mentioned previously, maintenance is simple.
Accessories and Customization Options
The Gear Head Works Scorpion Reverse Safety Lever does not come with any accessories. However, it is compatible with the factory folding stock and most aftermarket grips. The lever itself is not customizable.
Pros and Cons of Gear Head Works Scorpion Reverse Safety Lever
Pros
- Eliminates trigger finger rub. The primary reason for purchasing this lever, and it delivers flawlessly.
- Allows for a higher, more comfortable grip. This leads to improved control and accuracy.
- Simple, drop-in installation. No gunsmithing required.
- Affordable price. A budget-friendly upgrade that delivers significant improvements.
- Tactile feedback. The lever’s position provides a clear indication of the firearm’s safety status.
Cons
- Only fits the right side. Left-handed shooters might prefer a fully ambidextrous option.
- Aluminum construction could be more durable than steel, but has proven reliable so far.
Who Should Buy Gear Head Works Scorpion Reverse Safety Lever?
The Gear Head Works Scorpion Reverse Safety Lever is perfect for CZ Scorpion EVO 3 owners who experience discomfort or irritation from the factory safety lever. It’s also an excellent choice for shooters looking for a more intuitive and ergonomic safety solution. Competition shooters and those who prioritize rapid transitions between safe and fire will appreciate the lever’s design.
Those who should skip this product include left-handed shooters who require a fully ambidextrous safety lever and those who are perfectly content with the stock safety.
A must-have modification to go along with this is a better trigger. The Gear Head Works Scorpion Reverse Safety Lever improves the ergonomics, but a quality aftermarket trigger will drastically improve the overall shooting experience.
Conclusion on Gear Head Works Scorpion Reverse Safety Lever
The Gear Head Works Scorpion Reverse Safety Lever is a well-designed, affordable, and effective upgrade for the CZ Scorpion EVO 3. It solves a common problem, enhances ergonomics, and improves overall shooting comfort.
The price is more than justified, considering the benefits it provides. It is a small investment that yields a noticeable improvement in the firearm’s usability.
I would highly recommend the Gear Head Works Scorpion Reverse Safety Lever to any CZ Scorpion EVO 3 owner seeking a simple and effective safety upgrade. It’s a small change that makes a big difference. If you own a Scorpion, ditch that stock safety and get this lever. You won’t regret it.